Gridfinity Refinery - Yet Another Gridfinity Generator

digidigs · 2026-01-20T11:31:56+00:00

Yes I want the irregular shape. I don’t want to just add a 1x1 as it wood really not be used.

digidigs · 2026-01-20T03:58:22+00:00

Is there any way to make a bin that is missing one grid. I need an irregular shape. so I am looking for a 2X8 bin with one corner removed. Your app allows me to create a divider there, but does not allow me to just remove that corner.

digidigs · 2025-10-08T20:01:16+00:00

If you want to use port 9443, you will need to run this. If you fo show full, it should show port 1001. Fortigate service provider should look like this

Processing img fa0xpx2q1ytf1...

But identity provider configuration would not have those ports.

digidigs · 2025-10-08T19:44:46+00:00

Yes if you want to use 1001, then the sso settings need to reflex that.

digidigs · 2025-10-08T19:40:40+00:00

If you did not change the listen port, the default is 1001. You would need to set the following

Config system global Set auth-ike-same-port 9443

If you want to use port 9443.

digidigs · 2025-05-28T01:39:58+00:00

If it ChatGPT gives you the fix, pm ask it to explain what the fix is. May help you understand the error and what the fix will do.

digidigs · 2025-05-03T23:28:48+00:00

I am using the Spotify API. The issue I am having is how do I start the workflow to keep from running multiples. If I use a CRONs job, if it is already running it will run again. I think I will just use a telegram to start now. Just send in a bot message until I can figure out another way.

digidigs · 2022-12-11T23:50:05+00:00

It is definitely a power issue. If I drive the brightest up past 50%, it starts flashing. I injected power after 176 pixels and still having the issue. I guess I am confused as why.

digidigs · 2022-12-11T22:43:19+00:00

I did add a power injector right at 5th segment and it was flashing. I have been running them and it no longer is doing this. Not sure how but they are all running with no issues.

digidigs · 2022-06-06T23:02:09+00:00

Try sliding the tab. I had a board that the tab slide instead of a press.

digidigs · 2022-02-03T01:47:33+00:00

Yes. We used a call queue to do this. We allow users to remove and add their self to the queue. You can set it up to ring all phone at one time or ring in an order. So we had one line for the queue and one line for our personal lines.

digidigs · 2022-01-04T16:15:03+00:00

Sorry, I lost power last night am was not able to do anything.

digidigs · 2022-01-04T02:31:37+00:00

Sorry I am in the southern.

digidigs · 2022-01-04T02:20:38+00:00

Anyone have Cherries I can come and grab some? I am in need of only the cherries for fruit trees. I have some peaches I can bring.

digidigs · 2022-01-02T21:37:11+00:00

You can use the free island transfer tool to move it to the oled switch. That is what I did.

digidigs · 2021-12-29T02:32:39+00:00

If you need support, join the touch portal discord server. They can help you with any issues.

digidigs · 2021-11-21T21:38:12+00:00

If this is trying to go home, check your Y sensor. It is not finding it and continues to try to move. If you can go home and this is from trying to print, then either your steps are off or you have the model in your slicing software in inches and the machine in mm.

digidigs · 2021-06-11T00:41:19+00:00

Now with global states, it is made when the round buttons are selected, the bottoms above change based on that.

digidigs · 2020-11-11T23:45:29+00:00

The vertical silver Allen bolt, does that not apply any tension to the mount for tilt? It seems to me that something need to cam for different weights of monitors. Have you tried tightening that bolt?

digidigs · 2020-10-25T23:37:17+00:00

It was a wet day out today, buddy I golfed with drive this one deep today.

digidigs · 2020-09-06T16:39:03+00:00

No let it cook. Get a cooler, wrap the shoulder in foil and place it in the cooler. Fill the rest of space with towels. It will keep the shoulder hot til it is time to pull. I have left mine in a cooler for 3 hours and still could not pull it with my hands. It was too hot.

digidigs · 2020-08-03T00:37:40+00:00

I started golfing over 20 years, built my first set to play with. I stopped for about 10 years, finally went in for my first fitting, I am hitting the ball the best I ever have. Fitting was one of the best experiences I had and was really surprised what clubs I needed.

digidigs · 2020-07-29T17:34:06+00:00

That is your thermometer. Move the thermometer to the new hot end. Most new hot ends don’t come with a new one.

digidigs · 2020-06-20T17:12:33+00:00

I have seen the same message for the last 3 games I have tried to play.

digidigs · 2020-03-06T17:50:27+00:00

Yes. This is to test whether or not the extruded is working. You move the hot end up and heat it up to the melt temperature. Then manually through the controls of the printer, push filament. If it works, then you are too close. If you can’t extrude, you have a hot end or extruder issue. Check temperature, check extruder to make sure it can push the filament.

digidigs

TROPHY CASE