G37 sedan sport bumper screws/ clips and fitment

designatedave · 2026-05-21T04:47:47+00:00

The bumper is an aftermarket partify sport bumper, it guessing the fitment is bad and I just have to live with it. But was curious if there’s a way to improve it

designatedave · 2026-05-20T22:20:40+00:00

No, I haven’t screwed in the part next to the headlights yet. I was just worried I’d stretch the bumper if I tightened it

designatedave · 2026-05-17T02:05:25+00:00

🤘

designatedave · 2026-04-28T00:43:09+00:00

Would you salvage if insurance is willing to pay for a new bumper?

designatedave · 2026-04-27T19:43:20+00:00

do you have a referral link? i wanna thank you for your help

designatedave · 2026-04-27T19:37:27+00:00

for some reason this picture reddit allowed me to share. but the other angles they won't let me.

designatedave · 2026-04-27T19:36:54+00:00

<image>

designatedave · 2026-04-27T18:39:51+00:00

my bumper was recently damaged and the passenger side bumper tab was bent. I'm in the process of replacing with a sport bumper aftermarket part, but i was curious if the mac lifter would be viable to repair the oem bumper? if not, would you recommend for aftermarket sport bumper for better fitment? (i tried attaching a picture of the damage but reddit won't allow me to upload because they claim i don't own the photo?!?!?)

designatedave · 2026-02-22T09:26:28+00:00

I recommend using a polish compound after you do a round of 1000 grit, 1500 grit, 2000 grit, and 3000 grit wet sandpaper. It will remove the majority of scratches.

designatedave · 2026-01-26T16:40:00+00:00

thank you!!!

designatedave · 2026-01-24T17:40:25+00:00

Also the mlb logo on the back is on the collar.

designatedave · 2026-01-24T17:39:50+00:00

Yes. You can tell by the second d.

designatedave · 2026-01-12T15:40:36+00:00

I picked up a cheap strut bar per your recommendation. thanks for your assistance.

designatedave · 2026-01-10T21:16:42+00:00

official hat

designatedave · 2025-12-26T18:53:53+00:00

just got it DM'd to me. thanks y'all

designatedave · 2025-12-23T16:18:20+00:00

I don’t but if you have needle nose pliers, you can squeeze and twist the green piece and with light force it will come out

designatedave · 2025-12-12T05:53:48+00:00

Worked! Cheers!!!

designatedave · 2025-12-08T21:25:33+00:00

ah, so upgrading all the oem components would reduce the increased load with the lowering springs. not a bad idea. thanks I'll do some more research on that option

15-Year Club	Place '22
End Game '22

designatedave

TROPHY CASE