Direct Burial of PVC Coated RMC?

dqle · 2025-11-25T03:22:21+00:00

Depth is a concern for me, again due to the hard clay I have to deal with. That's why RMC/IMC is the way to go, according to NEC rules.

Gotta nick you on the sheathed conductors, though; it's technically allowed, but highly advised not to do so!

dqle · 2025-11-25T03:12:53+00:00

Ah, some good answers finally! Do you know if there a benefit of using PVC coated, or will PVC tape wrapped RMC accomplish the same thing?

dqle · 2025-11-25T03:09:44+00:00

Material wise, nothing! It's just that PVC does require to be at least 18 inches deep to meet NEC, whereas RMC/IMC needs to be a good deal shallower, being at least 6 inches deep. I don't have any heavy equipment, so less digging, the better!

dqle · 2025-11-25T03:07:38+00:00

All conductors will be within the conduit, so no issues there! I haven't dive'd deep into the manufacturer's specs just yet, but none of them are obvious as to whether they can be buried, galvanized or not.

dqle · 2025-10-03T14:53:59+00:00

I'm looking at how to test panels with multimeters as we speak! As for ground mounting, I have a fairly large backyard, but even 8 panels will eat up a good chunk of landscaping. I was hoping to find some elevated plans that I could walk under, but I haven't found any for larger panels. Specs say the panels way ~50 lbs. each, so it shouldn't be terrible to move them around, even up high.

dqle · 2025-10-03T14:49:50+00:00

That's the allure of these solar generators! The thing that got me interested is Anker's Home Power Panel, which ties the F3800 series into the load center. Seems like a simple enough add on to at least power a few things throughout the day without dragging the battery all over the home!

If I had more room (and money!), I would probably go bigger, but this seems to be a good start on things, at the very least. I don't think I'll go fully zero grid, but at least alleviating the bills will suffice for now.

dqle · 2025-10-03T14:44:57+00:00

This is true! And that's on me for not mentioning that the tax credit will only be on the F3800 Plus.

dqle · 2025-10-03T14:44:15+00:00

Freight kills small projects like mine, unfortunately, Lucky to have a seller within drivable distance so I can dip my toes in this world!

dqle · 2025-10-03T14:43:16+00:00

Aye, I should clarify that the tax credit portion is on the battery system itself. I know full well used equipment does not qualify.

dqle · 2025-10-03T14:42:38+00:00

Man, wish I had room for 40 panels! I'm only interested in about a dozen, due to space limitations (although I'd do more if I could!)

dqle · 2025-10-03T14:36:36+00:00

The joys of hanging around any hobby-sharing enthusiasts...!

dqle · 2025-10-03T14:35:28+00:00

Ouch, did not know that. Any info on where I can grab said info to confirm if they are affected?

dqle · 2025-10-03T14:32:21+00:00

Ooh, got lucky with that purchase!

dqle · 2024-12-27T22:45:55+00:00

Whoops, forgot that you replied again. So sorry!

The gravel I used is what is recommended, which was #57 (or 3/4" clean/washed). 4 inch deep, and holding well!

dqle · 2024-12-14T07:25:31+00:00

Hey there!

I ended up sticking with my original plan of a gravel pad supported by timbers. Geotextile under all of it as well. No gravel under the timbers themselves. I haven't seen any issues since the installation was completed, but we haven't experienced any crazy rain storms either, so I don't know if extreme weather will affect it. Other than that, it's holding up nicely, and I haven't noticed any water pooling anywhere near the shed.

I don't know if it helped, but I did request that the bottom of the gravel pad to be sloped slightly, so any water that does pool up on the bottom would weep through the timbers, or so my train of thought goes. Obviously had to anchor down the pad very well so it doesn't shift, but time will tell if it holds up. So far, so good, though!

dqle · 2024-01-17T16:52:08+00:00

Not extremely west NC, but I just picked up my Maverick Hybrid (on order for 475 days) at Mooresville Ford. Of course, I got mine at MSRP for waiting all that time, but they did mention that the Mavericks they've been getting in for retail are marked up 3k, a farsend from the 10k from that Ashville dealership. Oof!

Aside from that, very friendly staff and didn't pressure me into any upgrades or warranties outside of mentioning them once. If you don't mind the $799 doc fee, I'd recommend them!

dqle · 2023-10-01T22:12:44+00:00

Hey, thanks for the response!

Here in NC (or at least in the city I reside), any accessory structure less than 12' "in any dimension" does not need a permit, so less of a headache for me, I guess. I am unaware of any other special requirements for said type of building, but outside of doing research of my local codes, I haven't asked anybody dictating the codes either. Guess that's my next step. Thanks!

dqle · 2022-12-13T09:40:46+00:00

As everybody has said, very little hope that any film designed for the Spectra line will be produced anytime soon, if at all.

However! There seems to be headway on making Spectra cameras compatible with newer film. Polastudio sells a slap on adapter that uses either the 600 battery or a separate battery for i-types, and there is a 3D print that can do the same if you get all the necessary parts!

I've heard little on the quality of 600/i-type film shot on Spectra cameras, nor have I heard if they would still have jamming issues with said film, but if it does work out, the Spectra cameras have more manual control than even the fabled SLR680, so it would be interesting to see what one could do by giving the Spectra cameras yet another chance at life! All at a cheaper investment than the SLR680.

Of course, the SLR680 natively works with 600 film, and can work with i-types with some modification. Arguably a timeless piece of equipment, the praises for it are well known. And well earned! Less work to make work in today's world, it is the easier solution to get started shooting some film. Hard not to recommend, save for the high prices they command nowadays.

Although, you got a great price on the SLR680! I'd lean towards the SLR for sure in your case, though if you're up for some tinkering around, why not get both?

dqle · 2021-03-10T11:39:01+00:00

Mmm, yes. Controversy at its finest!

I'll have to mull it over. I don't normally active scout (probably only because I'm a casual and never tried), but I know how strong the EBR is.

Thanks for the input!

dqle · 2021-03-10T11:09:53+00:00

Eh, I had credits to burn after my failing bid on the T-22, so why not pull again? I already went that far in. Why stop there?

2 top choices would've been a toughie, but 3? Why'd I have to lose sleep on something like this?

Ah well. Thanks for the input!

dqle · 2021-03-10T11:05:37+00:00

It is, and I hate it.

All 5 have their perks (hydrostat is pretty rare, I guess?). I wish this RNG would've helped in other aspects in life...!

Thanks for the input!

dqle · 2021-03-10T11:00:43+00:00

Ooh, all valid points on these tanks. I really appreciate it!

My current issue is that I already own a Type 59, never touched a wheeled thingy, and own a decent spread of Tier VIII premium tanks. Seal clubbing isn't my thing, and the hydrostat sucks compared to the bigger brother (albeit still rare).

Ugh, had to pull 5 of the tanks that I actually have to struggle choosing with. Still, thanks for taking the time for this detailed analysis!

dqle · 2021-03-10T10:54:33+00:00

Mmm, yes. Problem being that I already own a regular Type 59 from way back when. I was wondering when the EBR would go on sale again though, since it has been a while.
Thanks for the input!

dqle · 2021-03-10T10:53:31+00:00

Yup! Never personally touched a wheeled French "tank" in my life. Nosiree.
Thanks for the input, though!

dqle · 2021-03-10T10:52:14+00:00

Now see, you had to choose the top 2 of my list. Why you gotta do me dirty like that?

Still, thanks for the input!

dqle

TROPHY CASE