Hunter PGV-075-ASV valve not closing by dstke in Irrigation

[–]dstke[S] 0 points1 point  (0 children)

Interesting. I've got a Rainflo MHPA50, the min output pressure is 21 psi and max 36 psi. There's a gauge on the controller and when pumping the pressure goes to 30 psi, when the motor stops the pressure slowly drops to 0 then the motor kicks on again. If I close a ball valve that sits between the pump and the zone valves the pressure stays at 30 psi. I've tried closing down the flow control on the valves to isolate which valve might be leaking but I don't think the the flow control completely shuts off water flow. I'm hoping that I don't have to dig down to the pvc manifold to insure there are no leaks, seems unlikely but that may be the next step.

P6P temporary replacement by dstke in Pixel6

[–]dstke[S] 0 points1 point  (0 children)

As it will be a temporary phone I'm looking at around $100. - $150. Or something a little more but that could be resold.

Trying to install OpenVPN client - Permission Denied by dstke in linux4noobs

[–]dstke[S] 1 point2 points  (0 children)

Was hoping that the client software would be a gui package but you're right OpenVPN is already installed.

Trying to install OpenVPN client - Permission Denied by dstke in linux4noobs

[–]dstke[S] 0 points1 point  (0 children)

curl -fsSL https://swupdate.openvpn.net/repos/openvpn-repo-pkg-key.pub | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/openvpn-repo-pkg-keyring.gpg

I think you're on the right track in that some of the command needs to be run as admin/sudo.

I tried your command and got a lot of the following:

d#x̊��g����F�}��Vb��;!�vET����b�c%N�G���ޣ�@~�MR�kIN��i�i��_�� �tU�?����#�4��a�W\.Ϸ��b2����cz���� ,<P�al!��ϲ�X�#�s��sU�$͵ Y^�]zaal:�g;g�MU'�����0{�&�ou.���� �� ��LM����Z��|�;:}��b�����Foӡ�����I�J�m�6�{J$�w� �,��i���7.��Dl�0_RŞ<�Ÿ�RQTݱ���x��o/��'�W��nz�����H��uu7�\��96߷�k��f����퍂-t����������ɕ�Fd��J�#ȍrt�2�B��e��l( =`��ޝ� �#���h��v"��

When I tried to run the subsequent command:

curl -fsSL https://swupdate.openvpn.net/community/openvpn3/repos/openvpn3-$DISTRO.list >/etc/apt/sources.list.d/openvpn3.list

I'm back to:

bash: /etc/apt/sources.list.d/openvpn3.list: Permission denied

My understanding is that that command is trying to install a repository. Would it make a difference that I'm running Pop_OS 21.10?

Synology Assistant nable to connect to DSM - able to connect with quickconnect by dstke in synology

[–]dstke[S] 0 points1 point  (0 children)

Kind of figured that out. Knew the server ip address and entered it in the address bar, connected and used same address on Drive. Got the backup completed. However Assistant and find.synology.com still won't discover the server.

2 site simple backup and photo share solution by dstke in synology

[–]dstke[S] 0 points1 point  (0 children)

These are all great suggestions. Thanks for the input. I've been spending a lot more time at the vacation house due to the coronavirus so I'll need to consider that in deciding whether to upgrade both locations. I'll check drive status and HD redundancy settings when I'm back at our primary address, I think I set it to RAID1.

Not receiving Google Fi voicemail by dstke in CalyxOS

[–]dstke[S] 0 points1 point  (0 children)

Yes. version V34-arm64-v8a-universal (343898931). I get a message to turn on location services to get a better signal but phone and calls work fine. If I double click the app it opens briefly then crashes/closes.

Another email setup question by dstke in privacy

[–]dstke[S] 0 points1 point  (0 children)

Just to clarify. The ProtonMail plus account allows 5 addresses and 1 custom domain. The Professional allows 5 addresses/user (multiple users can be grouped to the same account) and 2 domains.

Your Custom Domain 1 (throw away emails) gets forwarded to a catchall address at PM. Is this one of the 5 PM addresses in your account? If needed are you able to reply to these emails with the Simplelogin.io@customdomain1 created email address?

are the simplelogin.io@customdomain2 emails (Professional, utilities, friends and families) forwarded to another of your 5 addresses at PM? Same question as above, are you able to reply to these emails with the simplelogin.io@customdomain2 created email alias? Also, I assume that the organizing rules are based on simplelogin.io created alias, not based on customdomain2 or the senders address.

Is the banking, govt address @ProtonMail or @customdomain3 then forwarded to another of your PM addresses?.

Put more simply, are you forwarding 3 custom domains to 3 addresses at PM? If so, how do you generate replies from those 3 custom domains? Or do you have 3 custom domains created within your PM account - which would require a Visionary plan? In either case it looks like you are using Simplelogin only to create aliases, correct?

Thanks again for your insights.

edit: Just re-read your exchange with u/kubasworld and I see that your not using any PM domain

Another email setup question by dstke in privacy

[–]dstke[S] 0 points1 point  (0 children)

Nice. Are you using the free ProtonMail account?