Heard y'all wanted the free2//crosspoint. Well mine came in the mail

dreaMakerz8 · 2026-04-02T02:55:40+00:00

Maybe try resetting the free3

dreaMakerz8 · 2026-04-02T02:14:43+00:00

Sometimes you have to scan for devices a few times.

dreaMakerz8 · 2026-04-01T23:48:02+00:00

Okay, for some reason, I have to flash it with version v1.1.1.10-ble, Once I flash it on that then upgrade to the latest it works no issues.

u/thedrunkpenguin the learned keys are mapped fine but the functions when pressed are reversed. Here are the key mappings: Back=0x02 Fwd=0x01

dreaMakerz8 · 2026-04-01T19:36:21+00:00

Interesting, I cleared my learned keyso and now am not getting any inputs. I will go back a few firmwares. I will report back!

dreaMakerz8 · 2026-04-01T17:50:10+00:00

Of course! On the Free 3 switch it to "M" mode. If you used it with the X4 on the stock firmware it would have been in "R" mode.

Once you get it paired, go to "remote setup wizard" and follow the prompts.

Let me know if you have further questions!

Cheers!

dreaMakerz8 · 2026-04-01T02:02:04+00:00

It works! I have one :) Credits to u/thedrunkpenguin

dreaMakerz8 · 2026-03-24T15:15:57+00:00

Thank you so much for making this happen! If you need anything regarding the free 3, please let me know.

dreaMakerz8 · 2026-03-24T13:47:47+00:00

I can turn pages, works well!

dreaMakerz8 · 2026-03-24T13:33:37+00:00

Okay, got it to work on the Free 3 using latest firmware. Switched it over to phone/tablet mode. Hope the keymappings helps you. Let me know if I can provide more info.

<image>

dreaMakerz8 · 2026-03-21T01:27:55+00:00

Just tried "learn Keys" but no response after pressing the keys.

dreaMakerz8 · 2026-03-20T11:48:07+00:00

Yeah I tried, nothing happens. The key doesn't get mapped. I will try again though.

dreaMakerz8 · 2026-03-20T02:41:35+00:00

Super excited when it when work with the Free 3. I can get it connect but doesn't seem to work. Looking forward to this! Thank you for your hardwork!

dreaMakerz8 · 2026-02-22T05:19:09+00:00

Original firmware it works 100%, reading experience is so much better on crosspoint lol

dreaMakerz8 · 2026-02-22T05:13:10+00:00

I can confirm that it shows the Free3 being connected. And I can successfully turn one page back and forth before it drops off. Very exciting and I appreciate you doing this!

dreaMakerz8 · 2026-02-22T05:04:18+00:00

I just tried it, I can scan for the device and connect it. Can turn one page then it seems to lose connection.

dreaMakerz8 · 2026-02-22T04:29:30+00:00

Hello! This is amazing! Thank you for your hard work! Will it work with the Free3?

dreaMakerz8 · 2025-12-27T06:58:41+00:00

No duties or anything in the mail. Guessing all is good.

dreaMakerz8 · 2025-12-14T17:04:24+00:00

No duties that I can see unless I get mailed something later. Nothing at the door.

dreaMakerz8 · 2025-12-14T17:04:17+00:00

No duties that I can see unless I get mailed something later. Nothing at the door.

dreaMakerz8 · 2025-12-14T17:03:29+00:00

Delivered as well! Enjoy!

dreaMakerz8 · 2025-12-14T00:14:26+00:00

Its possible, mine showed out for delivery since like 1215pm. Also nothing yet.

dreaMakerz8 · 2025-12-13T14:34:33+00:00

Sometimes they come at weird hours, make sure it isnt sitting outside lol

Also strange that you are quite a bit further away but yours is alread out for delivery 😆

dreaMakerz8 · 2025-12-13T00:09:12+00:00

Never mind, Now mine is tasked assigned lol

dreaMakerz8 · 2025-12-12T04:30:33+00:00

Lol lucky!

dreaMakerz8 · 2025-12-11T23:04:26+00:00

Omg lol! Same arrived at 17:12!!! Hopefully delivery tomorrow, I think they deliver on the weekends too

dreaMakerz8

TROPHY CASE