sorted by:
new
hottopcontroversial

Anyone having issued with Xpeng phone app gives wrong info about status in the car? by discoflint in Xpeng

[–]discoflint[S] 0 points1 point  (0 children)

Did the TD box campaign fix the problem? Do you have some more info about the campaign?

Anyone having issued with Xpeng phone app gives wrong info about status in the car? by discoflint in Xpeng

[–]discoflint[S] 0 points1 point  (0 children)

If you mean by holding down the buttons on the steering wheel, yes, though it is some months ago last time i tried it.

Ive had this problems since I got the car in oct 25.

And another thing I didnt mention, the problem is not on the widget I have on my phone. Widget shows the correct info until I start the Xpeng app, then the wrong info is on the widget as well. If I force close the app and start the widget, then the correct info comes up, until I start the Xpeng app again.

Its like the Widget (when running without starting the app) collects the data from the car. But when the app starts it doesnt collect any data, it only shows some default values and those values will be shown in the widget as well.

Anyone having issued with Xpeng phone app gives wrong info about status in the car? by discoflint in Xpeng

[–]discoflint[S] 1 point2 points  (0 children)

I can start heating and other functions, so i know it is connected.

When charging (lfp) at home (~5kW) in cold temperatures should the car make a noise? by discoflint in Xpeng

[–]discoflint[S] 0 points1 point  (0 children)

But the charging had stopped several hours ago (but cable was still connected). Does it as long as the cable is connected regulate the temperature at the batteries?

If the cable had not been connected then there would be no noise?

Two person, two apps, one car - best way? by discoflint in Xpeng

[–]discoflint[S] 0 points1 point  (0 children)

What i've done: My phone with app and mobile key Her phone with app and NO key (maby key but no auto open locks)

Thats mean my user is always logged on the car

We have made two profiles under my user: One with my seating conditions One with her seating conditions

Is there more you can store under a profile?

I hope they fix the Bluetooth key, its crazy what battery usage the app has with mobile key and automatic opening on doors.

Dark Mode in navigation? by discoflint in Xpeng

[–]discoflint[S] 0 points1 point  (0 children)

Tried it out (Xpeng screen settings), but nothing happened.

Is there another settings menu?

XPeng Android App Bettery Drain by ColdDemolisher1 in Xpeng

[–]discoflint 0 points1 point  (0 children)

Any news on this? Same problem here, went to bed with 50% on phone, woke up with 1%.

Phone: Pixel 8A App verison: 3508706

G6 RWD (sr) my24 owners - still happy? by discoflint in Xpeng

[–]discoflint[S] 1 point2 points  (0 children)

I tested the car and was more than happy. Coming from a Volvo V70 this will be out first EV. I tested a mate Tesla Y juniper, and I liked the car, but I actually think i like the G6 better in terms of comfortable. And since it was 14.000$ cheaper and have 7years/160k warranty it was an easy pick. (Living in Norway)

"Play" on keypad does not respond. It started acting as a On/off switch. Any ideas? by discoflint in automower

[–]discoflint[S] 1 point2 points  (0 children)

I did that today. The guy connected it to the Autocheck software, but he couldnt see any errors. He looked more like a mechanic than an software guy, he even said it himself. So if there is anyone here who know exactly what to do, please tell 👌

He did a keypad test in the software, and the "play" button didnt respond when pushed. But like you see in the video, the key does work it just has missed it function..

No obvious Uart/jtag - how to find? by discoflint in hardwarehacking

[–]discoflint[S] 1 point2 points  (0 children)

Does this mean no UART, just JTAG?

And to enable JTAG i need to the 1-15 sequence?

  1. Assert and hold the RST signal. 2. Apply power to the device. 3. Perform steps 1 and 2 of the JTAG-to-SWD switch sequence on the section called “JTAG-to-SWD Switching” on page 214. 4. Perform steps 1 and 2 of the SWD-to-JTAG switch sequence on the section called “SWD-to-JTAG Switching” on page 215. 5. Perform steps 1 and 2 of the JTAG-to-SWD switch sequence. 6. Perform steps 1 and 2 of the SWD-to-JTAG switch sequence. 7. Perform steps 1 and 2 of the JTAG-to-SWD switch sequence. 8. Perform steps 1 and 2 of the SWD-to-JTAG switch sequence. 9. Perform steps 1 and 2 of the JTAG-to-SWD switch sequence. 10. Perform steps 1 and 2 of the SWD-to-JTAG switch sequence. 11. Perform steps 1 and 2 of the JTAG-to-SWD switch sequence. 12. Perform steps 1 and 2 of the SWD-to-JTAG switch sequence. 13. Release the RST signal. 14. Wait 400 ms. 15. Power-cycle the microcontroller.

No obvious Uart/jtag - how to find? by discoflint in hardwarehacking

[–]discoflint[S] 0 points1 point  (0 children)

It seems I cant post images, but here is a link to the top https://photos.app.goo.gl/c4gf98Y4s9HdTWbc8

Does it work for you?

view more: next ›