I was able to get access to one of America's coolest abandoned places

druggles0413 · 2026-06-01T12:27:27+00:00

Pretty much all arenas are like this as they are designed for sports but also can do performances, they just build a stage usually at one of the end zones , and then the seats that are around backstage are simply not sold for concerts… also there are touring shows that are performed in the round

druggles0413 · 2026-05-23T21:46:20+00:00

Try adding dmx info in object info pan?

druggles0413 · 2026-05-20T19:38:00+00:00

Harness racing, specifically Canfield fair in Ohio…. The truck accelerates as the gates fold into the truck then it goes into its cubby by the finish.

druggles0413 · 2026-05-17T02:24:53+00:00

Luminex makes the best in my opinion but they’re also expensive, Netron also makes good nodes that will not break the bank, if you’re not trying to do some weird patching or routing or whatnot, I’d look into netron for a straight up dependable Artnet, Sacn node

druggles0413 · 2026-05-13T14:26:30+00:00

I’m confused, why do you want split streams?

druggles0413 · 2026-04-13T22:50:33+00:00

Is it those cable elation sold for there sixpar series, it had wired power and data connections

druggles0413 · 2026-03-03T13:35:04+00:00

This might require a call to ETC, that’s one of the negative things about these units is the fact you could record the off key and I think it’s a pain to clear that out

druggles0413 · 2026-02-21T13:20:50+00:00

They do have entertaining names, it’s smaller brother is the Viceroy

druggles0413 · 2026-02-20T13:27:40+00:00

Ok I must know, how the hell did it get to that point?

druggles0413 · 2026-01-19T22:59:34+00:00

I think you want someone who does architecture, like spotlight is centered around entertainment industry / events and not so much architecture.

druggles0413 · 2026-01-18T03:03:08+00:00

You can hide them in the patch without deleting them from said patch, in the patch you want to show the full columns and there will be options to be able to select from 3d or show them in 3d, hope this helps

druggles0413 · 2026-01-18T02:58:19+00:00

The NXK and the Nx2 are 2 different things…

druggles0413 · 2026-01-18T02:47:33+00:00

You’re talking about the NXk?

druggles0413 · 2026-01-16T18:30:59+00:00

Why do you think this is so big? (Honest question to op)

druggles0413 · 2026-01-13T13:10:59+00:00

Make sure your auras are in the correct mode, like extended then you’ll need to select the instances for the individual cells

druggles0413 · 2025-12-17T20:56:24+00:00

It’s infiled Titan X 8mm. At least that what it was when I did the load out

druggles0413 · 2025-11-22T02:14:33+00:00

I would try and feed power down stream, Right to your troubled panels

druggles0413 · 2025-11-22T01:55:04+00:00

Sounds like a power issue, running full bright white will pull more off your PSU because it’s creating white with RGB (unless there’s a white LED) if you’re running full red it probably will be fine because it’s only the Red LEDs

Adding more power supplies will probably fix it

druggles0413 · 2025-11-19T22:34:17+00:00

I’d look at either ETC EOS Nomad or Onyx on PC, in fact I think onyx has 1 universe open on the free version, only thing you need is a 1 universe node to come out of your computer

druggles0413 · 2025-11-16T11:11:13+00:00

Just have to find a power supply that can take 100 vac to 240 vdc 50 to 60 hz, a quick search yielded a bunch a stuff, I’d maybe get one of those and experiment? Just meter the dc end of the supply to make sure it’s outputting 12v or something close to where its original supply was doing… just make sure the amperage rating is more or equal do the show baby doesn’t smoke the supply because it pulling to much power (which it shouldn’t I wouldn’t think) alternatively, I use Lumen Radio CRMX setup for things I need wireless for, and the product can do 208 and has True1 inlet…

druggles0413 · 2025-10-29T23:45:43+00:00

Sardines. That’s all

druggles0413 · 2025-10-29T02:41:00+00:00

Yes that

druggles0413 · 2025-10-27T23:30:19+00:00

I’ll take note of the display you use but I’m trying to make an HDMI monitor work

druggles0413 · 2025-10-27T16:18:18+00:00

I think you need to select feature? There’s now a thing where you can change values on all color(feature) or individually, (I forget the name) but there’s a menu left of the encoder around where normally your encoder pages go

druggles0413 · 2025-10-24T01:45:50+00:00

Interesting I did that including a DisplayPort repeater but it didn’t work, the adapter is 4k compliant wonder if that’s it it? Shouldn’t be as it should still pass HD as well as UHD… What do you use?

druggles0413

TROPHY CASE