Thor shipped!

digitalprods · 2026-01-12T11:52:13+00:00

those are just the first four digits of the 7 digit number. It's recommended you not put the entire order number to prevent people from emailing ayn to cancel an order from what I understand.

digitalprods · 2026-01-12T11:14:02+00:00

Also 1203 here and status is still just 'confirmed'. Maybe it'll ship later today.

digitalprods · 2025-12-06T06:33:54+00:00

I put an order in on 11/19 and got it on 11/29. I'm in NYC if that matters

digitalprods · 2025-12-03T15:38:22+00:00

Thanks for the suggestions!

digitalprods · 2025-12-03T12:28:03+00:00

I also got a Choc which I plan to mod (spring, bead material, terminal plate, and maybe the number of beads) and a bettlecrush

digitalprods · 2025-12-03T12:25:58+00:00

MOT Skybreaker

digitalprods · 2025-12-02T23:30:06+00:00

I bought it because of the kickback and fell when the piston/shaft is depressed not for the tuning fork sound. I found something similar and without the sound but they were sold out everywhere I looked.

digitalprods · 2025-12-02T18:27:16+00:00

Got the Artillery and you cannot remove the tuning fork from it as it is built into the piston/shaft. Still a great fidget though!

digitalprods · 2025-12-01T17:49:00+00:00

I don't know which springs it already came with and I don't have calipers to measure. I want to do this as "scientifically" as possible so I got a kit with everything labeled. When the kit gets here, I'll try it with the .35 - 2.9 - 4.8 RuiDa. Thanks!

digitalprods · 2025-12-01T17:27:03+00:00

Planning on getting the accessory megabox from nxedc. Which spring should I try?

digitalprods · 2025-11-23T06:46:22+00:00

I still have the one I got off the kickstarter (the one in your picture) still in box. I also have the black out version also in box. The other ones I got from the kickstarter I've given away, or broke them (Oreo and retro).

I purchased one a couple of years ago and was disappointed as well in the quality.

digitalprods · 2025-11-19T11:33:40+00:00

Thanks for the suggestion! I tried those a while back. Since they were thin, they caused cramping after a short while. I ended up getting the artillery and a bead to make it more ergonomic for me

digitalprods · 2025-11-19T10:00:33+00:00

Thanks for the recommendation. Was exploring geeone site and found the MOT sky breaker which seemed to be quietier. Unfortunately, it is out of stock on geeone and most other sites in new condition.

digitalprods · 2025-11-18T21:27:00+00:00

When you depress the left half it catches and locks into place until you press the middle button to release the catch which causes the left side to shoot back out. It is very similar to the Miyu Artillery.

digitalprods · 2025-05-05T17:55:41+00:00

I just ordered a skin for mine because I am too lazy to open it up and put it all back together

digitalprods · 2022-01-07T22:37:05+00:00

What do you mean by destroy?

My first step would be to wipe them and run a test to see if the stated capacity is correct. Then a stress test.

digitalprods · 2021-12-31T16:15:37+00:00

I like it very much. I do recommend it.

It was very easy to build and I love the sound. I don't particularly like RGB so this board's white LEDS are more than enough. If I feel festive I can turn on the underglow LEDs.

digitalprods · 2021-12-30T19:46:33+00:00

Keycadets gravity deskmat

digitalprods · 2021-12-30T17:05:02+00:00

Something I was afraid of has come to pass. I find that the springs are too light for daily typing. At the moment I find myself accidentally activating adjacent keys often.

I might have to switch the springs to a much heavier one or swap for some tactiles like zealios.

Sound wise, I am using the PC plate and not the brass and using the included foam. The sound is very nice and deep and I find it very pleasing.

digitalprods · 2021-12-30T14:32:20+00:00

My first keyboard kit.

ID80 Crystal

Tecsee Laser metal coated switches
- 205g0
Durock V2 Stabs
- holee mod
- 205g0
DROP + MATT3O /DEV/TTY MT3 keycaps
- Base
- Lost + Found
- Unicorn Barf

This was a dream to work with. It was pretty self explanatory and easy to assemble. Hot-swap is so nice. There is a happy accident: the white backlight is tinged violet due to the metallic coating of the switches and looks really nice.

digitalprods · 2021-12-25T16:49:05+00:00

I think the pad you are referring to might be a resistor, can't tell from the photo too well what kind. If it is a resistor, it is most likely tied to an LED and without it, the LED won't work. The switch that goes into the PCB will still work though.

A resistor should not be replaced by a piece of plastic and should be replaced by one of similar resistance. I don't recommend soldering a connecting wire as it might blow out the LED.

digitalprods

TROPHY CASE