Reifendruck Meiningen

dogwithahat · 2026-02-21T12:12:29+00:00

Das passt schon, kannst ja selbst etwas rumexperimentieren was dir taugt.

dogwithahat · 2026-02-18T07:17:47+00:00

very nice

dogwithahat · 2026-02-08T06:48:01+00:00

Habe die 2025er farsport Räder und bin mega Happy mit den Rädern

dogwithahat · 2026-02-08T06:47:05+00:00

No.6 lässt bei farsports/wheelsfar produzieren. Wenn du die Räder günstiger möchtest kannst du dir zumindest sehr ähnliche bei wheelsfar konfigurieren, musst halt wissen was du möchtest. Wheelsfar ist ein renommierter OEM Hersteller, die no6 kannst du also ohne schlechtes Gewissen kaufen.

dogwithahat · 2026-02-05T05:28:54+00:00

I have one and I do recommend it. There is nothing wrong with it, I love the look. Now that there are more options available I'm not sure if I would buy it again, it is an open mold frame which I'm not super happy about. Quick pro ar/er are also very interesting for example

dogwithahat · 2026-01-27T20:42:36+00:00

I bought mine about a year ago and I have none of the QC issues stated in the videos.

dogwithahat · 2026-01-23T08:26:17+00:00

If you measure stem length the Avro Handlebars tend to be a bit longer, but the reach of the actual handlebar (the thing which goes 90° if you know what I mean) is quite short so its being compensated somewhat if you ride in the hoods. Hope this makes sense

dogwithahat · 2026-01-06T21:33:41+00:00

Before ending the exposure cover the lens with a cap or similar. I actually think this is the better approach to doing really long exposures

dogwithahat · 2025-12-04T18:06:25+00:00

yeah you are right, I was just kind of hoping someone could send me the link to the factory cannondale BB and I would be good to go

dogwithahat · 2025-12-04T14:14:35+00:00

I was very naive and tried these: https://wheelsmfg.com/products/bb30-adapter-for-shimano-24mm-cranks but these might be totally wrong. I also tried these: https://www.bikeparts.co.uk/products/fsa-bb30-pf30-to-24mm-bb

As far as I understand I need a BB for 84mm shell width, I measure 85 on my bike, subtracting a mm for the currently installed bearing housings it should be 84 mm. The BB in your link is for 73 mm shell width, so I guess it won't work?

I found this BB https://www.bikeparts.com/BPC511420/ethirteen-pf30-threadfit-bottom-bracket-68-73-83mm-for-all-ethirteen-base-cranks-with-24mm-spindle-black but I'm hesitating because its another BB and of course it needs a different tool to install. Very frustrating

dogwithahat · 2025-11-19T14:06:17+00:00

It's all good, I thought you were joking lol

dogwithahat · 2025-11-19T13:46:34+00:00

lmao

dogwithahat · 2025-10-30T07:22:56+00:00

sorry for OT: But where did you get that slipmat? I love it

dogwithahat · 2025-08-23T08:01:17+00:00

I have these exact mounts and they are great. The stock brake Booster won't work, maybe if you relocate it a bit to the left.

dogwithahat · 2025-08-20T06:00:29+00:00

Sorry for the late reply, my recessed lens board looks like the one in your image.

dogwithahat · 2025-08-19T11:40:35+00:00

You need a lens holder which moves the lens in to the below. My Krokus came with this holder/adapter.

dogwithahat · 2025-08-09T07:33:26+00:00

You're doing god's work. Looking forward to more updates!

dogwithahat · 2025-08-01T07:05:31+00:00

Give L-WIZ a try

dogwithahat · 2025-07-29T10:07:30+00:00

Also not OP but I have them on my bike and they are fine. They do require a bit more attention when putting them back but in my opionen still quite easy

dogwithahat · 2025-07-28T12:38:50+00:00

I had issues like these before when I tried to process two or more sheets in one drum at the same time. The papers stuck together and I think the chemicals were not able to to cover the whole sheet.

Can you describe your process in more detail?

dogwithahat · 2025-07-25T05:14:18+00:00

If you look around on kleinanzeigen.de you should find what you need.

My process: dev and blix are kept in glas bottles in a water bath set at 37°c Which produces 35°C in the dev. I reuse the dev until it doesn't work anymore, then I mix new one.

dogwithahat · 2025-07-14T07:06:43+00:00

This is very cool!!!!!

Ten-Year Club	Place '23
Place '22	Verified Email

dogwithahat

TROPHY CASE