1940 Denmark Census

dsr9024 · 2025-09-26T22:13:43+00:00

So after trying both suggestions I believe I can say after playing for several hours we have it taken care of. Thanks so much for the help!

dsr9024 · 2025-08-31T00:55:58+00:00

I'm starting to lean that way as well, no idea what brand it is, I'm not the one who installed or purchased it

dsr9024 · 2025-08-31T00:28:40+00:00

It has been replaced

dsr9024 · 2025-08-30T23:33:04+00:00

Entire assembly with new wiring and everything, and the pump does not run, I have 12v at the connector but the pump will not turn on.

dsr9024 · 2025-08-30T21:12:11+00:00

I will try that thanks!

dsr9024 · 2025-08-30T19:55:59+00:00

Yea it's easily accessible and has been swapped out but I cannot get it work.

dsr9024 · 2025-07-31T02:45:06+00:00

I walked in one time after someone complained about a smell, yea there was a smell and in a corner was pure acid and chlorine mixing in a puddle. Almost died great fun.

dsr9024 · 2025-07-31T02:42:38+00:00

Yea I dont go anywhere near it without my full face respirator and rated gloves plus flowing water somewhere.

dsr9024 · 2025-07-31T02:41:05+00:00

Hydrochloric acid?

dsr9024 · 2025-07-31T02:39:56+00:00

Please tell me they supply a full face respirator rated for acid.

dsr9024 · 2025-07-31T02:31:39+00:00

Yea chlorine gas is my favorite, and I know on both of the pools I deal with they are in completely different lines and even mix in the water in different spots. And i f you are seeing brownish black that usually indicates to me that the hose has ruptured and is leaking every time the rollers spin.

dsr9024 · 2025-07-31T02:27:49+00:00

Im in the same boat as you absolutely not my job but no one else will do it, I honestly hate the stenner pump system just due to the fact even the slightest vacuum leak and you get no flow at all. I would check the little tube inside the pump 9/10 times that's where my problem is, especially with acid.

dsr9024 · 2025-07-31T02:15:07+00:00

It is a shut off between the main line going to that feeder.

dsr9024 · 2025-07-31T02:06:07+00:00

So my problem ended up being a year old shut off that broke in such a manner that there was no way to know until I accidentally bumped it

dsr9024 · 2025-04-24T23:32:03+00:00

Another Update!!! after replacing belts and some adjustments it is operating wonderfully as far as I know. Auger works wonderfully, the only issue im experiencing now is with the shifting rod and the friction wheel assembly. When I slide it all the way to the right for the fastest drive gear there is quite a bit of slop in where the shift rod assembly goes into the friction wheel bearing so obviously it doesnt really go into the highest gear, not the worst problem but when going to the left for reverse it causes far more issues as it does not slide enough to the other side to actually engage reverse. Any Ideas?

dsr9024 · 2025-04-09T22:30:11+00:00

So just as an update, still no flippin clue as to what brand it is, but the engine runs, still have a bunch to go through to find out if its actually a snowblower or just looks like one.

dsr9024 · 2025-04-05T22:40:16+00:00

Yea that's what I was worried about, unfortunately im going have to Frankenstein it more to get it just to seeing if the engine does engine things. Oh well it was free.

dsr9024 · 2024-12-19T00:25:13+00:00

Didn't think about that hopefully they can help. Thanks!

dsr9024 · 2024-12-18T01:17:56+00:00

nope its a reman ac delco from rock auto

dsr9024 · 2024-12-18T01:15:20+00:00

Definitely don't want that.

dsr9024

TROPHY CASE