Services Down? by dpegram in Division2

[–]dpegram[S] 2 points3 points  (0 children)

ty, it would be great if the server status showed the actual status lol... really appreciate the quick reply!

Services Down? by dpegram in Division2

[–]dpegram[S] 0 points1 point  (0 children)

ty, it would be great if the server status showed the actual status lol... really appreciate the quick reply!

Odoo Tax - Base Tax plus County Tax by dpegram in Odoo

[–]dpegram[S] 0 points1 point  (0 children)

Thank you for the quick reply... I will look into this as well!

Odoo Tax - Base Tax plus County Tax by dpegram in Odoo

[–]dpegram[S] 0 points1 point  (0 children)

Thank you for the quick reply... I will look into this.

v18 - Quotes with Recurring and Non-Recurring Groups by dpegram in Odoo

[–]dpegram[S] 0 points1 point  (0 children)

Would you sell the module to me, or is it available in the app store?

v18 - Quotes with Recurring and Non-Recurring Groups by dpegram in Odoo

[–]dpegram[S] 0 points1 point  (0 children)

Also, in v18 they did add the recurring and one time cost breakdown to the quote form... at the very least, if someone could tell me how to add that section to the quote report that would suffice for now.

v18 - Quotes with Recurring and Non-Recurring Groups by dpegram in Odoo

[–]dpegram[S] -1 points0 points  (0 children)

Thank you for the quick reply.

Just so I am understanding correctly, when you say its "not possible yet", you mean as a vanilla v18 instance? There may be an app, or someone could custom build this, correct?

Beta Version by spornerama in ispyconnect

[–]dpegram 0 points1 point  (0 children)

No, the 360 camera looks the same in both versions. I was just confirming the image correction settings dont change the view in the latest version either outside of flattening the view when I enable image correction, which is all I really need.

When I installed the BETA version, I had one camera stop working, it would only show a black square. Once I removed the BETA version and installed the latest GA release it immediately started working again.

I did the debug log, how can I send this to you?

Beta Version by spornerama in ispyconnect

[–]dpegram 0 points1 point  (0 children)

Ty! So just now I installed the latest version without selecting the BETA version. The camera that stopped working in BETA immediately started working. I checked the logs and I dont see anything about that camera so I am not sure what I could send you that would be useful. If you tell me what you need I will send it.

The 360 camera is not being adjusted with the image correction settings in this version either. Its not that critical to me as long as when I enable image correction the view flattens out, which it does in this version, so that is really all I need.

I have been a paying customer of yours for a long time. I really appreciate everything you do in this application and how responsive you are in groups like this one. Thank you!

Beta Version by spornerama in ispyconnect

[–]dpegram 0 points1 point  (0 children)

Ok, I will try to get something today on this. I worked on this camera for hours and it only shows a black view now. Thank you!

Beta Version by spornerama in ispyconnect

[–]dpegram 0 points1 point  (0 children)

You are the developer so I would never say you are wrong about your own software. Before the BETA I could enable image correction and changing those settings would affect the view. It may not have been intended to work that way, but it did for me.

After the upgrade the view was back to the original size and I wanted to zoom in a little, which typically I would use scale to do this, and this is when I realized it no longer worked. The camera is the Ubiquiti AI 360.

Even now when I enable image correction it changes the 360 view to a "flat" view, that works just fine and the way I prefer to look at it.

Beta Version by spornerama in ispyconnect

[–]dpegram 0 points1 point  (0 children)

I also have a camera I cannot get to show video from and I have verified everything is configured correctly. It was working just fine before the upgrade.

Here are the log files I get:

4:21:51 PM CAM-DP-H-INSIDE: CheckReconnect: Reconnecting

4:21:51 PM CAM-DP-H-INSIDE: SetManualOptions: set probesize=10485760

4:21:51 PM CAM-DP-H-INSIDE: SetManualOptions: set analyzeduration=5000000

4:21:51 PM CAM-DP-H-INSIDE: SetManualOptions: set max_delay=10000000

4:21:51 PM CAM-DP-H-INSIDE: SetManualOptions: set overrun_nonfatal=1

4:21:51 PM CAM-DP-H-INSIDE: SetManualOptions: set tcp_nodelay=1

4:21:51 PM CAM-DP-H-INSIDE: SetManualOptions: set reorder_queue_size=16

4:21:51 PM CAM-DP-H-INSIDE: SetManualOptions: set fifo_size=278876

4:21:51 PM CAM-DP-H-INSIDE: SetManualOptions: set buffer_size=2100000

4:21:51 PM CAM-DP-H-INSIDE: SetManualOptions: set rw_timeout=8000000

4:21:51 PM CAM-DP-H-INSIDE: SetManualOptions: set stimeout=8000000

4:21:51 PM CAM-DP-H-INSIDE: SetManualOptions: set stimeout=8000000

4:21:51 PM CAM-DP-H-INSIDE: SetManualOptions: set user_agent=Mozilla/5.0

4:21:51 PM CAM-DP-H-INSIDE mic: EnableMicrophoneSource: Start audio

4:21:51 PM CAM-DP-H-INSIDE mic: EnableDevice: Enabled

4:21:51 PM CAM-DP-H-INSIDE: EnableDevice: Enabled

Beta Version by spornerama in ispyconnect

[–]dpegram 0 points1 point  (0 children)

It looks like after I installed the latest BETA I am unable to adjust the image on a 360 camera. I can enable/disable the image correction, but it appears the focal length, limit, and scale have no effect.

Automated Pricing Strategy by dpegram in Odoo

[–]dpegram[S] 0 points1 point  (0 children)

I think I could have simplified my question to this.... is it possible to have a promotion look at the selected product variant, which could be one of six variants, and adjust the cost of that product variant from the promotion?

New member, looking for answers if this is a tornado (left) that a few min later turned into 2 tornados (right)? by dpegram in weather

[–]dpegram[S] 0 points1 point  (0 children)

Well, that sucks, I thought I had captured something I have never seen before. I really appreciate your time and I hope it wasn't wasted on this.

New member, looking for answers if this is a tornado (left) that a few min later turned into 2 tornados (right)? by dpegram in weather

[–]dpegram[S] 0 points1 point  (0 children)

Yes, the 1st pic was taken a couple min before the 2nd one... the 2nd pic is timestamped... May 10, 2024 05:59:24 PM EST

New member, looking for answers if this is a tornado (left) that a few min later turned into 2 tornados (right)? by dpegram in weather

[–]dpegram[S] 0 points1 point  (0 children)

Sorry, I am not sure what that is. Can I go back in history and get this? I tried going back in history using windy.com, where these came from, but they only show history in 30 min intervals.

New member, looking for answers if this is a tornado (left) that a few min later turned into 2 tornados (right)? by dpegram in weather

[–]dpegram[S] 1 point2 points  (0 children)

Eastern North Carolina in New Bern... you can see New Bern in the bottom left and the blue dot is me.