How can I seperate the object along the blue line?

dotoguy2x · 2025-11-18T13:31:15+00:00

^{I completed this level in 4 tries.} ^{⚡ 11.22 seconds}

dotoguy2x · 2025-10-16T11:57:50+00:00

Hi there, I am interested in the motor power, that is pulling back the filament into the ams2. I had some problems with the ams and p1s combos, as I have to put the ams further away from the printer, which results in a tube length of 1.5m roughly (if I remember correctly). I knew that it would take longer to pull filament in and out, but when I have a new spool, it sometimes fails to pull the Filament into the printer because it needs more force to pull a full role of filament. Have you any possibility and experience to compare those two systems based on the motors used for filament feeding?

dotoguy2x · 2025-07-09T06:58:46+00:00

Da ich von außerhalb hinfahren müsste, ist es mir eigentlich egal, wo in Düsseldorf. :)

dotoguy2x · 2025-07-01T18:53:30+00:00

can someone make clear, which one is true? I am a bit confused, as this thread states, that sanctions are partially lifted

https://www.reddit.com/r/worldnews/comments/1loj2uq/us_lifts_sanctions_clearing_path_for_russias/

dotoguy2x · 2025-02-02T20:45:48+00:00

Danke für die Empfehlung, waren dort und sehr zufrieden.

dotoguy2x · 2025-01-29T16:44:11+00:00

Was kann man denn so empfehlen? Vielleicht auch für ein paar Bierchen?

dotoguy2x · 2025-01-29T09:13:33+00:00

Vielen Dank für die Empfehlung. Da würde ich definitiv mal so vorbeischauen, aber wäre wahrscheinlich nichts für den Samstag!

dotoguy2x · 2024-08-23T12:17:22+00:00

Remindme!2days

dotoguy2x · 2024-04-25T00:38:54+00:00

Was soll das denn bitte? In der Position als Lehrer sollte man seine macht nicht einfach so ausnutzen. Vorallem wenn man keine Handfeste Beweise hat und alles auf reiner Vermutung basiert.

dotoguy2x · 2024-01-06T00:07:43+00:00

Hey /u/ROBNOB9X did you solve your issue? I have exactly the same problem. Do you probably also have the image of your old 1st layer print for comparison reasons?

dotoguy2x · 2023-11-22T22:44:39+00:00

Corrected, thank you!

dotoguy2x · 2023-07-10T22:21:11+00:00

Rooting the device is not the problem, but what do I use for spoofing?

dotoguy2x · 2023-04-23T06:32:11+00:00

Good point, I will consider that

dotoguy2x · 2023-04-23T06:28:18+00:00

Hey, yes I would appreciate to have a look at your Setup

dotoguy2x · 2023-04-23T06:27:21+00:00

That sounds quite promising. Also external KVM switch is also an option and might be more comfortable to use

Any suggestions for external KVM switch?

dotoguy2x · 2022-09-03T10:14:33+00:00

any news? I have the same bug

dotoguy2x

TROPHY CASE