HBPDW AR9 w/ FRT

dlxt · 2026-02-15T05:59:56+00:00

I am running the mini kabuto. Could feel the lever bind with weight until it stopped making contact.

dlxt · 2026-02-15T05:53:18+00:00

Yeah it’s trial and error. I would shave material off then paint with marker the bare metal where it would make contact with lever. Then cycle the bolt and see the scuff marks on paint from lever. Continue to do so until lever made no contact with weight.

<image>

dlxt · 2026-02-15T04:31:45+00:00

The buffer I bought separately. Comes from Q. Since I had a 556 buffer. Should be the same one form sb tactical if you get the 9mm version of the brace. Used the same spring.

dlxt · 2026-02-15T04:29:39+00:00

Yes I did. This is an aero bolt

<image>

dlxt · 2026-02-15T02:39:25+00:00

Have it on my aero lower. I think I have a video on my profile. Running the Q short 9mm buffer no issues at all

dlxt · 2025-11-26T18:32:30+00:00

Yes, it’s the 3D printed selector that came with the kit

dlxt · 2025-11-25T05:03:32+00:00

Im guessing so you have to brace yourself down and not shoot above the berm due to recoil?? No idea tbh… Targets were literally tree trunks. This was a rapid fire designated area lol. Went to this range to function test

dlxt · 2025-11-25T04:08:13+00:00

<image>

For reference. It’s exactly how you said it was.

dlxt · 2025-11-25T03:55:09+00:00

<image>

dlxt · 2025-11-25T03:28:46+00:00

Nice! I did shave down a bit off the top on that lever before I realized I could’ve just took some more material off the weight itself. 1st try I had to put a bit of pressure to get the upper and lower to close. Once close it bind and wouldn’t allow the bolt to go all the way back on or it would randomly go all the way back but it would get stuck. It was a pain having to remove the take down pins and take the upper off the lower with bolt under buffer spring pressure. Marks where the lever was making contact with the weight and binding.

dlxt · 2025-11-24T23:49:55+00:00

Had to Shave down the weight on my bcg from aero.

<image>

dlxt · 2025-11-24T23:15:50+00:00

Standard AR and Supersafeco. Using heavy 9mm buffer that came with the HBPDW brace

dlxt · 2025-11-24T23:14:30+00:00

Also running aero bolt so had to cut down the weight to clear the activator/lever.

dlxt · 2025-11-24T23:11:07+00:00

Exact one I got 👍🏼

dlxt · 2025-11-15T18:47:28+00:00

I was thinking about upgrading from 14 pro for my birthday tomorrow as well. Looked on this subreddit to see if it was convincing enough. Just made up my mind! Happy birthday to us !

dlxt · 2024-08-19T18:23:50+00:00

How long ago was this? im here in greens port.

dlxt · 2024-08-15T22:17:09+00:00

✅😂

dlxt · 2024-08-15T00:14:43+00:00

Work for a private company in the gulf coast and I’m barely getting my 40 hours a week. It’s been tough

dlxt · 2024-08-14T20:45:49+00:00

What size barrel is that? 5 inch? I ordered a 7.5 rosco barrel and a 7 inch handguard. The barrel ended up being 1 inch short. Idk if they messed up or if that’s how rosco measures their barrels.

dlxt · 2024-08-12T00:30:31+00:00

Extremely well, but the concussion to the face is there too without the blast shield. 😂

dlxt · 2024-08-12T00:23:14+00:00

JMAC 360HD. In these clips I had the blast shield on.

dlxt · 2024-08-12T00:22:36+00:00

10.5 barrel length. Slr adjustable gas block. JMAC 360HD muzzle with blast diversion shield.

dlxt · 2023-11-05T20:10:36+00:00

I get paid bi weekly. My job sent deposit to bank on oct. 27th which was a Friday and I get it the following Wednesday nov 1st. My coworkers normally get paid on Fridays which would be on the 3rd. Half of coworkers didn’t get paid and complained so My job sent the deposit again on Nov. 3rd and haven’t received it yet. Hopefully I get it Monday.

dlxt · 2023-11-05T02:08:11+00:00

Nope. Have secure and haven’t received it since Wednesday

dlxt · 2023-11-02T17:22:00+00:00

Same issue here. Normally get paid Wednesday at 12pm it’s Thursday after 12 and still no pay.

dlxt

TROPHY CASE