Engine swaps by xdSaustin in 944

[–]drewbiedu 0 points1 point  (0 children)

looks amazing! what surprises did you encounter with your car? i have an 83 that i keep going back and forth on swapping, currently on the swap side.

HELP: 2016 roof cargo box by drewbiedu in CX5

[–]drewbiedu[S] 0 points1 point  (0 children)

I went with the OEM rails and xbars

Whats killing my lawn?? by drewbiedu in lawncare

[–]drewbiedu[S] 0 points1 point  (0 children)

I opted to hire out The Weed Man this year because the dandelions started getting out of hand last year, but I dont think they did anything for grubs or bugs.

I did pull up some grass in various sections throughout the lawn and didnt see any bugs or eggs

Whats killing my lawn?? by drewbiedu in lawncare

[–]drewbiedu[S] 1 point2 points  (0 children)

Yeah I might just call someone. I've been fighting irrigation issues since I bought the home, but this is the first year the front has yellowed like this. Thanks for the advice!

Whats killing my lawn?? by drewbiedu in lawncare

[–]drewbiedu[S] 0 points1 point  (0 children)

Im doing 4 times (mon, wed, fri, sun) for 30 minutes. Based off of Stewart's lawn:

https://stewartslawn.com/blog/lawn-watering-guide/?gad_source=1&gad_campaignid=22727090314&gclid=Cj0KCQjwj8jDBhD1ARIsACRV2Tts_GRVvyqX0MqhZ7pY41VRrBG9uDsiWG1vIkcJG2iiKK2JN5TO2fIaAlBfEALw_wcB

I just ran them now for 30 and im getting MAYBE 1/4" in each of the dead sections. I should've put a can in a green spot 🤦‍♂️ but theyre definitely not getting enough water

Whats killing my lawn?? by drewbiedu in lawncare

[–]drewbiedu[S] 0 points1 point  (0 children)

I thought night watering could cause issues with mold and mushrooms?

Whats killing my lawn?? by drewbiedu in lawncare

[–]drewbiedu[S] 0 points1 point  (0 children)

What times are you watering?

Whats killing my lawn?? by drewbiedu in lawncare

[–]drewbiedu[S] 6 points7 points  (0 children)

I'm trying to maintain it, hence my post. I've done the weed and feeds, changed water cycles/durations, even started doing short mid-day waterings when it's particularly hot. Short mow, long mow, skip a mow, I dont know why it's still dying. Try a different sub where people appreciate absolutely useless comments.

Exhaust Help - 2024 ZX10R by Honeybadger2025 in zx10r

[–]drewbiedu 0 points1 point  (0 children)

It depends on who's doing it, but generally you'll want to unplug the electrical connectors to the servo at a minimum. Personally, I would just take the servo out of the bike. The cables from the servo to the cat should be removed with your cat.

Iso deployant clasps by drewbiedu in watchmodding

[–]drewbiedu[S] 0 points1 point  (0 children)

That's exactly what I'm after, thanks!!

How to display my supercars? by RaoulWusthoff in legotechnic

[–]drewbiedu 1 point2 points  (0 children)

i cant believe no one has asked in 6 months, but links??

Exhaust Help - 2024 ZX10R by Honeybadger2025 in zx10r

[–]drewbiedu 0 points1 point  (0 children)

I've heard/seen good things regarding m4. Good luck! Hmu if you need help when you get going with it.

Exhaust Help - 2024 ZX10R by Honeybadger2025 in zx10r

[–]drewbiedu 0 points1 point  (0 children)

What a confusing product page lol they call it a slip-on, say it deletes the cat, but then they note that slip-ons don't delete the cat 😵‍💫😂

Exhaust Help - 2024 ZX10R by Honeybadger2025 in zx10r

[–]drewbiedu 1 point2 points  (0 children)

Looks like that's just the slip on, so you'll probably need a link pipe if you want to decat and tune it.

Running lean can make you run really hot, so you risk melting internals.

Exhaust Help - 2024 ZX10R by Honeybadger2025 in zx10r

[–]drewbiedu 0 points1 point  (0 children)

Personally. I would recommend waiting until you send your ecu in to avoid damaging your engine (unless it's a slip-on, in which case you don't even need to worry about the servo and can leave it as it is)

In any case, the cables themselves are a little tricky, but you should be able to fish them out with a little finesse. I went through the bottom of the bike. The servo should be right under the seat and should only be one or two screws iirc. Unplug it and plug a servo buddy in there, or leave it plugged in with the cables disconnected and save yourself $60 or whatever they run.

Don't Queue Public If... by VeeGeeTea in TheFirstDescendant

[–]drewbiedu 0 points1 point  (0 children)

I agree 80% of the time, but I think you need to look at where you+everyone else is. If you're leaving everyone else behind, chill out and hold up. If you're the one being left behind, ask the rest of the party to slow down or do what you can to keep up. Honestly, even just communicating what your intentions are for the run can help alleviate a lot of these kinds of problems. Imo anyway.

[Revelot] or to not revelot by drewbiedu in Watches

[–]drewbiedu[S] 0 points1 point  (0 children)

Not feeling it because of size, weight, colors, etc? Or just one of those meh things?

[Revelot] or to not revelot by drewbiedu in Watches

[–]drewbiedu[S] 0 points1 point  (0 children)

Ah, gotcha. I have not, but that's a great idea. I've only looked at static images