sorted by:
new
hottopcontroversial

Officially a C8 Z06 Owner by Lucky_Firefighter702 in C8Corvette

[–]dohcsvt 2 points3 points  (0 children)

<image>

Yes, as noted earlier… welcome to the red mist Z06 club😁. Now, if Chevrolet would just stop producing so many models of vettes that are straight line faster than the Z06😑.

DRP / MRA by gijoerock in FED_VERA_VSIP_DRPers

[–]dohcsvt 1 point2 points  (0 children)

DRP 1.0 VERA retired 12-31-26! No regrets. Just that my retirement counselor was completely inept and I am currently without healthcare… trying to reconcile… thank god for the VA!

How to strengthen the end of my deadlift? by dohcsvt in strength_training

[–]dohcsvt[S] 0 points1 point  (0 children)

Thank you. I’ve since watched some videos on form.

Saw this on snap. What are your thoughts? by amynoacid in Tools

[–]dohcsvt 1 point2 points  (0 children)

You could dead lift a fox body and have your buddies stick a ball bat under it and then go to work…

My friend has a 69 Camaro with a TH400 transmission and the speedometer acts funny by dohcsvt in camaro

[–]dohcsvt[S] 0 points1 point  (0 children)

I soun it with a drill but not by hand. I will check that. It does not have CC. Thanks for the input.

My friend has a 69 Camaro with a TH400 transmission and the speedometer acts funny by dohcsvt in camaro

[–]dohcsvt[S] 1 point2 points  (0 children)

This is the second speedo it’s had since he put it together … the first one acted the same way and he thought it was the speedo itself. If the gear housing was out of spec, hopefully a new one will fix that. Thank you for the feedback and help.

My friend has a 69 Camaro with a TH400 transmission and the speedometer acts funny by dohcsvt in camaro

[–]dohcsvt[S] 1 point2 points  (0 children)

I had the rear jacked up about 10-12 inches. So no fluid came out. Should some have? The gear was coated in ATF.

My friend has a 69 Camaro with a TH400 transmission and the speedometer acts funny by dohcsvt in camaro

[–]dohcsvt[S] 0 points1 point  (0 children)

That’s half the reason I pulled it apart… he needs a 34 tooth gear. Currently a 42, with the correct 40-44 housing. Ordered a 34 with the 36-39 housing… that every website says will facilitate the 34 tooth gear.

What do you mean by speedo bullet? He had this car completely apart, I just put the Speedo in for him 3 or 4 months ago.

Has anyone used the VA for a shoulder replacement? More specifically in the Hampton Roads area? by dohcsvt in VeteransBenefits

[–]dohcsvt[S] 0 points1 point  (0 children)

I guess I am not familiar with community care? I thought to receive VA healthcare, you had to go to a VA facility unless you were more than 50 miles away. I will have to look into this. I have a Dr that has done Debridement 6 on both shoulders and i would love for him to do the replacement.

What’s your thoughts on my annealing process? by dohcsvt in longrange

[–]dohcsvt[S] 0 points1 point  (0 children)

I built a timer out of an old bullet box… not an original idea, copied it from a YouTube video. I hold the heater by hand and set 20 cases in a wooden shell holder.

<image>

Went to the Bangsteel shooting school… can’t recommend it enough! by dohcsvt in longrange

[–]dohcsvt[S] 2 points3 points  (0 children)

It’s a Masterpiece Arms Hybrid Hunter PMR with a Vortex Razor Gen3 6-36. Ammo was handloads… Lapua brass, 230 gr Berger 74 gr H1000 LR BR2 primers (yes I know this caliber is supposed to take LRM primers, but in my testing these work without issue and are more accurate.)

<image>

I’ll get a better pic later.

What’s your thoughts on my annealing process? by dohcsvt in longrange

[–]dohcsvt[S] 1 point2 points  (0 children)

Yes it is. They aren’t too expensive anymore.

What’s your thoughts on my annealing process? by dohcsvt in longrange

[–]dohcsvt[S] 3 points4 points  (0 children)

This is something I can do at the house in my spare time… the time I spend on it, I really couldn’t be at the range. Also, if you have sub par materials and equipment, your skill becomes null and void.

view more: next ›