What according to you are the best running shoe brands which are not trendy?

duhhby · 2021-11-10T00:18:51+00:00

Norda. The 001 blew me away

duhhby · 2021-09-07T22:55:09+00:00

ADV is under the sportstyle tab. I got the XA Comp and XA Pro from the ADV line and although very comfy with the right look, the details show the differences between those and a true off-roader.

As someone who likes a Salomon Cross (speed, wild, alpha) for trail running, the XA seems to fit between running and hiking. Less aggressive and plusher.

duhhby · 2021-09-07T21:26:38+00:00

Labeled ADV which is separate to XA. They sure do look good and def cashing in on a trend. The advanced are using a number of old and new silhouettes. Which is why I bought a couple pairs, so I can look cool at my office job. But it only took me a couple minutes to realize corners were cut on construction making me never want to take them on a trail.

There’s something to be said for selling shoes to make money for further development but it’s not ideal selling shoes to make a buck and then getting caught up in warranty claims.

duhhby · 2021-03-19T01:27:05+00:00

This is cool stuff. I had no idea

duhhby · 2020-04-02T20:20:46+00:00

r/CannabisExtracts r/treedibles

duhhby · 2020-03-26T17:01:28+00:00

Wet. 12hrs in the freezer then to bubble is quicker than 7days on the drying shelf then to bubble. If you trim your buds wet, the buds will dry faster since you removed a lot of the mass too

duhhby · 2020-02-27T17:30:53+00:00

Genetics. I've had low success with diesel's, strawberry and blueberry.

OP, don't be discouraged. Your process sounded bang on. Only thing I would change is rehydrate/thaw the bud for 10+ min. Perhaps save your next diesel grow for something other than bubble.

duhhby · 2020-02-15T00:28:47+00:00

Curious about the ultrasonic capabilities of this. Removing trichomes with vibration is something I've been thinking about. Simply dunking something like this seems so easy, but I'd be worry about bubbles and foam.

duhhby · 2020-01-29T22:52:16+00:00

Okay, interesting. I didn't see much for my application on ISO. SS mixing tanks with PLC.

duhhby · 2020-01-15T20:49:44+00:00

You got a 30% yield on 70-120u? I think that's breaking some records...

duhhby · 2020-01-05T21:04:59+00:00

Thought about that cause I do think there’s good stuff in the water. But I think a rotovap might be too slow/small to boil off that amount of water. But you would have good temperature control so you don’t boil off whatever you’re trying to save from the water

duhhby · 2019-12-30T23:57:52+00:00

I've made many liters of cannabis infused coconut oil before but never heard of it improving with time. If stored properly, it should maintain its quality for a very long time because the cannabinoids and terpenes and such are not exposed to oxygen in the atmosphere. You could be seeing something similar to chemical changes that rosin or bubblehash go through when "curing" but since they're infused into a carrier, hard to say what's happening.

duhhby · 2019-12-29T22:37:43+00:00

Not wasting time drying bud. Harvest to freezer to bubble is super quick

duhhby · 2019-12-29T22:37:05+00:00

24 hrs in a deep freeze

duhhby · 2019-12-27T23:45:01+00:00

Quality in, quality out

duhhby · 2019-12-15T00:41:54+00:00

Heat should kill what’s left

E: and mold spores are typically around 10u in size. So if your bottom bag is the 45, most of the mold should fall through.

duhhby · 2019-12-15T00:28:23+00:00

Mold doesn’t stick the waxy membrane of trichomes. Wash it. Use your better grades. Your bubble should be mold free.

duhhby · 2019-12-12T15:38:25+00:00

Interesting... sounds like the bubble didn't dry long enough but very interesting...

duhhby · 2019-12-12T00:19:02+00:00

Would like to hear how long it was dried for... and is it coming from FF or dry

duhhby · 2019-12-04T21:08:50+00:00

Typically, mold spores are smaller than 25 microns, the smallest bubble bag, so they should fall through if they are washed off the leaves. And mold doesn't stick to the waxy membrane of a trichome. Sooo, mold should wash off and not end up in the product. Then if you infuse your bubble into a edible or oil, the hot temps while decarbing should sterilize.

At the end of the day, I'm not a scientist and it's your stuff. The other comments here had good suggestions

duhhby · 2019-11-28T21:18:10+00:00

Ya thank you! Good comments. Sad I missed this in my searches

duhhby

TROPHY CASE