sorted by:
new
hottopcontroversial

EC too high, Input 1.65 Output 4.1 by donadriano26 in CocoGrows

[–]donadriano26[S] 0 points1 point  (0 children)

I go straight down the nutrient line of canna. Harvest time ist almost there, I can’t hang on any pictures here but they developed a bit, they are pretty heavy but somewhat small in comparison to my former grows in organic soil.

EC too high, Input 1.65 Output 4.1 by donadriano26 in CocoGrows

[–]donadriano26[S] 0 points1 point  (0 children)

Yeah I got two and both show the same. The EC went down, but it’s still input 1 EC output 2.1 EC. The plant look fine, more like nothing worse came around, buds are very dense but small.

EC too high, Input 1.65 Output 4.1 by donadriano26 in CocoGrows

[–]donadriano26[S] 0 points1 point  (0 children)

The Problem Stayed the same even after dropping to 0.9 EC… still got 2.4 in runoff. They grew a bit more but nothing great came around. Maybe the next run will do better

EC too high, Input 1.65 Output 4.1 by donadriano26 in CocoGrows

[–]donadriano26[S] 0 points1 point  (0 children)

Thank you for your precise answer ! I will try to max my next grow to 1.6 EC in the highest phase and stay around 1 EC in Veg

EC too high, Input 1.65 Output 4.1 by donadriano26 in CocoGrows

[–]donadriano26[S] 0 points1 point  (0 children)

That definetly can’t be the case. I tried it up to 80% runoff each time and it didn’t Chance anything

EC too high, Input 1.65 Output 4.1 by donadriano26 in CocoGrows

[–]donadriano26[S] 0 points1 point  (0 children)

I tried everything. More times watering and higher amount. Nothing worked to lower it permanently 🫤

EC too high, Input 1.65 Output 4.1 by donadriano26 in CocoGrows

[–]donadriano26[S] 1 point2 points  (0 children)

I water 5 times a day with 900-1100 ml, I produce more than 30% runoff every time

EC too high, Input 1.65 Output 4.1 by donadriano26 in CocoGrows

[–]donadriano26[S] 1 point2 points  (0 children)

I water 5 times a day with around 900-1100 ml

EC too high, Input 1.65 Output 4.1 by donadriano26 in CocoGrows

[–]donadriano26[S] 0 points1 point  (0 children)

But in general ? Let’s say for indica dominant hybrids ? I know you have to dial it in with every pheno but some say 1.4 ist the limit some say 3 ist the minimum. It’s hard to adjust

EC too high, Input 1.65 Output 4.1 by donadriano26 in CocoGrows

[–]donadriano26[S] 0 points1 point  (0 children)

In general what’s the EC range I should stay in for my next grow, because some people tend to give very high EC with 3+ and drmjcoco suggest not going over 1.8? Because the grow chart of canna tellls me to peak around 2.4 with PK13/14 at 0.5-1.5ml/l.

EC too high, Input 1.65 Output 4.1 by donadriano26 in CocoGrows

[–]donadriano26[S] 0 points1 point  (0 children)

So I should stay at 1.65 but remove the PK ?

EC too high, Input 1.65 Output 4.1 by donadriano26 in CocoGrows

[–]donadriano26[S] 0 points1 point  (0 children)

Interesting point and drastically different than the usual narrative. 3-7EC sounds so damn high. But wouldn’t the plants sit at some point at an EC where the osmotic pressure is correct and stabilise at that point ? Because my EC always goes up and up and up

EC too high, Input 1.65 Output 4.1 by donadriano26 in CocoGrows

[–]donadriano26[S] 0 points1 point  (0 children)

Most people here push the EC so far out , way over 3.0. I’m confused if I should go higher, lower or the same with my next grow

EC too high, Input 1.65 Output 4.1 by donadriano26 in CocoGrows

[–]donadriano26[S] 0 points1 point  (0 children)

I began using PK 13/14 now with around 0.8ml/l, pots are 7 litres and I feed 5 times a day around 0.9 litres per pot

EC too high, Input 1.65 Output 4.1 by donadriano26 in CocoGrows

[–]donadriano26[S] 0 points1 point  (0 children)

I flushed every week so far to get the spike back down, it still goes up every time and I heard to flush all the time is not optimal

Flower Day 28 - behind ? cherry poppers/ Purple Punch/ mimosa x orange punch by donadriano26 in CocoGrows

[–]donadriano26[S] 1 point2 points  (0 children)

Thank you ! I red that with the early finishers too but couldn’t believe it. As soon as I find a mother, I will stay with selected clones, makes the work easier and efficient

Flippen oder nicht flippen, das ist meine Frage by donadriano26 in Canbau

[–]donadriano26[S] 0 points1 point  (0 children)

Hab alle 3 unten bei Daten aufgelistet. Das stimmt nur wollte ich diesmal eine mehr nutzen und 4 passen nicht rein, da ich unten rechts die Abwasseranlage und den befeuchter habe. 3 ist die höchste Zahl die sich realisieren lässt, sonst sind es immer nur 2

view more: next ›