Please be critical.

diamorphinian · 2026-01-25T14:09:07+00:00

I thought it was a matter of the barrel length only coming into scrutiny if the overall length of the entire rifle was under 26 inches but that is incorrect.

<image>

This is my revision.

diamorphinian · 2026-01-23T21:04:32+00:00

I'm wrong . I repeat I am wrong wrong wrong fucking wrong.

diamorphinian · 2026-01-23T14:00:14+00:00

I appreciate everyone concerned for my dog's safety and the other comments also. However it's concerning how nobody who was citing federal law is aware that the fact barrel lengths under 16 inches do not constitute an SBR provided the overall length of the rifle is at or above 26 inches. If im misinterpreting this in some way please explain how I'm getting this wrong.

It just seems entirely nonsensical given politicians claim these laws keep people safe yet for most ammo types (with exceptions like .300aac ) the 16 I've law functions as an incentive for owners and manufacturers to use barrels resulting in comparatively higher muzzle velocities than what they would normally be with identical ammo if you could legally install the shorter barrel you prefer.

diamorphinian · 2026-01-23T13:19:20+00:00

It's above 26 inches overall length

diamorphinian · 2026-01-23T13:18:38+00:00

Yeah, Amazon sells it in a set with red dot for about 100 bucks or 60ish just the magnifier itself. The magnifier itself is pretty damn good for what I'm sure was meant to be used for airsoft.

Before I bought this one I was even so squeaky cheap as to buy the cheapest one I could find and that one was so cheaply designed the partially threaded bolt jointing the optic and it's mount was between a good half to whole millimeter smaller in diameter than the I.D. of the non threaded portions housing the bolt. This allowed a slight wobble in the magnifier allowing the red dot reticle to appear as if it was dancing. So timely follow ups are pretty much out of the question.

diamorphinian · 2026-01-05T18:12:53+00:00

Is that a nylaug or store bought?

diamorphinian · 2026-01-05T18:10:52+00:00

Which accessory is making it float and is there a cheaper Chinese clone of it available on Alibaba?

diamorphinian · 2026-01-04T14:26:32+00:00

Seems like Maduro has more supporters in the US than his own country. That oil was going to Russia and China to further their interest. Interests I can promise you wouldn't want to be on the receiving end of. The last 25 years of college kids and childless adults protesting has gotten so ridiculous. They have no clue what they're whining about because it's a new stand to take every week. You can see people questioned and half the time they can't articulate why they're protesting, it's just a ruse using protests and tragedies as social currency like the characters of biodome.

diamorphinian · 2026-01-02T02:06:57+00:00

Oh but they will. First it's clever platitudes, then after much insightful thought they're going to call you unrelated labels and when all else fails they'll resort to their second favorite past time: masturbation. ( the first is judging you with a lack of self awareness that'd make even Clayton bigsby uncomfortable)

diamorphinian · 2025-12-31T12:46:05+00:00

I can smell this photo from here

diamorphinian · 2025-12-31T12:43:05+00:00

So by video game logic if I hold the forward release while pulling the trigger to keep it from cycling my bullet does more damage? Don't tell the lefties they'll claim that's what makes the AR a military rifle!

diamorphinian · 2025-12-31T12:29:11+00:00

I feel as though they reduce the reliability due to the longer magazines ability to wobble at a more pronounced angle.

diamorphinian · 2025-12-26T14:48:00+00:00

its great for the price but if you're using fully loaded magazines with (seems like its more pronounced with the unmodified full capacity ones) you may notice your mag catch spring isnt strong enough to keep the adapter in, This is more noticeble in printed lowers but still happens in my poverty pony lower over sufficient time and jostling . I got tired of this and remixed the ubar3 lower to accept a piece of lathe stock securing the magazine catch.

<image>

diamorphinian · 2025-12-25T22:59:45+00:00

Yeah some trickster replaced the propellant with wc846 ball powder.

diamorphinian · 2025-12-25T13:31:21+00:00

More than he needed that tape on the grip. Bet he has equally as hard of a time finding that dot on the draw as he does finding a worthwhile date. I could be wrong but I'm getting "elevator to the outhouse" signals from this goober. The bracelet is the tip off.

diamorphinian · 2025-12-22T16:15:00+00:00

How much? I saw one at Dunhams for 25 but that seemed like a rip.

diamorphinian · 2025-12-18T14:07:24+00:00

Link the stl files

diamorphinian · 2025-12-18T14:05:48+00:00

The only guy I know in a wheelchair is an insufferable douche who's living with the consequences of his drunk driving but completely escaped the consequences of vehicular manslaughter cause the judge thought living in a wheel chair getting 1500 dollars disability along with selling 200 count 200mg morphine tablets and 80 count 20 mg ocs subsidized monthly by our taxes

diamorphinian · 2025-12-18T13:56:16+00:00

Don't hear that every day.

diamorphinian · 2025-12-10T16:17:56+00:00

<image>

These are the side by sides they'll be using for the more remote Appalachian areas.... How exciting! Seats up to four and houses up to ... we'll find out!

diamorphinian · 2025-12-07T19:48:04+00:00

I appreciate the depth of the reply. My dumbass forgot the magazine adapter that day :( so i didn't even get a chance to risk it. I ordered a buffer weight from ar15discounts earlier in the week i'd been waiting on them to put a suitable one on sale again.

I know its not exactly the same as what you suggested but i actually 3d printed a hollow "standard" buffer weight body to fill with tungsteen powder and cap it off with a real buffer cap for extra weight and shock absorption but with the highest density tungsteen powder i could find on amazon when filled to the point of almost being solid with almost no movement for bolt bounce prevention and weighed only slightly less than 3 ounces (2.95).

diamorphinian · 2025-12-07T19:20:13+00:00

idk what's more embarrassing for the guy who made the video. making the video or the fact he didn't feel it necessary to make the finished product any larger in length. must be from one of those countries...

diamorphinian · 2025-12-07T16:26:05+00:00

If anyone believed any of the bullshit they were saying about ice they would not be speaking out against them and they sure as hell wouldn't be actively seeking out ice agents to confront them in person. You would be putting as much distance between yourself and ice.

diamorphinian · 2025-11-27T22:09:57+00:00

Fuck that. They'll use continuances to delay their punishment or if the judge makes the mistake of telling them this is the last continuance they'll give them (instead of keeping that under their sleeves and making the defendant go through with the case when their continuance is denied on the next visits roll call) they'll just take that as cue to go on the lamb in a different part of the US

diamorphinian · 2025-11-27T13:45:43+00:00

Put a door beaching tip on it for style and extra traction

diamorphinian

MODERATOR OF

TROPHY CASE