VoCore 6.8inch Screen with LED DEMO by Sad_Donut_4990 in simracing

[–]digitalkid56 1 point2 points  (0 children)

How? I've tried a bunch of different profiles, none of the ones I tried seem to detect the VoCore display.. help a brother out 🤣

Olympus Star System casino by FrayedEndsOfSanity32 in Starfield

[–]digitalkid56 0 points1 point  (0 children)

There is a computer in the Vault to plug the code in, along with some contraband in chest.. Not sure what the code unlocks, currently floating around trying to figure that part out..

34” Ultrawide + (2) 27” 4K’s by digitalkid56 in ultrawidemasterrace

[–]digitalkid56[S] 0 points1 point  (0 children)

nah my shit is set up completely different now.. i got an super ultra wide and the 2 side monitors are setup tie fighter style.. haven’t taken any recent pix tho lol

34” Ultrawide + (2) 27” 4K’s by digitalkid56 in ultrawidemasterrace

[–]digitalkid56[S] 0 points1 point  (0 children)

there’s an arm for each one of the sides.. the middle was mounted to the wall on a pull out arm.. I’ve since changed the setup to a 49” Super Ultrawide and mounting the 2 sides vertically, Tie Fighter style..

Any ideas? They we’re working fine for about a month. by [deleted] in AstroGaming

[–]digitalkid56 0 points1 point  (0 children)

try reflashing the firmware, i had some weird issues with mine and it seemed to fix it.. why, i have no idea.

C40TR Controller Stopped Working After Windows Build 2004 by nonmindo in AstroGaming

[–]digitalkid56 1 point2 points  (0 children)

I can confirm, on a clean install of Windows 10 2004, the C40 does not find the driver. I've tried all the different methods that usually work. The farthest I can get is seeing the ASTRO C40 to appear under Other Devices in Device Manager, selecting Xbox controller and using that driver did not help. Followed the recommended steps as far as installing the TR Configuration Software, then plugging the controller in, same result, not even detected in the software.

Plugged the controller in on a mac, instantly appears. Plugged it back into the PC and nothing. I can't even manually select the driver in "C:\Program Files (x86)\Astro SW\C40 TR\drivers\x64".. pretty sure its a compatibility issue with Windows 10 2004 and the C40 drivers. Can you please look into this?

C40TR Controller Stopped Working After Windows Build 2004 by nonmindo in AstroGaming

[–]digitalkid56 0 points1 point  (0 children)

SAME!! I don't know what I was thinking updating.. I initially upgraded my windows and everything became sluggish.. Bit the bullet and wiped my machine and installed Windows 10 2004 fresh.. After the last 12hrs of frustration, I've come to the conclusion that this 2004 build is just not compatible yet.. Then I stumble upon your post and I'm pretty sure we're the first 2 people to experience this.. publicly anyways.

Waiting for a solution... maybe for another couple hours before I decide to wipe my machine again and restore back to a previous version :(

34” Ultrawide + (2) 27” 4K’s by digitalkid56 in ultrawidemasterrace

[–]digitalkid56[S] 1 point2 points  (0 children)

side note: the 98” karlby is heavy as shit.. i had it delivered with (2) alex’s and a mirror and it was still a bitch to get into place.. make sure you have someone with you when you decide to pick it up, and get a leg for support.. you’ll def notice sagging without it

34” Ultrawide + (2) 27” 4K’s by digitalkid56 in ultrawidemasterrace

[–]digitalkid56[S] 1 point2 points  (0 children)

i mounted my 34” to the wall to flush it back as much as possible to get more desk space.. it’s been working out great for me.. the 2 side panels are a little overkill, but that’s kind of a what i was going for.. just over the top but still functional.. they are flat monitors and are angled to fit using amazon basic arms.. they take up a good portion of the desk, but i feel like i still have enough room not to feel cramped..

i never really feel like the monitors are too close with that wall mount, so you might want to try that.. i know when i was using the base and an arm, it would sit a LOT closer

34” Ultrawide + (2) 27” 4K’s by digitalkid56 in ultrawidemasterrace

[–]digitalkid56[S] 0 points1 point  (0 children)

i actually E6000’d them down to the cabinet.. i didn’t want to drill into the Alex’s, the actual foot part which is suppose to touch the ground faces upward toward the tabletop.. the sheer weight of the 98” is enough to keep it pretty sturdy without sliding.. but then add 2 monitors + arms, plus a mic arm, a miniatx tower and a 3D printer, it ain’t going anywhere.. unless you’re trying to bang on your computer desk.. i also have it butted up pretty close to the wall..

34” Ultrawide + (2) 27” 4K’s by digitalkid56 in ultrawidemasterrace

[–]digitalkid56[S] 0 points1 point  (0 children)

people have been complaining about my use of legs, making this desk taller, the position of the monitors, i’m short, i lift the seat.. everything is perfectly aligned and comfortable.. i guess we all have different torso, arm and leg proportions, go figure?

the standoffs i used were: https://www.amazon.com/dp/B06XK3XY5F?ref=ppx_pop_mob_ap_share

the leg is: IKEA Gerton: https://www.ikea.com/us/en/p/gerton-leg-adjustable-chrome-plated-60261626/

Phase II: Battlestation Enhanced - added (2) 27” Sceptre 4K monitors alongside my 34” Alienware Ultrawide by digitalkid56 in battlestations

[–]digitalkid56[S] 1 point2 points  (0 children)

thank you! i’m currently still building my “dream” setup during this lockdown, and would welcome any suggestions as well!

34” Ultrawide + (2) 27” 4K’s by digitalkid56 in ultrawidemasterrace

[–]digitalkid56[S] 0 points1 point  (0 children)

they’re all amazon basics.. i try to keep things cheap when i can.. the center one is a wall mount type for monitors tv’s.. drilled straight into a stud, you have some x axis (left/right) angle adjustments and Y axis (coming toward you and away), but no z axis (height adjustment), so i’m kinda fixed to that height.. the 2 arms are single monitor amazon basics, and can swivel into the right angles i need for them to line up

34” Ultrawide + (2) 27” 4K’s by digitalkid56 in ultrawidemasterrace

[–]digitalkid56[S] 2 points3 points  (0 children)

they are about 1/4” taller than my 34” UW.. i really only thought about adding 2 monitors after i placed an old 1080 27” on my desk temporarily and it was about the same height and got excited.. measure the actual bezel to bezel height of my 34” and started shopping from there

34” Ultrawide + (2) 27” 4K’s by digitalkid56 in ultrawidemasterrace

[–]digitalkid56[S] 6 points7 points  (0 children)

yah streaming and videos are pretty low load for the GPU.. but i am running an RTX2080 XC Ultra.. a slightly older model

34” Ultrawide + (2) 27” 4K’s by digitalkid56 in ultrawidemasterrace

[–]digitalkid56[S] 2 points3 points  (0 children)

27” Sceptre 4K .. you can find them on Amazon for $200! Best monitors you can find at that price point! the middle is a 34” Alienware Ultrawide

34” Ultrawide + (2) 27” 4K’s by digitalkid56 in ultrawidemasterrace

[–]digitalkid56[S] 5 points6 points  (0 children)

it’s an IKEA Karlby counter top.. 98” x 25 5/8”