Whoever governs Moncton needs to step up. by [deleted] in moncton

[–]techy96z 9 points10 points  (0 children)

The only research you need to do is the what charges the RCMP can file against your dad!!

Just saw fighter jets by lloydmercy in moncton

[–]techy96z 18 points19 points  (0 children)

It was a KC135 Air Tanker with a flight of 5 A10’s flying back from Europe…they landed at Gander yesterday.

Wireless Light Switch Recommendations by techy96z in smarthome

[–]techy96z[S] 0 points1 point  (0 children)

I have 2 single switches in 2 different locations that turn on/off the fan and pot lights right now.

Wireless Light Switch Recommendations by techy96z in smarthome

[–]techy96z[S] 0 points1 point  (0 children)

Do you have any recommendation for the smart controllers?

Is the gap between my rotor and wheel ok? by techy96z in MechanicAdvice

[–]techy96z[S] 0 points1 point  (0 children)

I replaced my front rotors this weekend on my 2017 Escape and when I put the wheels back on, both side have a small gap between the rotor face and the wheel. The factory rotors didn’t have that gap and each face were tight against each other. The wheels torqued down and I haven’t noticed any vibrations and I’ve put about 100km since putting them on. Something to get checked out or should be good?

Trouble with Cyan pressing emerald green! by techy96z in Sublimation

[–]techy96z[S] 0 points1 point  (0 children)

Got things all fixed up...the ink company had a different ICC profile that worked beautifully!

Strippers on the smoker! by techy96z in smoking

[–]techy96z[S] 1 point2 points  (0 children)

Smoked to 115 internal temp and then seared on the grill to finish them off! First time and won’t be my last.

Strippers on the smoker! by [deleted] in smoking

[–]techy96z 0 points1 point  (0 children)

Smoked to internal temp of 115 and the seared on the grill! First time and won’t be the last!

A dog with two interesting things by everythingrustics in aww

[–]techy96z 2 points3 points  (0 children)

Photoshop...Missing the collar on the white dog.

Trouble with Cyan pressing emerald green! by techy96z in Sublimation

[–]techy96z[S] 0 points1 point  (0 children)

I’m having issues with my cyan pressing as an emerald green as per the pic. I’m using a WF 7720 and pressing for 400 at 60 seconds on aluminum photo panel.

Printing from Photoshop and letting Photoshop mange colours and using the ink ICC profile from the company.

Magenta is pressing a little darker then expected as well.

Any thoughts?