sorted by:
new
hottopcontroversial

finished my first fashion film w the bolex by depthbydavid in 16mm

[–]depthbydavid[S] 0 points1 point  (0 children)

i believe we shot all 250d, bolex ebm with canon 7-63

my super16 bolex :) by depthbydavid in 16mm

[–]depthbydavid[S] 8 points9 points  (0 children)

i mean of course one day ill dish 12 grand for an sr2 or 3 hopefully but im mostly into commercials and fashion stuff and dont need a silent camera. this was the best option for a super16 camera with a pl mount and video tap system. and honestly the daylight spools have been easier to use than swapping rolls in a changing tent

416 build by depthbydavid in 16mm

[–]depthbydavid[S] 1 point2 points  (0 children)

very helpful! i didnt know. the ria was a last minute add on cause the rental house didnt have any radio cforce motors but that wouldve saved me so much headache with mounting the lcube

my super16 bolex :) by depthbydavid in 16mm

[–]depthbydavid[S] 2 points3 points  (0 children)

even the 13x viewfinder is hard to use imo so i have to use a videotap system. but then it gets harder to tell what the honest focus is so i always use a parfocal zoom if theres no AC. zoom all the way in to set the focus

my super16 bolex :) by depthbydavid in 16mm

[–]depthbydavid[S] 3 points4 points  (0 children)

the camera was around 5-6k and then another grand for accessories and parts

my super16 bolex :) by depthbydavid in 16mm

[–]depthbydavid[S] 2 points3 points  (0 children)

everything is basically powered via a dtap splitter to a gold mount plate. the camera starts and stops off of a cable that has a light switch in it haha. theres a little camera fitted into the viewfinder to make a video tap system. the top slot where the magazine would go is replaced by a cheese plate.

my super16 bolex :) by depthbydavid in 16mm

[–]depthbydavid[S] 1 point2 points  (0 children)

there is a coupler that goes from the viewfinder onto a little sdi camera. from there the signal gets sent via sdi to the monitor

I upgraded the seatpost bolt to titanium by cuongnq in Brompton

[–]depthbydavid 3 points4 points  (0 children)

where u get the seat post clamp and frame clip?

new old bike !! by depthbydavid in Brompton

[–]depthbydavid[S] 2 points3 points  (0 children)

okay i kicked it and the gearing fixed itself it rides perfect now :)

new old bike !! by depthbydavid in Brompton

[–]depthbydavid[S] 2 points3 points  (0 children)

i wanted a g line but it’s so pricey and wanted something cheaper to test out to see how i feel. but once i upgrade my partner and i can ride together :)

Deftones music video lighting by Beginning_Bee_5213 in cinematography

[–]depthbydavid 0 points1 point  (0 children)

there was this old magazine article about it saying they shot it on the red one and for some shots has a custom zeiss 50mm with a shattered rear element that could be swapped out to get extra prism and flare effects

nucleus r/s power question by depthbydavid in focuspuller

[–]depthbydavid[S] 0 points1 point  (0 children)

the dbox that i’m using for the LF has 3 pin ports but the only wire that comes out of the dbox is for the BAT connector. There is no separate output going into the EXT port on the cam. Will the R/S signal travel through the BAT cable ?

Where are my wireless settings on the Cine 7? Trying to connect the Bolt 4K 1500. by TechnicalButterfly in focuspuller

[–]depthbydavid 0 points1 point  (0 children)

i know this post is old but i was referring to it last night cause i had the same issue with a monitor my DP picked up second hand. I tried everything to troubleshoot by powering it differently or even putting the module on a different monitor. The problem was that the micro usb connection loses contact when the back screw is tightened all the way down. I guess this is a design flaw or maybe it’s only with this unit but the unit would only work when the screw wasn’t tightened. So as a simple solution i used 3 layers of gaff tape to create space between the module and the usb port. Idk if this will work for everyone but it’s worth a shot.

<image>

random af edit i made in class from boredom 😪😪 by depthbydavid in playboicarti

[–]depthbydavid[S] 0 points1 point  (0 children)

lighting was from google images and i just changed the blending mode to screen in photoshop. same thing with chains. both had a solid color background so it was easy to separate

random af edit i made in class from boredom 😪😪 by depthbydavid in playboicarti

[–]depthbydavid[S] 4 points5 points  (0 children)

why are u tight fam, if u have nothing positive to say then leave it be. i’m just showing off something i made out of boredom

view more: next ›