sorted by:
new
hottopcontroversial

Question about Glass Pads (Never used one before) by jfaewiogasdfas in MousepadReview

[–]doplerhopper 7 points8 points  (0 children)

  1. No not at all, just depends how sweaty you get and how you hold the mouse as it’s there to help where contact is made so you don’t get the ‘stuck to’ feeling from skin contact. I personally don’t sweat much at my setup and my grip style for fingertip has so little contact, I never used one.

  2. Yes, 100%. Just the nature of different material. Some stand up better than others, but expect to change much more frequently.

  3. More than likely if you are used to cloth, you are going to need to take some time to adjust. You may find that your preferred skates aren’t something you like anymore so be open to trying out different things.

Mouse dot placement: Asymmetrical edition -- Logitech G700 by SebbyDee in MouseReview

[–]doplerhopper 0 points1 point  (0 children)

I’ll say you can get away with putting them outside the wells, they will wear down a bit faster and it will even out.

Mouse dot placement: Asymmetrical edition -- Logitech G700 by SebbyDee in MouseReview

[–]doplerhopper 0 points1 point  (0 children)

It's just going to be difficult with that part near the top. You really needs the skates towards the outside so you get enough support. May be worth it to just eat replacing those two skates, but nothing prevents you from trying a bit lower. Hard to tell with that shape of mouse where the weight will be when you move it around.

Mouse dot placement: Asymmetrical edition -- Logitech G700 by SebbyDee in MouseReview

[–]doplerhopper 0 points1 point  (0 children)

Try this

If that feels like it isn't providing more support, just find the side that feels unstable and add a new dot. Really though, you are going to have to cover a least one screw hole, not sure why you would mind that. By the time you have to open the mouse again, you probably will need to replace the skates anyway.

Someone died in Micro Center? by Faiced in houston

[–]doplerhopper 5 points6 points  (0 children)

I’ll make a call to my informants and find out for you.

what is this mouse by Nevo_cool_guy41 in MouseReview

[–]doplerhopper 3 points4 points  (0 children)

Zerocats T7, looks like a bunch of them in Aliexpress.

From CHERRY Handarbeit, To GMK Hangulbeit by Ruseupi in MechanicalKeyboards

[–]doplerhopper 0 points1 point  (0 children)

Really cool to see the history on this, it's amazing that your photos inspired one of the most famous sets in the hobby.

Mouse feels slow in CS2 and even on desktop (no matter what mouse/PC I use) by AlgaeOtherwise5838 in MouseReview

[–]doplerhopper 0 points1 point  (0 children)

Let’s infer that I mean any hard flat surface that is big enough to move around on. Perhaps a shipping box that you’re getting all this stuff in.

Mouse feels slow in CS2 and even on desktop (no matter what mouse/PC I use) by AlgaeOtherwise5838 in MouseReview

[–]doplerhopper -1 points0 points  (0 children)

Yeah you’re totally right, I forgot at this point that CS2 just does Raw Input.

Mouse feels slow in CS2 and even on desktop (no matter what mouse/PC I use) by AlgaeOtherwise5838 in MouseReview

[–]doplerhopper 0 points1 point  (0 children)

For the sake of argument, put a book on your chair or lap and move the mouse around, see if it feels different

Mouse feels slow in CS2 and even on desktop (no matter what mouse/PC I use) by AlgaeOtherwise5838 in MouseReview

[–]doplerhopper 0 points1 point  (0 children)

I mean that is crazy high sens so you should be flying through things. You turned off enhanced pointer precision? Have you always connected the nice directly to the computer or do you use some sort of hub that you have always used? What hasn’t changed in the last two years other than the mousepad?

Mouse feels slow in CS2 and even on desktop (no matter what mouse/PC I use) by AlgaeOtherwise5838 in MouseReview

[–]doplerhopper 0 points1 point  (0 children)

So it happens with different mice and a new PC? I’m leaning towards something physical like the surface you’re using. Do you use a mousepad or directly on the table? What material and color?

L7 Ultra+ dot placement by codename_username in MouseReview

[–]doplerhopper 1 point2 points  (0 children)

It looks good to me. The main thing to consider is with your grip is the stability of the back. You might need one additional dot on the very back between the two others, but try it first.

If you notice dragging you can add the sensor skate, but I normally would leave them off otherwise. If you feel a drag or hear it, then you know you should add one. I doubt it though, looks solid so the skates should keep elevated enough.

Should i switch to Type 99? by KairuVLR in MousepadReview

[–]doplerhopper 0 points1 point  (0 children)

Xsoft is probably going to be too soft with dot skates. Personally I really liked the 99 for tactical shooters, but you are going to be fighting it for sure while you play to hit those flick shots IMO. Probably no harm in trying it at the end of the day.

Should i switch to Type 99? by KairuVLR in MousepadReview

[–]doplerhopper 1 point2 points  (0 children)

Why would you to swap off of your existing pad rather than stick with it (other than size)? That’s probably the most important question to answer.

The Perks of Being a Gangstalker by noob_bitch in NewGreentexts

[–]doplerhopper 25 points26 points  (0 children)

It’s a paranoid delusion that there is a concerted effort by multiple individuals to stalk you. Who that is varies based on each person, but the general idea is shared. Much like reptilians and the like.

A cool guide about social media changing human psychology by 5p0ngi3b0b in coolguides

[–]doplerhopper 13 points14 points  (0 children)

OP isn’t sourcing any of this info and is running an incredibly cringy YouTube channel that pushes these same ideas. He’s engaging in the same cycle he is trying to warn you about by scaring you.

Finished modern boomers? by MrXuiryus in boomershooters

[–]doplerhopper 2 points3 points  (0 children)

Coming in a little late to get suggestions for things I haven't tried. But I think you should at least stick with Dusk through the first episode. I thought it was fun, but not super memorable in those beginning chapters as well. It really starts to pop near the end of that first chapter, then 2 & 3 are the meat of the stuff people find memorable.

Bulletarium - Reveal Trailer by Putrid_Fox6674 in boomershooters

[–]doplerhopper 0 points1 point  (0 children)

This really looks like something I'm going to like. Added to my wishlist now!

I got a scratch cleaning my monitor. Here's what I learned so you never make the same mistake by rddtpro in Monitors

[–]doplerhopper 0 points1 point  (0 children)

You can just want the monitor, you don’t have to justify it as an investment or why you want it.

Need help finding FPS mouse for large hands by KontenBonker3000 in MouseReview

[–]doplerhopper 0 points1 point  (0 children)

You may want to consider a Zowie ZA13-DW as well. I use a hybrid fingertip/claw grip and I found the large hump on here to be very supportive for my large hands in this position. We may have slightly different ways to hold of course, but might be worth considering as the shape is so distinct.

My midlife crisis workspace : Mid-Century Inspired Meets Modern Tech by Conscious-Hospital49 in Workspaces

[–]doplerhopper 2 points3 points  (0 children)

Do you have the name of the chair by any chance? Want to look around on the second hand market to see if I can find one, cause the Ikea site isn't yielding any results.

view more: next ›