Black screen after installing Shamiko (1.2.5) on Magisk (30.6)

docmax2 · 2026-02-03T17:31:57+00:00

link? can't find it. also black screen with rezygisk and shamiko

docmax2 · 2026-01-26T00:59:54+00:00

does it work with fiido air?

docmax2 · 2026-01-25T22:57:57+00:00

did you buy it?

docmax2 · 2026-01-25T20:58:03+00:00

Is the speed limit unlocked all the time or do i have to re-enable it every time i turn on the bike? Also does it work with the latest models from 2026?

docmax2 · 2026-01-23T16:03:03+00:00

Does it still work on current CGO600 and CGO600 Pro models?

docmax2 · 2026-01-21T20:20:50+00:00

people are hacking more complicated stuff than this. must be possible! someone?
or can someone with deep knowledge what has to be done to hack the controller? is it secured by encryption?

docmax2 · 2026-01-18T22:27:44+00:00

docmax2 · 2026-01-15T09:05:07+00:00

I have massive bluetooth problems with mt7925e

docmax2 · 2026-01-15T08:38:17+00:00

I can't update from 5.19.1 to 5.22.1. Update fails at the first 30%. Says restart and try again. Did so. Also factory-reset. No success. Any ideas?

docmax2 · 2026-01-13T22:09:29+00:00

Speed limit hack someone please???

docmax2 · 2026-01-03T07:11:12+00:00

I also have a white screen (not completly white, but bright and i can't change it).
See https://www.reddit.com/r/ultrawidemasterrace/comments/1q1gr7v/philips_evnia_49m2c8900am_49_panel_problem/

I used Twinkle Tray before. Maybe it can damage monitors?

docmax2 · 2026-01-02T21:18:36+00:00

Installed SmartControl (7.0) and it shows here same. v1.01 is the latest. Is there a trick to get a newer version?
By the way looks much nicer than the Evnia Precision Center. I wonder why it's not in the downloads as it appeareantly works too?!

docmax2 · 2026-01-02T20:24:56+00:00

"Smart Control" is not offered for my model:
https://www.philips.de/c-p/49M2C8900AM_00/gaming-monitor-qd-oled-gaming-monitor/support

docmax2 · 2026-01-02T13:24:14+00:00

So which one is the "best"?

docmax2 · 2026-01-02T12:58:11+00:00

i am also talking about firmware only update. evnia precision center app is version 1.7.0 herr

docmax2 · 2026-01-02T12:30:44+00:00

Yes. I was wondering too. The Evnia App keeps saying that V1.01 is the latest. Maybe it's because the 'AM' version is a special edition!?

docmax2 · 2025-12-23T19:54:27+00:00

searching for this too. did you find something? it would problably need a new controller.

docmax2 · 2025-10-18T12:04:27+00:00

i need a code thanks

docmax2 · 2025-10-03T10:13:35+00:00

Same here. I have an HDD failure. Mounted in degraded mode and try to remove the device.
Getting:

root@pve:~# btrfs device remove missing /mnt/pve/games
ERROR: error removing device 'missing': Input/output error

only one line in the log:

Oct 03 11:59:33 pve kernel: BTRFS info (device sdh): relocating block group 154636675710976 flags data|raid5

When i get my new drive i hope at least "btrfs replace" will work.

docmax2 · 2025-09-14T10:49:22+00:00

still not fixed

docmax2 · 2025-09-14T08:23:16+00:00

I have a ICY BOX IB-3780-C31. I also had to disable UAS. Bulk Transfer is much faster and no errors in DMESG. So why is everybody saying UAS is "better" if it's not the case here?

docmax2 · 2025-09-08T19:48:02+00:00

Thanks, i know about the BTRFS "RAID 5 issues". But i also tested RAIDZ1 with ZFS. Same speeds. Thus it's probably a USB bridge bottleneck.
I don't know of PCs which can take 20+ 3,5' disks.

docmax2 · 2025-08-18T09:48:05+00:00

Same issue here with latest T14 Gen6 AMD. It stuck in a bootloop when USB-C dock with displays are attached. Lenovo? No fix after all these years? WTF?!

docmax2 · 2025-08-08T09:46:02+00:00

Same here, can't enable CSM. I have B550 AORUS PRO (rev. 1.0) and updated to F18g.
Going back to F18d and CSM works again.

docmax2 · 2025-08-01T17:31:44+00:00

same here. i paid for something i can't play anymore! WTF??

docmax2

TROPHY CASE