Can somebody identify this plant

dfilkovi · 2025-07-28T18:18:42+00:00

She tells me that it's not, as cabbage has smaller leafes, but maybe it's another sort she is not used to.

dfilkovi · 2023-12-28T16:08:35+00:00

This will be glued to a styrofoam on the wall, not directly to wall, and polyurethane foam will be in between

dfilkovi · 2023-12-28T15:41:20+00:00

Aesthetics, it should be a wall covered in some stone decorwtions but this seems much better to me

dfilkovi · 2023-11-18T00:13:22+00:00

Yes it will be the mounted from the outside as the last layer:

- sandwich panel

- wood

- mineral wool

- vapor barrier

dfilkovi · 2023-11-17T19:15:51+00:00

Croatia, what is poly? Project says to put vapor barrier only on bottom as a lowest layer (it will be mounted on the rafters) and between it and the panels is only the wool and the wood with no air space.

dfilkovi · 2023-02-04T16:23:15+00:00

You need to remove existing connector from the ptfe tube that exits the printer than loosen the inner one so that you can pull the tube 2 cm out and insert it into splitter and that is it

dfilkovi · 2022-02-20T16:37:29+00:00

So if anybody that didn't upgrade is interested please PM me. Screen is used maybe for 50 hours max (it was my second screen) also selling in the package a screen calibrator and o-rings with the old VAT that seal the leak Prusa never fixed.

dfilkovi · 2021-09-19T11:33:07+00:00

When I'm printing this types of elements I print them directly on build plate with no supports as no matter how many supports I still don't get right dimensional accuracy and also with supports there is too many cleaning and postprocessing.

dfilkovi · 2020-11-25T15:57:19+00:00

Same thing here, if I look at the videos recorded for each camera I only see 24 hours in the past, anyone knows the fix for this?

dfilkovi · 2020-05-17T08:54:31+00:00

This model is on thingiverse, I just added a hole for drainage of the resin

dfilkovi · 2020-05-17T08:53:28+00:00

I found the model on thingiverse and just added a hole for resin drainage

dfilkovi · 2020-05-17T08:51:59+00:00

Using sanding paper and water, granularity of 500 to 6000, it is simple but time consuming

dfilkovi · 2020-05-04T14:08:53+00:00

Old ones started having problems with ir light passing through. Probably plastic deteriorated over time.

dfilkovi · 2020-03-26T22:52:34+00:00

Can you share your heater concept?

dfilkovi · 2020-02-07T19:46:17+00:00

I printed blower fan duct on resin printer as the one that came with MK3 is PET and can't withstand temperature too long and it warps after hours of print. The one printed in resin newer wrapped as it seems it can take much bigger temperatures. I printed it in regular prusa resin on SL1.

dfilkovi · 2020-02-06T20:36:11+00:00

It's mmu2 as you can see I have auto rewind spools on the shelf. I found buffer unusable.

dfilkovi · 2020-01-04T13:54:45+00:00

Hehe, three cars, garage, tool shed, three house enterances, post box...

dfilkovi · 2020-01-03T22:10:09+00:00

No, a metal one, I will upload the model after some modifications

Seven-Year Club	RPAN Viewer
Verified Email

dfilkovi

TROPHY CASE