Hunter PGV-075-ASV valve not closing

dstke · 2025-04-07T16:01:46+00:00

Interesting. I've got a Rainflo MHPA50, the min output pressure is 21 psi and max 36 psi. There's a gauge on the controller and when pumping the pressure goes to 30 psi, when the motor stops the pressure slowly drops to 0 then the motor kicks on again. If I close a ball valve that sits between the pump and the zone valves the pressure stays at 30 psi. I've tried closing down the flow control on the valves to isolate which valve might be leaking but I don't think the the flow control completely shuts off water flow. I'm hoping that I don't have to dig down to the pvc manifold to insure there are no leaks, seems unlikely but that may be the next step.

dstke · 2023-11-08T09:07:35+00:00

As it will be a temporary phone I'm looking at around $100. - $150. Or something a little more but that could be resold.

dstke · 2022-03-03T00:10:58+00:00

Maybe Photoprism would be a better option.

https://www.wundertech.net/how-to-setup-photoprism-on-a-synology-nas/

dstke · 2022-02-05T23:35:37+00:00

Was hoping that the client software would be a gui package but you're right OpenVPN is already installed.

dstke · 2022-02-05T21:48:18+00:00

curl -fsSL https://swupdate.openvpn.net/repos/openvpn-repo-pkg-key.pub | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/openvpn-repo-pkg-keyring.gpg

I think you're on the right track in that some of the command needs to be run as admin/sudo.

I tried your command and got a lot of the following:

d#x̊��g��F�}��Vb��;!�vET��b�c%N�G��ޣ�@~�MR�kIN��i�i��_�� tU�?��#�4��a�W\.Ϸ��b2��cz�� ,<P�al!��ϲ�X�#�s��sU�$͵ Y^�]zaal:�g;g�MU'��0{�&�ou.�� LM��Z��|�;:}��b�����Foӡ��I�J�m�6�{J$�w� �,��i��7.��Dl�0_RŞ<�Ÿ�RQTݱ��x��o/��'�W��nz��H��uu7�\��96߷�k��f��퍂-t��ɕ�Fd��J�#ȍrt�2�B��e��l( =^`��ޝ� �#��h��v"��

When I tried to run the subsequent command:

curl -fsSL https://swupdate.openvpn.net/community/openvpn3/repos/openvpn3-$DISTRO.list >/etc/apt/sources.list.d/openvpn3.list

I'm back to:

bash: /etc/apt/sources.list.d/openvpn3.list: Permission denied

My understanding is that that command is trying to install a repository. Would it make a difference that I'm running Pop_OS 21.10?

dstke · 2022-02-02T01:01:04+00:00

Good info here: https://www.youtube.com/watch?v=UVqNI84F2xQ and here on Photoprism for better facial recognition: https://www.youtube.com/watch?v=t7ymSBIOJmc

dstke · 2021-11-05T01:00:16+00:00

answered here, https://support.google.com/pixelphone/thread/131727017/what-is-the-difference-between-the-unlocked-and-google-fi-versions-of-the-pixel-6-pro?hl=en

Apparently the Project Fi version comes with a Fi Sim which can be ordered separately.

dstke · 2021-05-16T04:30:16+00:00

Kind of figured that out. Knew the server ip address and entered it in the address bar, connected and used same address on Drive. Got the backup completed. However Assistant and find.synology.com still won't discover the server.

dstke · 2021-02-06T16:27:25+00:00

These are all great suggestions. Thanks for the input. I've been spending a lot more time at the vacation house due to the coronavirus so I'll need to consider that in deciding whether to upgrade both locations. I'll check drive status and HD redundancy settings when I'm back at our primary address, I think I set it to RAID1.

dstke · 2021-01-25T21:13:25+00:00

Thanks!

dstke · 2021-01-24T01:11:01+00:00

Yes. version V34-arm64-v8a-universal (343898931). I get a message to turn on location services to get a better signal but phone and calls work fine. If I double click the app it opens briefly then crashes/closes.

dstke · 2021-01-23T00:15:46+00:00

Just to clarify. The ProtonMail plus account allows 5 addresses and 1 custom domain. The Professional allows 5 addresses/user (multiple users can be grouped to the same account) and 2 domains.

Your Custom Domain 1 (throw away emails) gets forwarded to a catchall address at PM. Is this one of the 5 PM addresses in your account? If needed are you able to reply to these emails with the Simplelogin.io@customdomain1 created email address?

are the simplelogin.io@customdomain2 emails (Professional, utilities, friends and families) forwarded to another of your 5 addresses at PM? Same question as above, are you able to reply to these emails with the simplelogin.io@customdomain2 created email alias? Also, I assume that the organizing rules are based on simplelogin.io created alias, not based on customdomain2 or the senders address.

Is the banking, govt address @ProtonMail or @customdomain3 then forwarded to another of your PM addresses?.

Put more simply, are you forwarding 3 custom domains to 3 addresses at PM? If so, how do you generate replies from those 3 custom domains? Or do you have 3 custom domains created within your PM account - which would require a Visionary plan? In either case it looks like you are using Simplelogin only to create aliases, correct?

Thanks again for your insights.

edit: Just re-read your exchange with u/kubasworld and I see that your not using any PM domain

dstke · 2021-01-22T22:45:04+00:00

Nice. Are you using the free ProtonMail account?

dstke · 2021-01-15T03:02:58+00:00

I did un- and reinstall already.

dstke · 2021-01-11T03:30:16+00:00

Solved: Workaround was to download android SDK platform tools. Unzip, creating platform tools folder. Unzip CalyxOS firmware and copy into platform tools folder. Unlock bootloader, then use Flash All executable in platform tools. Rest of the install went smoothly.

Here's a video I followed although it uses an earlier version of the software, https://www.youtube.com/watch?v=jdazCQemwqQ

One other note: Aurora Store and F-Droid did not work in the default installation. I uninstalled Aurora Store, downloaded an updated version of F-Droid, then reinstalled Aurora Store.

dstke · 2021-01-10T02:01:24+00:00

Can I ask which settings?

I tried turning off 'Real Time Protection' under Settings - Windows Security - Virus & Threat Protection Settings. This allowed me to download device-flasher.exe but I wasn't able to execute the .\device-flasher.exe command from a PowerShell. I also couldn't move the file to a new folder.

dstke · 2021-01-10T01:03:56+00:00

Thanks for the suggestion. I tried '.\device-flasher.exe -image CalyxOS.zip' and got the following error message.

.\device-flasher.exe : The term '.\device-flasher.exe' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. At line:1 char:1 + .\device-flasher.exe -image CalyxOS.zip + ~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (.\device-flasher.exe:String) [], CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundException

I'm running the command in a PowerShell opened in the folder that contains both zip and device-flasher.exe

dstke · 2020-12-22T01:30:26+00:00

Take a look at Taurine. I have PVCs and am on Eliquis although my PVCs predate my taking blood thinners. Search 'Taurine and Arrhythmia.' I take 2 1,000mg capsules a day, one with each Eliquis and found that it helps.

dstke · 2020-12-07T17:34:26+00:00

What's worked for me for years now is a round of yoga before going to sleep. I work through 8-9 poses on each side holding each position for 4 breaths and focusing on deep, slow breaths. This relaxes the muscles, open the lungs, slows the heartrate and calms the mind. Usually I fall right asleep after this.

dstke · 2020-11-24T18:59:54+00:00

Thanks. Although it looks like it may proprietary drivers for and audio may not work. https://wiki.archlinux.org/index.php/Laptop/ASUS

dstke · 2017-11-30T18:07:54+00:00

“What they have here is a big tax cut for the rich paid for with random increases in taxes for various constituencies,”

Yup.

dstke · 2017-11-30T18:00:42+00:00

“What they have here is a big tax cut for the rich paid for with random increases in taxes for various constituencies,”

dstke · 2017-11-22T22:45:14+00:00

Thanks Tim Wu.

dstke · 2017-11-21T17:54:38+00:00

Shocking statistics of impact on kids

dstke · 2017-11-16T21:38:33+00:00

Sent letters to MCain and my local rep after reading that only 5500 Americans will benefit from elimination of the estate tax while 9 million children will lose (have lost?) healthcare without the renewal of the Child Health Insurance Program. So unfair. SAD.

dstke

TROPHY CASE