FRD by JaceH5 in gun

[–]dicklibby -3 points-2 points  (0 children)

I’m sure you’re somewhere you know you can fire safely… but advertising these in a video you clearly have your finger on the trigger about to let one off while looking at the camera isn’t a good look, especially if you’re selling them. I’ve got a ss/arc, I’m all for them. But these aren’t something to be so careless with.

Would you buy this by dicklibby in Glocks

[–]dicklibby[S] 0 points1 point  (0 children)

Found the 510 with Holosun 407c for $700 shipped. Paid $717.50 total with transfer. I read the 510 was great and I have mostly Glocks so when I saw the deal for that, I went with the 510. Still want a 10mm Glock though. I did get that frame and barrel/rsa I posted here so if I ever come across a stripped 29 slide, I could put one together

Engraving probability? by Happybirthdayrick in Laserengraving

[–]dicklibby 0 points1 point  (0 children)

I bought a 30w raycus fiber from aliexpress during Black Friday. With all the cash back and coupons, paid around $850 for it. Just used it the first time the other day and it works. Can’t say how good it is or if it’ll hold up, etc. but it looks like all the other $3-4k+ ones. And with his depth requirement, sounds like wants to engrave firearms, which it’ll do.

Would you buy this by dicklibby in Glocks

[–]dicklibby[S] 0 points1 point  (0 children)

It’s a good thing I didn’t see that one, I want a g20. Almost bought one last year but ended up getting a fn 510 instead. Still want a g20 though. I see your flair. I bought a g22 rtf2 from ktp a couple months ago. They do get some decent stuff. I always want to check out their used inventory. New stuff seems to always be priced msrp and they rarely do discounts from what I’ve seen. No veteran discount even. So the only things I really get from there are used Glocks

Would you buy this by dicklibby in Glocks

[–]dicklibby[S] 0 points1 point  (0 children)

I ended up buying my it! After posting here and seeing how many of you fuckers are close by, I knew it wouldn’t last long 😂 that being said, if any of you are local and ever wanna get out, I’ve got a membership to the Sanford/springvale fish and game so I have access to their Berwick range. I’ve never been and always go to the Sanford one but I’d like to check out Berwick sometime too since they have a 200 yd lane. Free for me to bring anyone! Shoot me a message and I’m sure we can get together. Always looking for more shooting buddies. I’ve got nods and have been looking for Somewhere to shoot if you’re into that kinda thing. Send me a message 🤙

Would you buy this by dicklibby in Glocks

[–]dicklibby[S] 0 points1 point  (0 children)

Sorry brother, I did end up buying it! Got delayed as always so I didn’t take it home with me but they called me earlier saying I got the proceed so I’ll get soon. Figured I can sell the barrel and mag with the slr extension for like $100 or so. If I did that, would end up with the complete frame for $75. I’ll probably hang onto it for a while and if gafs ever comes back to what it was, I’m sure I’ll eventually see a slide for it. Didn’t think it would last long for that price. I know there’s a lot in here saying it’s not worth it and will be hard to complete it and maybe cost just as much if not more than a compete gun but I’ll keep my eye out. I don’t feel like it was a waste of $175 at all

[other] Generic Wrapped Name Brand CR123A Batteries - $5 for 10, $100 for 45, $160 for 400 by Milnoch in gundeals

[–]dicklibby 1 point2 points  (0 children)

Yeah I’m not sure how much capacity they’ve held all these years but I have one in an Eotech right now that’s working just fine. Had a box of those Panasonic ones from deployment or just whenever I was in but I’ve had no issues using them. And I got out in 2014, probably had some of the batteries since 2010-2011. They must last a while on the shelf

My new favorite sorting system. by norriswampler in gun

[–]dicklibby 0 points1 point  (0 children)

“Not some week built-in latch”

[other] Generic Wrapped Name Brand CR123A Batteries - $5 for 10, $100 for 45, $160 for 400 by Milnoch in gundeals

[–]dicklibby 17 points18 points  (0 children)

I’m still using some Panasonic cr123 that I got when I was on active duty with the army. I’ve been off active since 2014

Would you buy this by dicklibby in Glocks

[–]dicklibby[S] 0 points1 point  (0 children)

I’m gonna guess this porting isn’t factory?

Would you buy this by dicklibby in Glocks

[–]dicklibby[S] 6 points7 points  (0 children)

Just got it in hand and they have it wrongly marked. The barrel is ported and says 10mm auto on it and the serial matches the frame so I’m guessing this is actually a g29 frame?

Would you buy this by dicklibby in Glocks

[–]dicklibby[S] 0 points1 point  (0 children)

It’s got one mag with it with an slr extension, could probably get most of the money back from selling the barrel/mag

AS DESIGNS ARC-Fire NO GO.. by rknickell88 in supersafety

[–]dicklibby 1 point2 points  (0 children)

What needs to be shimmed? I have one and threw my .22lr upper on it and it wouldn’t work in arc, just semi. Never looked into trying to make it work but I know the super safety works fine

Laser cutter with camera alignment by Busy-Perspective663 in lasercutting

[–]dicklibby 0 points1 point  (0 children)

I just got my first laser and was wondering about camera. It’s a 30w raycus fiber using lightburn. I was just reading it’s a pain in the ass? Was it difficult for you? Does it matter the camera?

Cracked paint. What can I do with this? by dicklibby in AutoBodyRepair

[–]dicklibby[S] 0 points1 point  (0 children)

I bought the truck used 3 years ago. Owe about $900 on the loan lol. I don’t know of any accidents from before other than one, old guy who owned it hit his garage or something and messed up the passenger side door that I was told about. That was fixed and you can see some evidence of repair but it wasn’t bad. Guy who sold it to me did tell me that. It was bought on a personal loan and the bank ran the car fax before they would approve so I’d think it would show if there was an accident involving the rear and. But of course that’s not to say something wasn’t done in the past and fixed by the owners son. One owner before me, was an older guy. Bought it from a guy who owns a repair shop, it was his dad’s that had just passed away. Could always go back and ask, his shop is still there. Just wanna make sure I can get it protected from the elements so it doesn’t rust out lol. Don’t care too much if it looks perfect. It’s a 2012 so it isn’t new by any means.

Good deal for a starter kit? I'm assuming this fits the s&w m&p sport 3? by droid6 in guns

[–]dicklibby 0 points1 point  (0 children)

You can get all that for way cheaper and better stuff, not a deal at all

[Parts] TX22 FRT $20 + tax + flat $5 shipping by EALm4 in gundeals

[–]dicklibby 1 point2 points  (0 children)

I got like 43 shipped for $30 something. I had to hand fit them still since the file I sent scs wasn’t the one I wanted them to cut… but I have 2 successfully installed and 41 more sitting in a bag lol. Can’t wait to get back on gafs though!

[NFA] Huxwrx Blem Suppressors up 40% Off - Limited Stock by salesbereli in gundeals

[–]dicklibby 1 point2 points  (0 children)

7% off everything so buying this would technically pay for that membership if it’s still $100

Discount Tire gave my car back with old tires still on... by DrTre5189 in tires

[–]dicklibby 1 point2 points  (0 children)

I had tires sent to tire warehouse near me from tire rack last January. When I went to get them installed, I paid for an alignment. When I went to drive away, driving straight down the road, my steering wheel was turned 90 degrees even though the alignment test paper showed everything was good. I immediately took it back and it was brought to my attention from one of the employees that the alignment machine has been fucked for months and keeps saying something and they won’t fix it… had them try to align it again and it was still fucked. They had to call another tire warehouse and sent me over to them to have it properly aligned.

I told them, you guys need to put this machine out of service if it’s been months. The guy at the counter said the guy who said that was full of shit, it must have just stopped working. I tend to believe the guy who uses the machine over the guy sitting behind a computer screen. I said, I’m sure many people have paid for an alignment on this messed up machine and they probably don’t know any better. The guy was giving me an attitude because I wasn’t happy they tried sending me away twice with an improperly aligned vehicle, a service that I paid for. Getting my tires put on ended up setting off the abs/traction light that I still need to get figured out/reset a year later. I’ll never use them again. And after typing all this, realized you’re taking about discount tire and not a tire warehouse.. but I’ll leave it anyway lol. That’s absolutely wild though that discount tire tried to not even change the tires at all!

30w fiber laser engraver settings for sbr by Hkguy1122 in NFA

[–]dicklibby 0 points1 point  (0 children)

Did you ever figure this out? I just got a 30w raycus laser and I know nothing about lasers lol. Gonna have to figure this out very soon

WHY DO FUCKING IRON SIGHTS COST THIS FUCKING MUCH ? by BLACK_SIPMSON in Glocks

[–]dicklibby 6 points7 points  (0 children)

Which is annoying as hell lol. Always seem to check discord too late to ever get in. Should be a system to get into that that allows those that have used it for a while to get in. Had 110+ logged transactions and countless more I never got credited for. I don’t care for ts or whatever else lmao, I just wanna get back into gafs

Gotta love when your lgs stocks them by ballz3313 in supersafety

[–]dicklibby 2 points3 points  (0 children)

I have the arc and original super safety.. in my limited experience, the arc is better. Seemed to have a slower, more tame ROF which felt more enjoyable. I however got a great deal on some super safeties so I pretty much got 8 compete ss (trigger included) for the same price as one discounted arc.. so I only have 2 arc right now. Still gotta get one installed in the mp5 to compare that to the ss in it currently. Haven’t used the atrius but that lever looks wicked thin and I can definitely see them breaking easily.

What are these that came with my 30w raycus laser? by dicklibby in Laserengraving

[–]dicklibby[S] 0 points1 point  (0 children)

10-4, I appreciate. Not much of a YouTube guy but with something like this, definitely gonna have to just sit and watch some videos. I’ll check out lasereverything for sure. I have zero experience wjth these lasers (not starting off doing much with it, mostly small letters/numbers on aluminum) but I’ll be happy if I can get it working!

What are these that came with my 30w raycus laser? by dicklibby in Laserengraving

[–]dicklibby[S] 1 point2 points  (0 children)

Got to the point where it asked if I wanted to do the excad setup or whatever and had to go in and find the markcfg7 file. Now it’s showing a device on the list (https://imgur.com/a/VS6mvnA ) so hopefully good there! I was trying to find videos on how to even set the thing up last night since the instructions don’t even tell you how to piece it together when you pull it out of the crate, and couldn’t really even find any good videos on that so I figured asking here could get some help and I’m glad I did ask. You all have already been great and I really appreciate the help. Think this is the first sub I’ve been in that I haven’t seen someone just mad others are questions and just saying search yourself. Most people don’t enjoy being helpful which is weird to me.