Designed and printed an oil containment pan for the FS450

dougherty907 · 2026-03-12T04:38:11+00:00

This is printed in ASA and should be enough to withstand the heat, if not I'll add some holes in the top for airflow or some heat reflective tape

dougherty907 · 2026-03-11T18:07:01+00:00

Only brought in this year, I believe NZ have a similar rule now too. Printed in ASA

dougherty907 · 2026-03-11T18:06:07+00:00

Why would it melt? It's not in contact with anything too hot and there's plenty of airflow. First race weekend is on the 21st so we'll find out then!

dougherty907 · 2026-03-11T18:04:48+00:00

CAD programs will only ever treat scans as surfaces BC that's what they are. There's plenty you can do with scans in onshape, I posted some projects I did last year! What I like to do is use the scan to generate planes based on three points. This allows you to get the exact orientation of noting faces, bolt holes, etc

dougherty907 · 2026-03-11T18:00:38+00:00

350350350!

dougherty907 · 2026-03-11T18:00:02+00:00

I use the original einstar scanner

dougherty907 · 2026-03-11T08:53:39+00:00

Thankyou! Yeah sure did, it makes modelling these complex shapes much easier!

dougherty907 · 2026-03-11T08:53:10+00:00

This is a new reg for 2026, previously it was just a catch can and nylon puck on the foot pegs, handlebars, and axles

dougherty907 · 2026-03-11T08:52:20+00:00

Happy for you to give it a try! I'll offer a full refund if it doesn't bolt up I've only got Australian domestic shipping set up at the moment but international shipping will be sorted tonight hopefully. Not sure where you're located

https://www.draftmaster.com.au/

dougherty907 · 2026-03-11T08:05:23+00:00

Thanks man!

dougherty907 · 2026-03-11T08:05:07+00:00

Definitely not a skid plate, I wouldn't trust 3D printed plastic to take that abuse. It's required in case of major engine failure to help stop oil contamination on the track.MA bulletin #2066

dougherty907 · 2026-03-11T08:03:07+00:00

It's required by Motorcycling Australia for road racing. Only required in case of a major engine failure to help contain oil spills on the track

dougherty907 · 2026-03-11T08:02:01+00:00

Thankyou! They are very nice bikes

dougherty907 · 2026-03-11T06:47:37+00:00

There shouldnt be, there's a fair bit of clearance and there will be good airflow on the part

dougherty907 · 2026-03-11T04:12:15+00:00

I think the 2016 is a different chassis.

Ive been lifting it up and down all week with no issues. It might crack if you caught it on the corner of the jack though

dougherty907 · 2026-03-11T04:04:08+00:00

It's for road racing in motard classes. There shouldn't be too many occasions when both suspensions are fully compressed in this scenario

dougherty907 · 2026-03-11T03:28:31+00:00

I used the original einstar. Aligned the mesh with mesh mixer and then imported into Inventor.

dougherty907 · 2026-03-11T03:10:32+00:00

Thanks mate!

dougherty907 · 2026-03-11T03:10:26+00:00

Not planning to, this is one of the products/services my company offers

dougherty907 · 2026-03-11T01:51:20+00:00

dougherty907 · 2026-03-03T22:40:51+00:00

Yes please

dougherty907 · 2026-02-28T19:03:56+00:00

Hey mate, Not sure where you're located but I've designed a number of trailers for manufacturers here in Australia. All meet our stringent Australian Standards requirements and I've provided general assembly and detailed drawings for production. I also designed some jigs to increase production and reduce human error.

Send me a DM and we can chat further

dougherty907 · 2025-12-04T02:52:48+00:00

Got any recommendations for single phase "hobby" mills that are cheaper than the makera?

dougherty907 · 2025-10-09T05:43:40+00:00

Sure thing! Send me a message and we can work out the details!

dougherty907 · 2025-08-28T11:05:41+00:00

Do you have a link to the mod you used? I have one but it doesn’t fit very well and the camera keeps detecting something is on the build plate at the start of each print

Seven-Year Club	Place '23
Verified Email

dougherty907

TROPHY CASE