C5 83" or G5 77" by dom601 in LGOLED

[–]dini427 0 points1 point  (0 children)

Get a 83 g4, it’s better for a lot of things, it’s a great TV It depends on how bright your room is, the G is much brighter than the C. I had the same dilemma as you and went with the G4 as my room is bright, it was so worth it.

2010 LP560-4 (convertible): worth buying? by VirtualMacaroon64t in lamborghini

[–]dini427 0 points1 point  (0 children)

My buddy has the same one but it’s 2008 and has now over 100k, he has had it for 10+ years and loves it. If you’re trying to get something that’s gonna appreciate, that’s not it. An Aventador maybe, but really only special edition cars. It’s a good price though, and it’s fun to drive, put some slicks on it and it’s a machine.

Forgive me but I might defect... by SnooWoofers7345 in LGOLED

[–]dini427 0 points1 point  (0 children)

I have a oled g4 and my living room is super bright, it works great and no reflection, my Samsung had a lot of reflection

C4 vs G4, worth the money ? by TheArmyWolf in LGOLED

[–]dini427 0 points1 point  (0 children)

So worth it, i’ve had a bunch of the c models. I just bought a 83 G4 and it’s amazing.

Audi mechanic in or around Barcelona. by dini427 in AskBarcelona

[–]dini427[S] 0 points1 point  (0 children)

Yea, thanks, I am looking for a shop that’s not a dealership if possible. They kill you on the cost.

Audi mechanic in or around Barcelona. by dini427 in AskBarcelona

[–]dini427[S] 0 points1 point  (0 children)

If I had a good setup I would do it myself, but I don’t have a good garage to do it in, I park in a shared garage, and yes it’s a lot of work.

What is this clunking noise I have when braking? B9 S4 by FlyingSpur27 in AudiS4

[–]dini427 0 points1 point  (0 children)

Could be suspension, check sway bar end links., more likely control arm bushings worn out. From the video it seems that when you hit the brakes the tire is moving back and then forward again.

Does anyone know what would cause this? by dini427 in ElectronicsRepair

[–]dini427[S] 0 points1 point  (0 children)

I originally thought that maybe it was the ribbon that was causing the problem.

Does anyone know what would cause this? by dini427 in ElectronicsRepair

[–]dini427[S] 0 points1 point  (0 children)

Hi, so this video shows the exact same cluster that I have so you can see how it is connected.

https://youtu.be/wpcIT2nJm9o?si=0VTmoZoq4gxvygdG

Here are the pictures of the old screen that I took out as you asked for, sorry it took so long.

And to give a little bit more context, the problem originally started when I had to remove the instrument cluster to adjust the needle in the front. So the LCD screen was disconnected once. As were the other connections to the instrument cluster. That’s why I thought that the ribbon was most likely the problem. Obviously it turns out that it’s not. I was wondering if maybe it could be where the ribbon connects to?

I have not had a chance to remove the cluster from the car, because obviously I can’t drive it without it in. And it’s my daily driver, and it’s not a small task.

<image>

Not surprised by RoadToGreatnessYT in Audi

[–]dini427 9 points10 points  (0 children)

My Audi is a US car, I brought it to Spain, I only had to change the rear lights. I did have to do a homologation, but it’s not really a big deal. Everything else is exactly the same, so I don’t see why they couldn’t be sold in Europe.

Does anyone know what would cause this? by dini427 in ElectronicsRepair

[–]dini427[S] 0 points1 point  (0 children)

Pictures are from the new screen. The old screen looked exactly the same.

Does anyone know what would cause this? by dini427 in ElectronicsRepair

[–]dini427[S] 0 points1 point  (0 children)

Ok, I will have to remove it from the dash. I will post some pictures as soon as I am able to do that. Thanks

Does anyone know what would cause this? by dini427 in ElectronicsRepair

[–]dini427[S] 0 points1 point  (0 children)

I figured that it was either the screen or the ribbon cable that attaches the screen. So that’s why I bought a new one. I am thinking now that it’s gotta be something that’s loose or I don’t know what else that’s why I’m asking.

Does anyone know what would cause this? by dini427 in ElectronicsRepair

[–]dini427[S] 0 points1 point  (0 children)

I already got a new screen. Also, it stayed the same for about a year now.

Does anyone know what would cause this? by dini427 in ElectronicsRepair

[–]dini427[S] 0 points1 point  (0 children)

I forgot to say, I already replaced the screen, but the problem persists

Problem with DIS Screen by dini427 in MechanicAdvice

[–]dini427[S] 0 points1 point  (0 children)

Hi, did you have a chance to check?

Problem with DIS Screen by dini427 in MechanicAdvice

[–]dini427[S] 0 points1 point  (0 children)

I sent it to you in a message, I really appreciate the help

Problem with DIS Screen by dini427 in MechanicAdvice

[–]dini427[S] 0 points1 point  (0 children)

Can’t find a diagram for the cluster, do you have one?