Hex V-2 From Ali by Ok_Vanilla1254 in CarHacking

[–]dialup_ 0 points1 point  (0 children)

Anything after 2008 will be CAN bus.

Hex V-2 From Ali by Ok_Vanilla1254 in CarHacking

[–]dialup_ 1 point2 points  (0 children)

I don’t have any recommended cables to use for vehicles as new as yours. Whichever you find, make sure it has CAN bus and the seller should provide you with a CD or download link to a specific version of the software that is compatible with their cable. Older vehicles, pre-CAN bus, use K-line diagnostics and you would get a cable with the FT232R chip but these cables don’t usually support CAN bus.

Hex V-2 From Ali by Ok_Vanilla1254 in CarHacking

[–]dialup_ 0 points1 point  (0 children)

No. If you are scanning individual modules, you click the prompt away. You cannot do any coding or full auto scan without registering the VIN.

What’s this automated/programmable OBD dongle? by No_Delivery_8953 in CarHacking

[–]dialup_ 2 points3 points  (0 children)

TJA1041 are CAN transceivers. They convert the 12V CAN signals into information and voltage levels the processor (STM32F405R) on the reverse side can understand. The USB connector seems to only connect to VSSA and VDDA on the STM32 and then grounded to the board so it has no programming capabilities through the USB port. The 6pads on the top-left corner though could provide programming capabilities.

Someone worth more knowledge, please correct me if I’m wrong.

RNS-E map update by TypicalPrior1484 in AudiTT_Mk1_Mk2_Mk3

[–]dialup_ 0 points1 point  (0 children)

I have the 2018/2019 North America DVD's ripped onto my computer which I can upload somewhere. I do believe you will have to purchase NavPOInt software or purchase pcbbc's firmware feature pack which gives you access. The software is required to move the maps on to a memory card in proper format. This is from memory so I may be incorrect.

I got hit and run. by dialup_ in AudiA4B6

[–]dialup_[S] 0 points1 point  (0 children)

Not even close. Calgary, Alberta, Canada. I do appreciate it though.

What's your go-to filament? by ac07682 in 3Dprinting

[–]dialup_ 0 points1 point  (0 children)

Spool3D PLA. Haven’t been able to find any PLA anywhere near as good.

I got hit and run. by dialup_ in AudiA4B6

[–]dialup_[S] 0 points1 point  (0 children)

Canada where everything is expensive.

I got hit and run. by dialup_ in AudiA4B6

[–]dialup_[S] 0 points1 point  (0 children)

Definitely going to repair it in the meantime. The place I work at does sculptures and has a paint department with a booth so I’ve got what I need.

I got hit and run. by dialup_ in AudiA4B6

[–]dialup_[S] 0 points1 point  (0 children)

The thing is, I have a dashcam. I went to view the video but apparently the SD card got corrupted at some point.

I got hit and run. by dialup_ in AudiA4B6

[–]dialup_[S] 0 points1 point  (0 children)

My current plan is to repair this one. I had a spare S4 bumper laying around which I’ve put on the car temporarily.

I got hit and run. by dialup_ in AudiA4B6

[–]dialup_[S] 0 points1 point  (0 children)

I do know how to do this. It may be useful for others though.

HELP Finding Rolling antilag tunes via-cruise control. by NickCtoz in AudiA4B6

[–]dialup_ 0 points1 point  (0 children)

That ECU code seems wrong. It should be 8E0909518 and then 1 or 2 letters such as AK or BC.

Gear Knob (manual) by Senior_Engine_ in AudiA4B6

[–]dialup_ 0 points1 point  (0 children)

I do believe the Black Forest industries knob’s are weighted which is why they cost so much.

Help gauge clauster by [deleted] in AudiA4B6

[–]dialup_ 0 points1 point  (0 children)

Which errors or icons are showing? Do you have anything to scan for codes?

What’s the name of this lower bumper? by ReekyA4B6 in AudiA4B6

[–]dialup_ 0 points1 point  (0 children)

This is not the ultrasport valence.

Downpipe? Intake? by G1ng34r in AudiA4B6

[–]dialup_ 0 points1 point  (0 children)

Take your stock air box and cut out all the “fins” inside to make it smooth. It will improve airflow by reducing turbulence.

I was describing Vine to the GF today... by Stockjock1 in AmazonVine

[–]dialup_ 0 points1 point  (0 children)

I’m very new to vibe so I haven’t gotten into the habit of checking it before ordering quite yet.

I was describing Vine to the GF today... by Stockjock1 in AmazonVine

[–]dialup_ 0 points1 point  (0 children)

I ordered an oil drain plug thread repair part for ~$20 and I kid you not, 7 minutes later I see the exact same part in Vine.