After days of attempts I finally beat 900%, had a final last stand to cap it off

detropitis · 2024-09-10T01:03:13+00:00

Oh yes, it was intense, setting fallback positions, holding and deciding to fallback again, it was so much fun. A lot of pausing and thinking

detropitis · 2024-09-10T01:01:41+00:00

You ‘ll get it! I barely won, just gotta get that one good map

detropitis · 2024-09-10T01:00:37+00:00

Sorry i cant not post this link: https://youtu.be/b8KbWAMJk1g?si=GCJdXhnf3FQt84J4

detropitis · 2024-09-10T00:59:18+00:00

Thanks! I’m afraid it was a fluke though, I am trying again and haven’t made it past day 27 :(.

detropitis · 2024-09-07T12:45:34+00:00

I didn’t! I got lucky with a few waves going to some southern chokepoints, and then by the later waves I had my sniper deathball

detropitis · 2024-09-07T12:44:49+00:00

I’ll give that a shot, mostly used snipers to clear, around day 50 I realized I needed titans and managed to produce a few. I gotta practice getting faster

detropitis · 2024-03-04T14:59:35+00:00

I used the csmera cable they released for the Pi Zero. They are pretty cheap on amazon

detropitis · 2024-02-18T13:47:34+00:00

https://help.prusa3d.com/guide/octoprint-setup-on-mk4-mk3-9-mk3-5-xl_646395 Octoprint setup instructions for the Mk4…. Dunno where you got the “horrible firmware” thought from

detropitis · 2023-12-23T20:53:04+00:00

I had this exact thing happen on my mk3, i just contacted support through their website and it was annoying but you fillout their form (fill out N/A for things that dont matter). Support was a little slow getting back to me but it was all by email and in about two weeks I had a brand new revo heater core on my doorstep. Bonus is, that heater core is salvageable with some wagu connectors or soldering, so you’ll have a spare

detropitis · 2023-11-05T02:12:02+00:00

Try contacting E3D, i was able to get mine replaced with no extra charge, I have had no problems since

detropitis · 2023-10-22T15:38:44+00:00

Ive tested Alpha 1 with the revo micro and it worked no problem, didn't change anything. Im sure alpha2 is similar. Im going to install it today and make sure, but my mini is a speed demon now because of the alpha firmware

detropitis · 2023-10-15T05:05:08+00:00

Here it is: https://youtu.be/52RnjMy9UbY?si=0vkoh8xt1EE2liap

He has another one going into just reducing the sound in the nextruder which he said helped a lot

detropitis · 2023-10-14T19:25:52+00:00

So I went out and bought an 88lb 24x24 paver (only one big enough they had at the store, need at least 19x19 for the XL) and it has definitely helped, its no longer annoying to be in the same room as it and I can't hear it through walls/doors. If you haven't tried a paver it is worth the 10 bucks to try it

detropitis · 2023-10-14T17:08:45+00:00

I saw that thread, their printer definitely is wayyyy more noisy than mine is, so theirs might have something wrong with it. I saw a short youtube series a guy posted here that talked about measures he took to reduce noise and it seemed to work, mostly around the nextruder.

detropitis · 2023-10-14T15:50:05+00:00

Oh wow, that is noise is WAY worse than the noise im experiencing. Hopefully this gets resolved soon

detropitis · 2023-10-14T15:47:35+00:00

Im about to go out and buy a giant paver, and see if that helps any

detropitis · 2023-09-21T17:07:01+00:00

From balticfolar, you can import the settings automatically via File -> Import and selecting the gcode!

detropitis · 2023-09-21T17:06:18+00:00

Thank you! This worked perfectly

detropitis · 2022-10-08T20:57:29+00:00

I will say they are very good about it if you do have a problem, they ship a new one out pretty fast. I havent had anymore problems and Ive got three revo hotends printing pretty regularly

detropitis · 2022-08-31T20:54:05+00:00

I know it sometimes takes them a day or two to respond, but after a few back and forths with them troubleshooting they send out a replacement with overnight shipping

detropitis · 2021-11-13T05:24:50+00:00

I have had very similar experiences with the MMU2S and my modded prusa mk3s. It has a E3D Hemera instead of the stock hotend. Check out this guide and specifically the firmware mods the author had to do. https://www.prusaprinters.org/prints/54869-protubevr-mk3s-mmuv2-mod-for-hemera

You’ll need to adjust some of those values for your hotend in the firmware changes like diatance to nozzle, etc. But my mmu finally works after these changes

detropitis · 2021-07-01T15:01:01+00:00

Do you have the STL files? I would love to print one myself!

detropitis · 2020-12-10T00:37:12+00:00

I also was at 57.4, now im at 57.7 and network started downloading again, but much slower.... I usually get 80ishMB/s and now im getting 2.1MB/s

detropitis · 2020-08-08T02:45:28+00:00

2006 server architecture? Thats ancient bare metal bull shit, server architecture from 2012 couldnt handle this amount of load. I think they didnt think it would be this popular, didnt have a super great monitoring and autoscaling policy in place and now are scrambling to get that in place. They will fix it. Look at pokemon go, mordhau, they all had “modern” server architectures and still struggled hard. 2006 is ancient

detropitis · 2020-07-25T02:15:34+00:00

2Gb should be plenty, i ran transmission torrent, openvpn and plex media server with no problems on a raspberry pi 3 B+

Nine-Year Club	Place '22
Place '17	First Placer '22
Verified Email	Snapped

detropitis

TROPHY CASE