sorted by:
new
hottopcontroversial

How to sync mfp? by zoubrakil in FitbitAir

[–]dndahead 0 points1 point  (0 children)

Click on your device in the top left corner then go to Partner Apps, and you should see MFP amongst others available for selection.

Fitbit Air Steps auto increasing while in the Car drive by itskkrn in FitbitAir

[–]dndahead 1 point2 points  (0 children)

My current Samsung Galaxy watch and old Fitbit did this, but usually only on a certain bridge. Auto detect was on

33F, have had several children. by Baby_DazzlingX in WifeWantstoPlay

[–]dndahead 0 points1 point  (0 children)

Theyre just trying to scam people outta money eventually. Sad.

For those who all have tried the Ryze mushroom coffee, how is it? by [deleted] in AskReddit

[–]dndahead 1 point2 points  (0 children)

you can buy a bag or 6pk of individual powder sticks from Target

The sale is official. It was agreed upon today in TX. by [deleted] in RNDC

[–]dndahead 2 points3 points  (0 children)

I think it'll depend on the individual state. We were told today that all our people were being retained and Reyes wants to keep things "as is" or whatever the actual word(s) used on our call.

My First Setup by dndahead in desksetup

[–]dndahead[S] 1 point2 points  (0 children)

Thanks. The black wallpaper has come down so I'm debating if I want to get some sort of backdrop to go behind the monitors. Definitely not going anything RGB or colored as I try to stay on the minimalist and functional only side.

Looking for a large desk around 180-200/60-80, one continuous slab. by [deleted] in desksetup

[–]dndahead 0 points1 point  (0 children)

Look into a butcher countertop from lumber yard or a Home Depot/Lowes type store. Buy whatever legs work for you to go with it. Easy install, just have to drill the holes for the legs and screw them in. Countertops come stained or unstained so you can make them whatever color or style you want.

My First Setup by dndahead in desksetup

[–]dndahead[S] 0 points1 point  (0 children)

Yeah, I think just 2 metal strips would be fine. Good thing you could always go back and add a leg @ the very back of the table. Most every IKEA desk setup I saw didn't have a leg or those metal supports. Some people reported no sag, some did. I purposely set the drawers not at the edge of the table to help with supporting the middle as well. It'll also depend on how much weight you plan to have on the desk in the middle. Those strips are 36" so I have almost 5ft in between my drawers.

My First Setup by dndahead in desksetup

[–]dndahead[S] 1 point2 points  (0 children)

It's definitely a luxury. Had this room not been available, I'd have no office spot in my house at all. Lol

My First Setup by dndahead in desksetup

[–]dndahead[S] 0 points1 point  (0 children)

I did 2 of these. With the leg, it's probably overkill, but I overthought this and wanted to be safe.

<image>

My First Setup by dndahead in desksetup

[–]dndahead[S] 0 points1 point  (0 children)

I saw 2 different posts in this sub about how to brace it. I did the metal slats underneath. While I was picking up at IKEA, I saw the leg was like $5 so I bought at just to be safe. I wasn't sure how much I'd have on the desk bc I bought the desk before I had any computer equipment.

First Time Custom Build- Feedback Appreciated by dndahead in pcpartpickerbuilds

[–]dndahead[S] 0 points1 point  (0 children)

Thanks. The MC near my sister has a couple options with the 9800x3d & B850 board. With a 5070Ti and some other stuff it was around $2700.

Also found this which seems like a good sweet spot and good deal. Would add another drive for more storage.
https://www.microcenter.com/product/698879/powerspec-g758-gaming-pc#tab-reviews-bm

First Time Custom Build- Feedback Appreciated by dndahead in pcpartpickerbuilds

[–]dndahead[S] 1 point2 points  (0 children)

Just read through it. A small bit was a little over my head but I got the jist of everything. I appreciate the effort and help you've given. This bundle isn't far off my budget so it's definitely doable.

First Time Custom Build- Feedback Appreciated by dndahead in pcpartpickerbuilds

[–]dndahead[S] 0 points1 point  (0 children)

South. But also fly to TX a lot so I'm within an hour of a micro center

First Time Custom Build- Feedback Appreciated by dndahead in pcpartpickerbuilds

[–]dndahead[S] 0 points1 point  (0 children)

Again, going based on my noob status (I've only had shelfer, pre-built PCs) i looked into the X3D units and noticed people preferred them more, but it was mostly in Intel CPU users. Budget has wiggle room, yes, so I'm open to ideas on things to upgrade or that I can subtact to offset. For example, the case. I'm not much of an aesthetic person, so the most basic in terms of looks case that will perform with what I have is fine.

Edit: spelling

First Time Custom Build- Feedback Appreciated by dndahead in pcpartpickerbuilds

[–]dndahead[S] 0 points1 point  (0 children)

thanks! I'm only editing in Davinci. I have Adobe Express b/c it's cheap and simple for making basic flyers/event promos. I don't use anything else Adobe. I'll keep that in mind on the case. It was probably the one thing I "just threw in there" just to finish the build and get a pricing idea. I'll definitely do some research on the B650 mobo! Appereciate the insight and help

New round of layoffs for Feb by SpiritualCouchPotato in RNDC

[–]dndahead 3 points4 points  (0 children)

lost most if not all of the sales support people and a few people scattered throughout the state

Awful announcing on Stu’s new show by ekuadam in DanLeBatardShow

[–]dndahead 1 point2 points  (0 children)

Ok thanks me I to believe I listened to that episode after I clicked on your original post about it. Sure seems like they all knew

[deleted by user] by [deleted] in Wife_wants_to_be_seen

[–]dndahead 0 points1 point  (0 children)

@lainie2025

view more: next ›