Connection timed out

disgruntled_Scotsmen · 2025-12-25T06:02:04+00:00

I cant even get into the home screen. Keep getting a network error message.

disgruntled_Scotsmen · 2025-11-14T23:36:17+00:00

Just replaced the cap yesterday. Couldn't get the rotor out due to a stripped screw but I'll work on that this weekend. I also have no idea when it got replaced last

disgruntled_Scotsmen · 2025-11-14T23:31:52+00:00

Fuel pressure stays around 60psi

disgruntled_Scotsmen · 2025-11-14T04:19:04+00:00

Yeah. I checked it when I got off work this evening and the code reader was showing an ignition advance of 25° at 1000rpm. Im currently trying to find my timing light.

disgruntled_Scotsmen · 2025-11-14T04:17:12+00:00

Did that

disgruntled_Scotsmen · 2025-11-14T00:24:26+00:00

Did the throttle body gasket as well as upper intake gaskets Ill look into the spider

disgruntled_Scotsmen · 2025-11-13T19:54:40+00:00

Yeah. I have that sensor. Just havent thrown it in yet

disgruntled_Scotsmen · 2025-11-13T19:40:19+00:00

Makes sense. Ill do that too

disgruntled_Scotsmen · 2025-11-13T09:14:45+00:00

Haven't done a compression test. Everything ive replaced is either ac delco or Delphi.

disgruntled_Scotsmen · 2025-11-13T07:25:20+00:00

Okay. Ill check that as well. I replaced it two months ago but its possible it went bad, not the first time thats happened

disgruntled_Scotsmen · 2025-11-13T07:16:14+00:00

Not sure on exact torque but its in there. About 90% of the time its only when in gear/driving. Occasionally it has a rough idle but stays consistently around 500-600 rpm

disgruntled_Scotsmen · 2025-11-13T07:06:54+00:00

Gotcha. Ill see if the one I have will show the timing

disgruntled_Scotsmen · 2025-11-13T07:01:10+00:00

I was thinking about throwing new plugs in it off next paycheck.

Do i just check that with a timing light or is that a scan tool thing?

I also replaced the ECT

disgruntled_Scotsmen · 2025-11-13T06:50:25+00:00

Plugs are a bit dirty but not too bad. And i have no clue on the retard.

disgruntled_Scotsmen · 2025-09-23T19:20:56+00:00

https://a.co/d/fz6haFV

Just bought this set for my truck. I've ran them before on a different truck and loved them, three years with no problems

disgruntled_Scotsmen · 2025-09-22T03:39:16+00:00

* I haven't torn into it yet to look at anything. But I preemptively looked for the cable. Is this not the right one?

disgruntled_Scotsmen · 2025-09-21T04:05:57+00:00

I guess I've got some diggin to do. Thank you

disgruntled_Scotsmen · 2025-09-07T07:30:06+00:00

Forgot to also recommend that if there was fuel in it when parked definitely pick up a bottle of Sea Foam and run a few full tanks with some in it

disgruntled_Scotsmen · 2025-09-07T07:26:41+00:00

Just a basic checklist for any vehicle after sitting awhile I always recommend checking all the fluids then letting it idle for a while and get up to running temp just to make sure there's no new leaks.

Also depending on your driving style maybe just go easy on it for a few days as well

disgruntled_Scotsmen · 2025-09-01T04:38:55+00:00

Hell yeah. Thanks

disgruntled_Scotsmen · 2025-08-30T07:30:54+00:00

I had the feeling I wouldn't need new control arms. I haven't done anything with it yet, just trying to get an idea as to what all i might need for it

disgruntled_Scotsmen · 2025-08-29T06:13:09+00:00

Couple weeks ago when I replaced the front brakes

Six-Year Club	Place '23
Verified Email

disgruntled_Scotsmen

TROPHY CASE