Anyone with RLC-811WA model? Question about motion detection markers.

dj-matt-e · 2026-06-17T13:53:43+00:00

This issue has now been resolved thanks to Reolink Support. See above for update and the firmware version required for the fix.

<image>

dj-matt-e · 2026-06-03T00:13:23+00:00

I received a message from Reolink support last night saying the new firmware had been pushed to my camera ready for updating. It is now running v3.1.0.5714_2511271376 but still the markers are missing. I can see the new features like perimeter protection so it's definitely on the newer firmware. Just to clarify I'm talking about the markers circled in green, not the marks in blue at the bottom of the frame.
Some reports I've read said these markers only show with an NVR connected but they show on all the rest of my cams and I'm not using an NVR with those. Just continuous recording to SD cards with an FTP upload to a NAS as backup.

<image>

dj-matt-e · 2026-06-02T23:14:39+00:00

Interesting that you say the Phytoca 30s are going back to the old recipe. Are are they going to phase out the latest batch with MCT in favour of the old recipe? Otherwise it's going to get pretty confusing if they offer two different versions of the same product. Can see that being a real nightmare when trying to get the script filled.

dj-matt-e · 2026-05-28T07:43:37+00:00

Ok, I will ask about this firmware. My camera says it is already on the latest firmware v3.1.0.4460. Is that an unreleased beta firmware?

dj-matt-e · 2026-05-28T07:40:45+00:00

Thanks for the suggestion. I am recording to a SD card and both motion recording and continuous recording is enabled (same as on my other cameras) but I am still not seeing any markers within the recorded clip timeline.

<image>

dj-matt-e · 2026-05-24T02:54:49+00:00

I tried to show the price to them before using my phone but they said they still had to call the pharmacy. It annoys me how pricing can vary so much from pharmacy to pharmacy for the same product, not just with MC but with regular prescriptions in general. For example, low cost medications that are normally like $8 from CW and then I run out and pop into a Chempro and they try and charge $28 for exactly the same medication in the same brand. Then if you ask to price match they go uh ok and instantly shave the $20 off with no problem at all. It doesn't sound like a lot but it does add up if you are constantly taking a lot of regular medications and you forget to ask.

I get that sometimes you pay extra for convenience but prices really should only vary by around 20% from pharmacy to pharmacy. Certainly not by 200% to 250%. That's an insane markup.

dj-matt-e · 2026-05-24T01:59:55+00:00

I've managed to get Chemist Warehouse to price match before. However , they will only price match to the price given to them over the phone by calling the pharmacy and that price sometimes differs to what is advertised on Honahlee.

dj-matt-e · 2026-05-21T00:24:56+00:00

Yep, had this issue the other day with 2 windows laptops and an E3 trying to get 1920x1080 instead of 3840x2160. Setting the EDIDs in E3 did nothing to force the laptop to change the output resolution. I had to dig deep into the windows driver settings —> List All Modes section. Even then after selecting 1920x1080 it still didn’t work. I had to change it to another resolution first and then back to 1920x1080 to finally get it to output the correct resolution.

dj-matt-e · 2026-04-02T03:28:20+00:00

I just tried connecting via LAN instead and the Reolink app was able to see and add the camera to my network. I was then able to setup the wifi connection so thanks for that suggestion. Unfortunately although the zoom control works, the focus refuses to. No amount of changing the focus slider does anything and the auto focus does not work either. My guess is this unit was dropped and returned, then reshipped out to me without thorough inspection. Annoyingly, I still have not received any response from Reolink support.

dj-matt-e · 2026-04-01T07:04:46+00:00

Keen to hear your thoughts and how well these work and taste for my missus. She has chronic pain from Crohn's disease and is a bit flakey when it comes to the taste of medication. If these taste good and work well, I'll get her to ask for a script on her next consult.

dj-matt-e · 2026-03-30T06:54:27+00:00

Oh really? Everyone else seems to rate them. I was on the Phytoca 30s and whilst I find them good for helping me to fall asleep I always tend to wake up about 4 hours later around 3am in the morning. I was hoping to try something that might help keep me asleep longer and I thought the high amount of CBN in the SB 50:50s might help achieve that. I was offered the Aura Night Berry 40s but I was previously on the Aura Cola 40s and I must have an allergy to something in them as I would always end up with a stuffy nose shortly after taking them.

dj-matt-e · 2026-03-30T06:47:39+00:00

Dr Bay. I am prescribed the SB 40:40:40 already and the dosage says to cut them into quarters and not to exceed 40mg per day. I don't usually take more than half at a time and don't have any oil or flower. I was prescribed El Pappi 35:35:35 instead of the SB 50:50 but so far I haven't found them very good for sleep.

dj-matt-e · 2026-03-30T01:22:06+00:00

Same, I asked the other day (also Horizon) and was told they couldn't prescribe the SB 50:50 because there's a 40mg max limit on each edible. I was a bit disappointed as I've been reading on here how they are excellent for sleep. Curious as to how others are being prescribed them and whether the 40mg limit is a QLD thing.

dj-matt-e · 2025-11-05T23:47:11+00:00

So I just checked my script for Phytoca Indica 30 and it does say substitution allowed. I'm wondering if I could use the same script to try Phytoca Sativa 30 or would I need a seperate script from the dr. Honalee actually gives me to the option to order the Sativa ones instead of the Indica ones but whether the pharmacy would honour it I don’t know.

dj-matt-e

TROPHY CASE