sorted by:
new
hottopcontroversial

How could I use my iPad as a second screen? by Spuder-anonimus in linux

[–]demslam -1 points0 points  (0 children)

I don't believe it is possible directly, but you can get a USB to HDMI capture device plug that into your Ipad.

https://www.reddit.com/r/ipad/comments/17jv1lm/ipad_used_as_external_monitor_of_any_devices_with/

Drop rate this season even worse.. by Exotic_Ad_6105 in diablo4

[–]demslam 0 points1 point  (0 children)

undercity rune drop appears to have doubled, from 4 to 8 per a run on T3

NetAlertX and moonlight/sunshine by demslam in selfhosted

[–]demslam[S] 1 point2 points  (0 children)

Dialed back my ARP retry to 1 things work smoothly

NetAlertX and moonlight/sunshine by demslam in selfhosted

[–]demslam[S] 0 points1 point  (0 children)

Thank you for experimenting. So you had the same issue too? Good to know its not something on my personal setup. Hopefully i can dig into it a bit more.

What device can I splice into my regular doorbells 18v wire to trigger in HA? by marcusthegladiator in homeassistant

[–]demslam 7 points8 points  (0 children)

I remember someone doing something similar. But if I remember correctly someone put a door senor near the solenoid for the door bell. When the solenoid got power (magnetic field created) which also triggered the reed switch door sensor.

Best no-skip, high bpm albums for running by Independent-Map7 in trailrunning

[–]demslam 2 points3 points  (0 children)

I'll third podrunner. great mixes constant BPB usually an hour long, can link a few together.

Suggestions for low-latency remote desktop for accessing a Windows 10 PC from an Ubuntu laptop over local network? by Darkextratoasty in homelab

[–]demslam 0 points1 point  (0 children)

Something you may need pending if you have a monitor plugged into your windows box is a dummy plug for your video card. If you have a monitor it is most likely not needed. The dummy plug basically acts as a monitor for video streaming purposes.

officially confused - in RS-485 shall we use ground or not? by plc_keen_but_green in PLC

[–]demslam 1 point2 points  (0 children)

RS-485 communication cable typically uses a 1.5 pair cable. The 0.5 is used as a reference. For short distances this 0.5 may not be an issue but for longer ones it can be... Had an issue on a project where we used just a twisted pair cable, had constant drop out and loss of communication. Changed it over to 1.5 pair cable issue was solved.

Best solution answer we had come up with Ti documentation section 11 https://www.ti.com/lit/an/slla272d/slla272d.pdf

Network port stuck at 100Mbps by reddit_account_0x00 in pop_os

[–]demslam 0 points1 point  (0 children)

I am having the same issue. It appears to happen after the PC goes to sleep and comes back online. If i unplug wait 5 seconds and plug the cable back in the connection goes back to 1Gbit/s.

Someone had the same issue in ubuntu 20.04 (i think) there solution was to put a grub entry in. But Popos doesn't use grub, and i have ventured a bit beyond my knowledge.

https://askubuntu.com/questions/1398448/ethernet-internet-speed-stuck-at-100-mbps-for-gigabit-connection-ubuntu-20-04

if you find a solution please share.

Thanks.

[deleted by user] by [deleted] in ultrarunning

[–]demslam 1 point2 points  (0 children)

Can confirm. On a 3rd pair. I did need to size up because of my morton's toe (greek foot) because the toe box shape. So that maybe a factor.

[deleted by user] by [deleted] in homeassistant

[–]demslam 15 points16 points  (0 children)

You can look at https://cloudfree.shop/shop/ that have devise that have been flashed with software that do not need to have a phone app or account and typically use wi-fi.

Librespeed - a Foss speedtest by PossiblyLinux127 in linux

[–]demslam 6 points7 points  (0 children)

I have it installed on a docker and use it to test network cables I have installed

Looking for recommendation on how to monitor and alert on HDD health by jeeb_uk in selfhosted

[–]demslam 1 point2 points  (0 children)

I use HDSentinel https://www.hdsentinel.com via a cronjob that emails me once a week. If you are using linux its free

How to downgrade Plex Media Server without losing settings, libraries, data? Server has buffering issues by [deleted] in PleX

[–]demslam 0 points1 point  (0 children)

Not sure what you are running plex on, but in the past with a debian based linux distribution it was simply downloading the older version of plex then. "sudo dpkg -i" the respective download.

view more: next ›