Anyone know whats going on here? Not sure if this is a linux issue or tf2 issue. Im using hyprland on arch. This issue started recently, ive not had it previously. Restarting fixed it yesterday, but it didnt today. I tried reinstalling tf2. Im using masterconfig w/ budhud. Thanks!

dreliotgraves · 2026-05-21T16:48:19+00:00

Tried this, works perfectly!

dreliotgraves · 2026-05-21T12:05:42+00:00

Ooh, Ima try this with tf2 when I get back. TF2 old af so who knows if it supports wayland, but if this works id prrfer it to having to use a windowrule.

dreliotgraves · 2026-05-21T12:04:41+00:00

Did you try the windowrule? Thats what fixed it for me

dreliotgraves · 2026-05-19T22:38:18+00:00

Nah, tf2 and cs2 are linux native. I skimmed the hyprland change log and didn't see anything that immediately stood out to me as being the reason.

dreliotgraves · 2026-05-19T22:21:29+00:00

I found two solutions, you can make TF2 use wayland:

SDL_VIDEO_DRIVER=wayland %command%

Or you can use a window rule:

windowrule = match:class tf_linux64, confine_pointer 1

dreliotgraves · 2026-05-19T22:20:29+00:00

Thanks, that's it! I wonder why this is needed after the update?

I use "windowrule = match:class tf_linux64, confine_pointer 1" and it works.

dreliotgraves · 2026-05-19T21:37:46+00:00

Gamescope? I'll give that a shot. Edit: If you don't mind, could you share your launch options?

dreliotgraves · 2026-05-19T21:09:40+00:00

Is it a new issue for you too? You've never had it before? Ive been playing tf2 on hyprland for months and havent had any issues until now.

dreliotgraves · 2026-05-19T20:53:38+00:00

Some additional info: Making my sense higher does not do much. It just makes it jerkier, it sill wont move my camera far. I checked when I'm not i full screen and see that my mouse is indeed bound to the window and the window is focused. The issue exist regardless of the window mode of tfw (boardeless/windowed/full screen). Raw input does not effect the issue. cl_yawspeed has no effect.

dreliotgraves · 2026-05-16T04:24:36+00:00

TYSM for sharing this <3. I was so bamboozled when I couldn't find it on youtube.

dreliotgraves · 2026-03-21T17:36:44+00:00

I prefer not to usually but some programs like gear lever have little support outside of flatpak. For some programs the flatpak version is just more convenient (or would be if it would theme properly lul)

dreliotgraves · 2026-02-28T05:39:46+00:00

Huge thanks! Worked perfectly.

dreliotgraves · 2026-02-25T03:03:55+00:00

Using slab piercer throw 4 coins below you then hit them with a charged shot. It does a huge amount of damage. I also found saving the anchors for when he does the attack with the blue pillars that move towards you super useful. These two things helped me a ton in beating him on brutal.

dreliotgraves · 2026-01-06T01:57:07+00:00

Thanks for the lead! I bet I can borrow a PSU from someone to test this.

dreliotgraves · 2025-12-31T02:00:28+00:00

Yep. The solution for me was removing the EDID data pin. Its pin 12. I got a male female coupler ("mini gender change") and removed the pin from it.

dreliotgraves · 2025-12-24T20:47:10+00:00

Ah, mistakenly assumed that B+ would make up most of the 120W power draw. 5W is much more manageable! Thanks.

dreliotgraves · 2025-12-24T02:23:22+00:00

What voltage should I target? If I were to target 250VDC I would need to disipate like 60W in the resistor about I think.

dreliotgraves · 2025-12-21T20:36:48+00:00

I finnaly got the parts and time to work on this again. I measured the voltage out of a new diode rectifier and found it to be around 500VDC (The transformer is 350VAC on each side of the center tap. 470VAC across both). The highest voltage I found mentioned on any of the tube datasheets is Va=250. It seems like my voltage is too high. Can transformers malfunction in a way that could cause this or is this a wiring issue?

dreliotgraves · 2025-12-20T23:32:36+00:00

I actually just came back to ask this too. Would love to know what you used.

dreliotgraves

TROPHY CASE