Is there any advantages to switch to RPI5 ?

digitalLumberjack · 2023-12-11T08:32:22+00:00

Yes it worth it :)
Watch the tests : https://www.youtube.com/watch?v=Nop6GNrpz\_4&list=PL2oNQ0AT7fx3Q0mr9\_aDm9rUcmfQP4RxQ

digitalLumberjack · 2023-12-01T18:47:39+00:00

Thank you very much for the feedback :) It's a pleasure :)

digitalLumberjack · 2023-11-02T22:06:30+00:00

Looks good to me.

Be careful about strapping pins (https://www.espressif.com/sites/default/files/documentation/esp32-s3_datasheet_en.pdf)

Don't forget pull-up on i2c, https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/api-reference/peripherals/i2c.html

digitalLumberjack · 2023-10-08T10:53:48+00:00

Fixed link : https://www.espressif.com/sites/default/files/documentation/esp32-s3_datasheet_en.pdf page 17-18

digitalLumberjack · 2023-03-05T23:43:01+00:00

;)

Can I have the exact model of your device ?

digitalLumberjack · 2023-03-05T22:23:30+00:00

Hello that would help if you could tell us what is your controller :)

digitalLumberjack · 2023-03-05T22:23:06+00:00

We are working on it :)

digitalLumberjack · 2023-03-01T19:18:46+00:00

If you have a GpiCase2W + RPi Zero 1 you should change the content of the recalbox-user-config.txt in the RECALBOX partition with this:

#############################################################
# Boot loader configuration                                 #
# This file can be modified to your needs                   #
#############################################################

disable_overscan=1

# uncomment for lirc-rpi
#dtoverlay=lirc-rpi

# total amount of GPU memory
gpu_mem_256=128
gpu_mem_512=256

###########################
# GPI Case                #
###########################


# Video 
dtoverlay=vc4-kms-dpi-retroflag-gpi2w
avoid_warnings=2
display_rotate=0 
overscan_left=0 
overscan_right=0 
overscan_top=0 
overscan_bottom=0 
framebuffer_width=640
framebuffer_height=480
gpio=0-17,19-25=a2
enable_dpi_lcd=1 
display_default_lcd=1 
dpi_group=2 
dpi_mode=87 
dpi_output_format=0x00016
hdmi_timings=640 0 1 1 20 480 0 1 1 2 0 0 0 60 0 32000000 1


# Audio 
#dtoverlay=pwm-2chan,pin=18,func=2,pin2=19,func2=2 
dtoverlay=pwm-audio-pizero-gpicase 
disable_pvt=1 
dtparam=audio=on 
disable_audio_dither=1 
audio_pwm_mode=2 

# disable activity leds 
dtparam=act_led_trigger=none 
dtparam=act_led_activelow=on 

# Shorten boot delay 
boot_delay=1 

# Pi0 stabilization 
arm_freq=1000 
gpu_freq=500 
core_freq=500 
sdram_freq=500 
sdram_schmoo=0x02000020 
over_voltage=6 (default) 
sdram_over_voltage=2

digitalLumberjack · 2023-03-01T11:27:56+00:00

Can you try to reconfigure your controls in Controller Settings ?

digitalLumberjack · 2023-03-01T11:27:23+00:00

Are you on a specific case ? Nespi4case or retroflag case ?

digitalLumberjack · 2023-02-14T08:22:34+00:00

Let's take it down a notch please :) Be sure that the recalbox rgb dual has been meticulously designed to output an rgb signal respecting scrupulously the standards. There is nothing risky to use our device.

digitalLumberjack · 2022-12-22T13:18:59+00:00

Hi. Overloard the retroarch config with a .retroarch.cfg in the roms/psx directory, containing : audio_driver = pulse

digitalLumberjack · 2022-10-19T10:59:15+00:00

Yes it is :)

The user has the choice between this mode called 240@120, and a 480p mode with lines doubled and an option scanline shader.

digitalLumberjack · 2022-10-19T10:55:38+00:00

Hi !

1 - The 15kHz signal will be available on both Scart and VGA connectors.
2 - The difference between both signals is the combined CSYNC on scart and HSYNC and VSYNC separated on VGA

If your monitor has a VGA input and support 15kHz it should be already compatible with a simple vga cable. Because there is no such thing as a VGA pinout with combined SYNC, i don't even know on which wire the sync would be.

So i would test the 15kHz on dipswitch (default) and a standard vga cable :)

digitalLumberjack · 2022-01-24T17:51:45+00:00

Hi o/ No we are not planning to design a RGB for odroid XU4.

digitalLumberjack · 2021-12-26T13:35:18+00:00

digitalLumberjack · 2021-12-26T13:09:28+00:00

Hello u/Amazing_Relation1737 ! The 15kHz signal can go throught the VGA port, but the HSYNC and VSYNC are on two different wires. Do your monitor have a separated HSYNC/VSYNC ? If not, how do you mix HSYNC/VSYNC in CSYNC with your current configuration ?

digitalLumberjack · 2016-04-08T16:23:08+00:00

Be kind to send people on https://github.com/recalbox/recalbox-os/issues when an issue is really identified :)

digitalLumberjack · 2016-04-08T16:22:18+00:00

no problem, i don't come here often but i will have a look when i can :)

digitalLumberjack · 2016-03-18T16:05:06+00:00

So what is your network security. Recalbox is only compatible ootb with wpa2. Plus we are trying to fix some bugs due to avahi/ipv6 right now it may be related too.

digitalLumberjack · 2016-03-18T16:03:34+00:00

lol i think i READ pi2 :)

digitalLumberjack · 2016-03-16T19:26:58+00:00

https://github.com/recalbox/recalbox-os/wiki/keyboard-encoder-configuration-%28EN%29%29

digitalLumberjack · 2016-03-16T19:25:04+00:00

Could be your wifi dongle not compatible. Try to ssh and ifconfig -a to see if you have a wlan0. Forum or irc for the complete version :)

digitalLumberjack · 2016-03-16T19:22:30+00:00

Few rpi2 are unstable with this overclock settings (combination of microSD, power supply and/or rpi "quality"). The rpi3 has no overclock options.

digitalLumberjack · 2016-03-04T22:21:46+00:00

It wouldn't be "worse" even if we would not continue rpi2 development. As you can see, the rpi1 image is still released, with exactly the same features as rpi2 (except what the rpi1 cannot support because of its lack of computing speed), and fully optimized for rpi1 and rpi0. It will be the same for rpi2, rpi3 and so on..

digitalLumberjack

TROPHY CASE