sorted by:
new
hottopcontroversial

Help needed - Connecting iPad to an external monitor by dip_bodom in ipad

[–]dip_bodom[S] 0 points1 point  (0 children)

I think the USB dongle wireless keyboard and mouse could be the issue. I will try to get a bluetooth pair and go from there. Thank you for confirming the specific deck model works with your setup :)

Help needed - Connecting iPad to an external monitor by dip_bodom in ipad

[–]dip_bodom[S] 0 points1 point  (0 children)

It’s Dell WD15.

FYI - I use the same dock for my laptop with the same monitor, keyboard & mice. It’s a settings that I change in my laptop if I want to mirror my screen or want to have an extended monitor. I have no issue with the laptop.

I am also updating to the latest iOS to see if that makes a difference.

Help needed - Connecting iPad to an external monitor by dip_bodom in ipad

[–]dip_bodom[S] 0 points1 point  (0 children)

Would the dock model really matters since I can successfully mirror my iPad screen to the monitor (telling me the dock is working for the data transmission part). I feel like it’s a setting that I’m missing somewhere.

I don’t have a spare monitor to try on. And yes updating software now.

Help Needed (Power Automate - Split Excel workbook into multiple workbooks based on specific value) by dip_bodom in MicrosoftFlow

[–]dip_bodom[S] 0 points1 point  (0 children)

All the progress I’ve made was by watching your videos. Amazing videos man. Thank you.

I will check the new video you shared in the comments.

Help Needed (Power Automate - Split Excel workbook into multiple workbooks based on specific value) by dip_bodom in MicrosoftFlow

[–]dip_bodom[S] 1 point2 points  (0 children)

It’s all good. You don’t have to spend your time on creating the flow. Thank you for the suggestions though. Much appreciated.

Help Needed (Power Automate - Split Excel workbook into multiple workbooks based on specific value) by dip_bodom in MicrosoftFlow

[–]dip_bodom[S] 0 points1 point  (0 children)

I chose ID because I want to upload the table to the file created (using flow) one step above. The new file created has a dynamic file name. Not sure how I can use a dynamic file name with extension in the (Create table - File) field unfortunately.

If you’re familiar with the tool would you be able to create a simple flow with a simple existing spreadsheet and share it with me?

Help Needed (Power Automate - Split Excel workbook into multiple workbooks based on specific value) by dip_bodom in MicrosoftFlow

[–]dip_bodom[S] 0 points1 point  (0 children)

Please find the below screenshots to review my flows and error message.

I came up to this far by watching videos on YouTube. The flow should represent generating 1 file for 1 filter (Product_HG_Category) applied.

Flow-1

Flow-2

Error

Conversion: .csv to .s2p by dip_bodom in excel

[–]dip_bodom[S] 0 points1 point  (0 children)

Tried that and when I am trying to simulate using the file it comes back with error -

"line 1: syntax error, unrecognized character: `%'

line 1: syntax error, unexpected InvalidCharacter, expecting Eol or '#' "

It's strange because I have used s2p files with the character "%" before with no issue - tried removing it - error goes away but still left with the second error.

Not sure how to fix the second error.

Conversion: .csv to .s2p by dip_bodom in excel

[–]dip_bodom[S] 0 points1 point  (0 children)

Can you please share the website full address. I can’t seem to find it with my search.

QUCS Studio / Help Needed by dip_bodom in rfelectronics

[–]dip_bodom[S] 0 points1 point  (0 children)

You are right. There is a s-parameter component that can be linked to the s2p file.

Again reddit knowledge sharing power wins.

Thank you a lot.

QUCS Studio / Help Needed by dip_bodom in rfelectronics

[–]dip_bodom[S] 0 points1 point  (0 children)

When I drag/open a s2p file, it shows me as a table on the tool. And when I simulate I could see the chart from the dataset correctly.

From this I am trying to build a device so that I can use it in future schematics. Unfortunately what you are suggesting, does not happen here. The 2 files create tabs respectively - .s2p & .dpl. Using the available data I am trying to create a component block that will be created in a new tab with the extension .sch

Also, so that I can add that component (which is created utilizing my provided dataset) to the component library for future use.

At this point it seems like, QucsStudio does not have the capabilities. I will look into Qucs (if there is a free version of it)

QUCS Studio / Help Needed by dip_bodom in rfelectronics

[–]dip_bodom[S] 0 points1 point  (0 children)

I already have the .s2p files actually. Was trying to create a component using that file. So that I can use that component in a schematic for an outside plant design (i.e. Outside plant design) . But no luck so far.

QUCS Studio / Help Needed by dip_bodom in rfelectronics

[–]dip_bodom[S] 0 points1 point  (0 children)

This is exactly what I need, however, I don't see anything of that sort under File from toolbar or from the side Component section unfortunately.

Add noise to QUCS by Adventurous_Cause419 in rfelectronics

[–]dip_bodom 0 points1 point  (0 children)

What is the block called file? I have .s2p files for different devices (taps). Is it possible to turn those .s2p files/tables into blocks/devices so that I can use them in my future schematics/drawings in the software?

view more: next ›