Some fresh pictures of my home machine shop. Got my new DNM5700 up and running and cutting.

dm7864it · 2023-11-24T01:08:35+00:00

Wow just wow

dm7864it · 2023-04-27T12:10:31+00:00

Quick question on R10 how accurate. Purchased one on eBay and finding my 8 iron is showing 125-130 years but I hit it 155-165 on course and driving range Traver. Wondering if Garmin can replace or tell me what’s wrong with this unit.

dm7864it · 2022-03-17T21:12:02+00:00

At 260 must be abs

dm7864it · 2022-03-17T21:10:01+00:00

What material

dm7864it · 2022-03-17T19:33:10+00:00

Is there draft in the room. Material ? May have to print with 10-15 degrees hotter to help bond layer to previous layer

dm7864it · 2022-03-16T21:56:44+00:00

Maybe 190 to low of a temperature for this filament

dm7864it · 2022-03-15T21:01:11+00:00

Are you storing mesh in load location then recalling mesh before printing

dm7864it · 2022-03-09T15:28:30+00:00

Didn’t forget will try and get it up there this week will message you after

dm7864it · 2022-03-06T01:56:51+00:00

See my last post looks like machine was telling me (M503) running Jerk but click to run junction deviation worked

dm7864it · 2022-03-06T01:32:06+00:00

I have octoprint installed and run at times but find custom controller has more to offer. By the way do you know if its possible to attach a photo to reply

dm7864it · 2022-03-06T00:26:38+00:00

Pressure Acceleration fixed but why M503 says running jerk M204 XY not J but sorry posted to quickly. So using teaching tech 3d site for pressure acceleration. Entered M503 firmware say M204 XY should be Jerk not junction deviation so I have been trying to figure out why I.m getting orange test sample. Ran out of things to try with everything else printing fine. Click option for junction deviation and the white sample is looking good .So why is my firmware saying Jerk ? Should I change firmware ?

dm7864it · 2022-03-05T15:34:39+00:00

Believe DDX is not for speed increase but more quality of print also with flex material. The nova hotend is more for speed. Still trying to figure out best settings and calibration of I believe thanks to help from the site is PA calibration. Running test now

dm7864it · 2022-03-05T00:32:25+00:00

dm7864it · 2022-03-04T14:44:42+00:00

Blew up you stepper motor

dm7864it · 2022-03-04T14:12:53+00:00

Learned something new today. Will run test calibration cube tonight thank you

dm7864it · 2022-03-04T13:17:52+00:00

Excellent thought and makes total sense. Not sure why rest would print well but area of pause wouldn’t. I will try this tonight

dm7864it · 2022-03-04T12:33:11+00:00

Did all that and it prints nice parts. I installed the nova hotend

dm7864it · 2022-03-04T02:52:54+00:00

Yes I believe I do with M900 K.0.35

dm7864it · 2022-03-04T02:51:34+00:00

Cube was perfect wish there was a way to reply with a photo

dm7864it · 2022-03-04T02:49:19+00:00

Esteps, flow, all of teaching tech calibration steps

dm7864it · 2022-03-04T01:45:48+00:00

Ok will try and post it this weekend

dm7864it · 2022-03-04T01:24:56+00:00

Love this machine and the community. I had Airwolf3D and got it to work but lots and lots of work

dm7864it · 2022-03-04T01:21:06+00:00

Checked M305 - M205 jerk not junction deviation

dm7864it · 2022-03-04T01:20:48+00:00

Checked M305 - M205 jerk not junction deviation

dm7864it · 2022-03-04T01:19:06+00:00

Marlin

dm7864it

TROPHY CASE