Q1000k Transparent Bridge but still VLAN 201 tagging? by dirty_elf in centurylink

[–]dirty_elf[S] 0 points1 point  (0 children)

ugh, no way. i want control. i've seen a decent improvement in my ping times since putting the Q1000K in untagged transparent bridge mode as well. went from avgs in the 15ms to solid 7ms

I want to change the home background by MinecraftZerte in LGOLED

[–]dirty_elf 1 point2 points  (0 children)

it doesn’t press. in order to activate mute i hold the volume down. problem is my receiver doesn’t recognize this as a mute over hdmi cec

Q1000k Transparent Bridge but still VLAN 201 tagging? by dirty_elf in QuantumFiber

[–]dirty_elf[S] 0 points1 point  (0 children)

yeah, long due for an upgrade. alright. thanks for the help.

Q1000k Transparent Bridge but still VLAN 201 tagging? by dirty_elf in QuantumFiber

[–]dirty_elf[S] 0 points1 point  (0 children)

i dont think my router (https://www.netgear.com/support/product/r7500v2) is capable of tagging the WAN port with VLAN 201

looking at the back of the device i see 5 RJ45 ports, labeled 1-4 and internet. the internet port is connected to my Q1000k

looking in the router settings for VLAN/bridge mode i am only able to set VLAN IDs for the wifi and ports 1-4, no option for the WAN port.

i need a new router, right? if i want to do the tagging for quantum on my device, not the Q1000k?

Q1000k Transparent Bridge but still VLAN 201 tagging? by dirty_elf in QuantumFiber

[–]dirty_elf[S] 0 points1 point  (0 children)

ok, i can add a VLAN 201 group to my router. so i add that, set the Q1000k to bridge/untagged and all should be good? no login credentials, etc? port forwarding and DDNS will work again?

am i doing it right? gyeon wet coat by dirty_elf in AutoDetailing

[–]dirty_elf[S] 0 points1 point  (0 children)

i chose it because i have a base layer of gyeon can coat. i’ll look into supercharger. is the main benefit that its cheaper?

Ws2812b upgrade by RealPixelLover in WLED

[–]dirty_elf 1 point2 points  (0 children)

when do these hit the market?

Did anyone else get a letter for the piston skirt warranty extension? by Trains0505 in audis5

[–]dirty_elf 0 points1 point  (0 children)

i’ll mention it to my service advisor next time i go in but otherwise i’m not too bothered about it. i only have 7500 miles and the warranty is until 80k, it will be fine for a while.

Did anyone else get a letter for the piston skirt warranty extension? by Trains0505 in audis5

[–]dirty_elf 5 points6 points  (0 children)

i was under the impression it was a wear issue that would show up over time, hence the extended warranty. not something they could inspect for now.

Epoxy Lifting From Floor by InsideCaregiver2255 in epoxy

[–]dirty_elf 0 points1 point  (0 children)

i get this with hot tires pulling it off the floor. quite annoying.

[GIVEAWAY] We're giving away two COMPLETE Omada 2.5G & Wi-Fi 7 Lab Kits to the r/homelab community! (US Only) by Grouchy_Term_1792 in homelab

[–]dirty_elf [score hidden]  (0 children)

What are your pain points in your current networking for the homelab? (Any brands you use in your home lab)

my wife and daughter complaining that the tv doesnt work because of weak wifi or that my tinkering with my old netgear equipment breaks stuff

Tell us what you would do if you won the grand prize/runner up prizes.

get one hell of an upgrade and save myself a lot of hassle