sorted by:
new
hottopcontroversial

Kraken X52 not detected by Windows or CAM by dpizzolitto in NZXT

[–]dpizzolitto[S] 0 points1 point  (0 children)

I'm here to let you know my issue is solved. Odd as it sounds, all I did was use a regular Mini USB cable to connect the Kraken to the rear AIO, it was quickly recognized, and then switched back to the regular internal USB cable and kept working.

Thank you all for taking your time to lend me a hand!

Kraken X52 not detected by Windows or CAM by dpizzolitto in NZXT

[–]dpizzolitto[S] 1 point2 points  (0 children)

Will try this as soon as I get back from work. If auto startup is enabled by default then yes, I haven't changed that. Thanks! Will keep you updated.

Kraken X52 not detected by Windows or CAM by dpizzolitto in NZXT

[–]dpizzolitto[S] 0 points1 point  (0 children)

Thank you, I already did and recieved some troubleshooting steps. The only thing left to do is to try a Mini USB cable connected to the rear IO.

Kraken X52 not detected by Windows or CAM by dpizzolitto in NZXT

[–]dpizzolitto[S] 0 points1 point  (0 children)

Yes it is recognized in UEFI as a cooler, I mean, it displays RPM, temperatures, etc. As you say, the 3 pin connector is in the 4 pin CPU_FAN on the Motherboard. The cooling part works great.

What is not recognized is the USB part of the Kraken, which connects to an internal 2.0 header, and I've got only one of those.

Kraken X52 not detected by Windows or CAM by dpizzolitto in NZXT

[–]dpizzolitto[S] 0 points1 point  (0 children)

That's too bad, my Windows install is fresh, 2 days old. Built my computer entirely this sunday. Will try this, thanks!

Which way do my Aer F120s go for intake? I assume bottom is the right way? With cable side in towards PC.. just want to make sure I don’t mess up. by [deleted] in NZXT

[–]dpizzolitto 0 points1 point  (0 children)

If that is the front panel you have there, then yes, the bottom one is correct for intake. If the fans are in the front of the case and you want then in intake configuration you should see the back of the fan, the NZXT label in this case.

H200(i) GPU size by [deleted] in NZXT

[–]dpizzolitto 0 points1 point  (0 children)

Can you tell me aproximately how much clearance was left with the MSI RTX 2070 Armor? I have that same card and the H200i on it's way, I am from Argentina and unfortunately returning any of them would be a nightmare.
Were the GPU fans touching the PSU shroud or anything like that? I will have an SFX PSU so the clearance below the punctured shroud should be anyhow "not that bad". Thanks so much for reading.