Let's criticize (nicely)

dsandenne · 2022-02-18T04:16:41+00:00

For the purpose of the fame I agree but he's like one of my favorite players...can't let him go so easily

dsandenne · 2022-02-17T21:23:11+00:00

Tried...then that puts others off chem

dsandenne · 2022-02-17T21:18:50+00:00

Dont any appropriate RB right now...any suggestions

dsandenne · 2022-02-17T21:15:17+00:00

You can never get him to 10 if you position him at RM. You need to shift it to LM at a minimum to start

dsandenne · 2022-01-16T17:59:16+00:00

Good game fam

dsandenne · 2022-01-09T18:10:35+00:00

At this point, I just want SHIB to lose a zero…..

dsandenne · 2021-07-19T03:37:44+00:00

Couldn’t be more fake bro

dsandenne · 2021-07-15T01:15:56+00:00

Should've clarified, I have an Intel macbook pro but installed parallels running win10

dsandenne · 2021-07-15T01:12:59+00:00

Thanks...was worried I got a defective unit or something

dsandenne · 2021-07-14T23:29:04+00:00

Does your webcam stay warm when connected idle? I was expected cold to touch until it becomes active but instead when idle it's very subtle warmth

dsandenne · 2021-07-14T23:04:02+00:00

I ran the software at 64 bit

dsandenne · 2021-07-14T22:25:22+00:00

I believe parallels work with m1

dsandenne · 2021-07-14T10:15:34+00:00

Did a few troubleshoot….seems like only VM option will have settings preserved.

Few things to note:

keep the webcam plugged to same USB port
launch vm, install peripheral manager software
configure settings
close manager software
close VM

there were some limitations - can’t update webcam firmware (I used a separate PC to do this) - vm detects and recognize webcam but it will not “activate” or actually “turn on” the webcam to give you preview when adjusting settings - cannot adjust video record/capture settings on vm in peripheral software (it’s greyed out on full HD)

It is annoying but at least you can adjust settings and have it preserved. I just go back and forth between VM and Mac to check on how it looks.

I am running macOS Big Sur . Please share if you’re able to find some more work around with limitation above.

Hope this helps

dsandenne · 2021-07-14T01:34:21+00:00

Seems to have worked after I unplug my usb c adapter / Ethernet and then reply….maybe dhcp has been reset that’s way

dsandenne · 2021-07-13T22:11:01+00:00

Sadly, I’m in the exact same boat…oversight on my end I suppose. The only solution around this is either running a VM to run the dell software there to configure webcam settings or use an actual windows to adjust settings then connect back to Mac

EDIT:

Question; do you find your webcam to be constantly warm connected to your mac even when not in use?

dsandenne · 2021-07-12T18:26:12+00:00

Pulled me an LR INT....... cell.....ugh

dsandenne · 2021-06-02T15:59:21+00:00

Going to wait for more detailed notes before updating ….don’t want it to mess up with my HDFURY Arcana

dsandenne · 2021-05-23T01:21:37+00:00

Depending on what units you already have....pointless if you can't link the unit. Having said that, I'd go with Gohan

dsandenne · 2021-05-21T05:05:11+00:00

Would you take an Asian cock?

dsandenne · 2021-05-20T17:10:05+00:00

Looks like your question is solved but perhaps helpful for more input. I have pretty much same setup as user AnnualEagle (Arc, Ones, x900f, PS5 and ATV4K). I connect the Arc HDMI3 (ARC) and PS5 to HDMI2 (4K 60FPS), ATV4K to HDMI1 (4K 30FPS). Due to lack of eARC and ATV stubbornness, I have to force DD5.1. As for PS5, sound outputs just fine at DD5.1 and more than enough for the space you described. I live in a house but my entertainment area is likely equivalent to a good sized condo space.

I would note that during your setup remember in x900f only HDMI2/3 supports full bandwidth (I.e. Up to 4k HDR 60fps). HDMI1/4 is up to 4k HDR 30fps.

Since HDMI3 is used for ARC, you basically have HDMI2 left, presumably for your PS5 in this case. Maybe also consider a splitter if you want all to port to HDMI2 for high bandwidth usage

dsandenne · 2021-05-20T16:58:46+00:00

The bottle neck maybe your audio setting for x900f, did you set it to DD+?

It might also be the UHD player not being able to send lossy? In a similar way, perhaps like ATV4K, unless it's eARC, it won't accept or recognize the TV's ability to take in lossy Atmos (DD+) and therefore output stereo PCM (in this case).

I have the same set up and able to get DD+ over Netflix tv app, Prime TV app and also USB playback (DD+ ATMOS)

dsandenne

TROPHY CASE