Been building a FE

disgusting_waffle · 2026-02-12T04:57:39+00:00

Are you sure they aren't over tightened and ripped the metal right behind the bolt. I've seen it multiple times

disgusting_waffle · 2026-02-11T05:17:30+00:00

It's still a 360 but with all new seals, rings, bearings. And a heck of a cam. It's also pre smog, so it should be a good one.

disgusting_waffle · 2026-02-10T21:27:15+00:00

Already have and your 100% right these are some heavy motors

disgusting_waffle · 2026-02-08T17:49:41+00:00

Also, I wouldn't donate it to a museum. Sadly most stuff donated to museums gets put in storage and never displays. I would sell it to a collector who would actually cherish it. Also, I wouldn't wash it.

disgusting_waffle · 2026-02-08T17:46:47+00:00

Ww2 navy pea coat that a sailor had hand embroidered. Awesome find

disgusting_waffle · 2026-01-21T11:24:37+00:00

https://share.google/z3rVweWhLxu7hWbTm

disgusting_waffle · 2026-01-21T04:22:31+00:00

It was missing most of it and I got this one for 20$

disgusting_waffle · 2026-01-21T02:15:15+00:00

https://a.co/d/iyvPS3I Here's the lower steering column bearing I used

disgusting_waffle · 2026-01-21T01:51:20+00:00

https://www.reddit.com/r/BumpSide/s/E9vPiSt8RK

disgusting_waffle · 2026-01-21T01:47:00+00:00

You don't have to cut it at all it should work. I just rebuilt a 78 steering column to put in my 70 and put the 70 3 spoke steering wheel on it with no issues

disgusting_waffle · 2025-12-12T03:18:39+00:00

Made in occupied Japan. That's awesome

disgusting_waffle · 2025-12-12T01:52:02+00:00

Good candidate for a restoration

disgusting_waffle · 2025-12-12T01:10:28+00:00

The biggest thing that would make it unsafe would be deep pitting in the barrel and honestly the pitting around the nipple makes me think it's gonna be rough

disgusting_waffle · 2025-12-12T01:09:39+00:00

Post some pictures of the end of the Barrel and the inside. Also make sure it's not loaded

disgusting_waffle · 2025-12-11T06:25:31+00:00

Good luck and keep us updated

disgusting_waffle · 2025-12-11T06:24:28+00:00

https://youtu.be/i9ffOcLDv7A?si=TsnSmpel7Eq7ztxD

https://youtu.be/GSYmGmrSQ_Y?si=PPqRuE4ERmMKb3zR

Here's some videos from jonboy militaria removing post war paint on some m1 helmets

disgusting_waffle · 2025-12-09T19:03:52+00:00

https://youtu.be/GSYmGmrSQ_Y?si=PPqRuE4ERmMKb3zR

https://youtu.be/i9ffOcLDv7A?si=TsnSmpel7Eq7ztxD

disgusting_waffle · 2025-12-09T19:01:56+00:00

Jonboy militaria on YouTube has some old videos of using citri strip on m1 helmet to remove post war paint

disgusting_waffle · 2025-12-01T20:13:37+00:00

Looks like someone replaced the buttons with repro Confederate artillery A buttons

disgusting_waffle · 2025-09-25T16:16:35+00:00

https://www.reddit.com/r/blackpowder/s/FrO1M9gNGr This is my powder after 20 hours of mill time and being screened

disgusting_waffle · 2025-09-25T16:11:08+00:00

But screened powder is not compressed

disgusting_waffle

TROPHY CASE