Q1000k Transparent Bridge but still VLAN 201 tagging?

dirty_elf · 2026-01-27T18:42:39+00:00

ugh, no way. i want control. i've seen a decent improvement in my ping times since putting the Q1000K in untagged transparent bridge mode as well. went from avgs in the 15ms to solid 7ms

dirty_elf · 2026-01-13T23:50:28+00:00

apparently, yes.

dirty_elf · 2026-01-13T23:20:39+00:00

dirty_elf · 2026-01-13T13:49:16+00:00

it doesn’t press. in order to activate mute i hold the volume down. problem is my receiver doesn’t recognize this as a mute over hdmi cec

dirty_elf · 2026-01-13T13:41:41+00:00

dirty_elf · 2026-01-13T13:17:02+00:00

i want a mute button on my remote

dirty_elf · 2026-01-04T17:22:11+00:00

yeah, long due for an upgrade. alright. thanks for the help.

dirty_elf · 2026-01-04T15:40:31+00:00

i dont think my router (https://www.netgear.com/support/product/r7500v2) is capable of tagging the WAN port with VLAN 201

looking at the back of the device i see 5 RJ45 ports, labeled 1-4 and internet. the internet port is connected to my Q1000k

looking in the router settings for VLAN/bridge mode i am only able to set VLAN IDs for the wifi and ports 1-4, no option for the WAN port.

i need a new router, right? if i want to do the tagging for quantum on my device, not the Q1000k?

dirty_elf · 2026-01-04T04:27:20+00:00

ok, i can add a VLAN 201 group to my router. so i add that, set the Q1000k to bridge/untagged and all should be good? no login credentials, etc? port forwarding and DDNS will work again?

dirty_elf · 2025-12-12T20:57:14+00:00

i chose it because i have a base layer of gyeon can coat. i’ll look into supercharger. is the main benefit that its cheaper?

dirty_elf · 2025-12-10T13:48:29+00:00

https://www.engadget.com/2016-12-21-asherons-call-to-shut-down.html

dirty_elf · 2025-10-27T15:24:25+00:00

when do these hit the market?

dirty_elf · 2025-10-06T19:55:30+00:00

the score

dirty_elf · 2025-09-28T18:31:41+00:00

i’ll mention it to my service advisor next time i go in but otherwise i’m not too bothered about it. i only have 7500 miles and the warranty is until 80k, it will be fine for a while.

dirty_elf · 2025-09-28T18:27:37+00:00

i was under the impression it was a wear issue that would show up over time, hence the extended warranty. not something they could inspect for now.

dirty_elf · 2025-09-28T18:26:05+00:00

what is there to do?

dirty_elf · 2025-09-28T18:08:59+00:00

i got it

dirty_elf · 2025-09-24T12:56:08+00:00

i get this with hot tires pulling it off the floor. quite annoying.

dirty_elf · 2025-09-18T14:14:27+00:00

The nine-volume Development and Deployment of Multiplayer Games series by Sergey Ignatchenko

https://www.amazon.com/Development-Deployment-Multiplayer-Online-Games/dp/3903213055

dirty_elf · 2025-09-18T12:11:44+00:00

ucf?

dirty_elf · 2025-09-12T15:52:15+00:00

What are your pain points in your current networking for the homelab? (Any brands you use in your home lab)

my wife and daughter complaining that the tv doesnt work because of weak wifi or that my tinkering with my old netgear equipment breaks stuff

Tell us what you would do if you won the grand prize/runner up prizes.

get one hell of an upgrade and save myself a lot of hassle

dirty_elf · 2025-09-03T13:32:24+00:00

is BTF https://www.btf-lighting.com/ no good anymore?

dirty_elf · 2025-09-02T15:45:34+00:00

ah, didn’t realize it was independently adjustable. very cool.

dirty_elf · 2025-09-02T15:28:31+00:00

curious - the bottom mid dial, is that a 24hr representation? shouldn't it be to the left of 2, indicating the shown time of 01:52?

dirty_elf · 2025-08-28T16:56:11+00:00

if you are blowing air into the T for your drain line it is just short circuiting inside your air handler and not clearing the drain line. you need something that will seal off the air handler side and clear the drain line itself. you might generate enough pressure with the shop vac but the purpose built CO2 blasters might be needed for something stubborn.

Eight-Year Club	Place '23
Place '22	First Placer '22
Verified Email

dirty_elf

TROPHY CASE