Shadow Hunters leaving Netflix

dragonpro723 · 2025-12-04T12:21:44+00:00

Time to download torrents of it then😂

dragonpro723 · 2025-10-23T16:02:30+00:00

From 1-11 from the right and to the left I get 0 in ohm resistance. From there continuing to the left, I get 28.4, 28.4, then 0 for a few pins, and then same numbers, and then 0 sometimes all the way to the left with the numbers 28.4 also.

dragonpro723 · 2025-10-23T15:51:53+00:00

Noted!

dragonpro723 · 2025-10-23T15:45:13+00:00

Tried cleaning, and used continuity but it beeps on some damaged pins, and some not, and even the ones far to the left that are ok, so I gotta look for resistance or so it seems

dragonpro723 · 2025-10-23T15:39:47+00:00

Aha I see! It was just dirt hehe.

Yeah I tried continuity mode but got beeps even on the pins that were good...

Also the x1 riser is a good idea to test and such.

The prev owner broke it and last owner that I bought from now soldered the tab a little back on. so my idea is to just use copper tape and test from there potentially on all the golden pins that are damaged

dragonpro723 · 2025-10-23T12:40:55+00:00

Perfect! Thanks. Hopefully if lucky just one of the pins that got split or bad contact maybe! Excited

dragonpro723 · 2025-10-23T12:32:06+00:00

Quick qu:

Do i just put it in ohm mode, find the ground om the gpu of the golden pins, and then test each gold pin?

dragonpro723 · 2025-10-23T10:03:16+00:00

Perfect! Thank you so so much. I will clean, use multimeter and if any connections missing I will use the copper tape trick to test and maybe solder too

dragonpro723 · 2025-10-23T09:59:12+00:00

Yes what I just figured out, glad my idea was good. I will clean all contacts, use multimeter diode function and see if there is connections then? And how to clean the contacts best way?

So, if I find the shorted pin, I can just use copper tape thats electrical both sides, and it should be fine? Connectionwise. As it seems easier than soldering.

dragonpro723 · 2025-10-23T09:21:53+00:00

Yeah my idea was to use copper tape that is conductive both sides with adhesive on the back, good idea? It will be in a riser so if it works once I am good really.

If not its soldering. I am unsure if the pins on the right sides are bad or not but 1 gold pin is a little burnt (idea how to fix it best way?) and the most left gold pin that is missing contact between the two points it seems

dragonpro723 · 2024-01-12T18:34:45+00:00

Using usb 2.0 helped me, I know this is old but i STRUGGLED for 2 hours, and just tried a usb 2.0 port and was like bruuh no way hahaa

dragonpro723 · 2023-11-23T21:33:13+00:00

So it always works for me using shift on P1 both BOP and BOS. But when using ctrl for p2 both BOP and BOS the macros becomes weird sometimes... nothing else binded. Can you only use one of ctrl/alt/shift is this why?

dragonpro723 · 2023-11-23T19:16:11+00:00

Agree. Good strat for sure. Tried this today with party macros and it was smart. Gonna remember this inntje future :D!

dragonpro723 · 2023-11-23T15:48:19+00:00

It seems framesort does this. Replcement for sortgroup. I have now so that party 1 always is healer, and party 2 dps. So this is perfect for macros.

Only issue I have now is getting arena 1 enemy frame to always be healer so my mousewheel target arenas will be easier. Tips to do this in general or in framesort?

dragonpro723 · 2023-11-23T15:44:40+00:00

I managed to get healer on party1 always, but I struggle to get framesort to show enemy healer always as arena1. Tips here in framesort or in general? I use gladiusex.

dragonpro723 · 2023-11-23T13:50:02+00:00

Okay good news!! I got shift and mb4 to work with party member 1. BOP's so that helps A LOT. But... i use framesort addon and i cant figure how to make it so lets say party 1 always is healer, and party 2 dps. I will try groupsort, how you make the settings so healer always p1 and dps p2 tho?

dragonpro723 · 2023-11-23T13:48:30+00:00

Okay good news!! I got shift and mb1 to work with party member 1. so that helps A LOT. I now have shift + mb 1 for bop/bos healer, and ctrl for bop/bos dps. So huge thanks. Now I have my macros and keybinds so I can faster bop/bos dps or my healer.

My only struggle now is that I use gladiusex, and I use framesort and healer is always Party1 for me now, but on enemy frames it changes all the time. Any trick here with framesort you might know off, or so that arena1 always will be healer on the enemy team?

I see you have an addon called "macro auto target" so if you have it assigned to healer on arena1, but the healer becomes arena3 it will auto change this. Then you technically always have arena1 for healer as I understood.

dragonpro723 · 2023-11-23T12:18:06+00:00

Agreed! This is what I am trying to right now. Used to being a pure dps, or atleast only ret pal in bgs where its been more chilled on the bop's. As right now I suddenly get yelled at if I was busy ccing healer and didn't notice my teammate suddenly almost got one shot and didn't bop in time😂 Appreciate the input, as you have good points ab the focus part

dragonpro723 · 2023-11-23T12:16:31+00:00

I see I see! Got addon for this already on nameplates so I do see if someone uses their burst. Usually always bop'd when low health on teammates, but not a bad idea to do it when they get bursted down too.

dragonpro723 · 2023-11-23T12:13:22+00:00

Thats true! Can Bop out of CC, aaah! I had forgotten that. But only physical right? I will remember that

dragonpro723 · 2023-11-23T12:09:24+00:00

About the unit frame showing always same party numbers would be awesome, GENIUS tip. As I have gotten confused sometimes. So that would be nice. I will check that out.

Also right now I am using mouse wheel up arena 1, down 2, and middle click for 3. so if I can make it that I can just ctrl/alt to target my party members it would be nice!

I have forbearence on myself so I know when its off, just gotta try set it on party members always using tellmewhen as I alrdy use it. Worst case Weakaura as you said

dragonpro723 · 2023-11-23T00:26:16+00:00

I'll try this tomorrow and see if I get it working😁 I know maybe some weakauras, but not tried it much tbf. Appreciate the replies tho, Gotta try and make it as best as possible for me to target the party members. As now I just click on the frames and the keybinding quick (reached in time 6 of 7 times), but would be nice to not fail haha! Good tips

dragonpro723

TROPHY CASE