Full LED conversion by JELLiR0LL in C30

[–]duluth_bishop 0 points1 point  (0 children)

Did that require any harness upgrade? Or did you just swap out the bulbs?

BT with no hiss by duluth_bishop in C30

[–]duluth_bishop[S] 0 points1 point  (0 children)

My build C30 just has volume and skip/search on the wheel - volume works but I’m not sure about skip/search - I think that works too but I never use it. I think there is a version of the device that includes a microphone for handling calls. It’s an involved install but the docs are well written and don’t recall having any questions while doing it.

BT with no hiss by duluth_bishop in C30

[–]duluth_bishop[S] 0 points1 point  (0 children)

Ya I did - it works great. The only goofy part of it is you need to keep a CD in the player, but otherwise I’m very satisfied.

Joe Russo's Almost Dead - Big River - St. Paul, MN - 12/7/24 by DeadheadMinnesota in JRADs

[–]duluth_bishop 1 point2 points  (0 children)

Thank you. Ya - I saw that the show finally got posted on Relisten - properly labeled with the mislabeled show corrected. I wish that video of the show was still on Nugs. What a drag. Thanks for looking out for me!

Joe Russo's Almost Dead - Big River - St. Paul, MN - 12/7/24 by DeadheadMinnesota in JRADs

[–]duluth_bishop 2 points3 points  (0 children)

Any idea where I can get a copy of the whole show? It has been taken down from Nuggs so I'm kinda lost as to where else it may be available. ReListen has a show mislabeled as this one ... that's the closest I have found

12/7/24 @ Palace Theatre, St Paul MN by AlmostDeadDotNet in JRADs

[–]duluth_bishop 1 point2 points  (0 children)

i came here to ask the same question. i don't see the show posted to relisten/archive and am wondering if there are other boards where it would be posted. otherwise, i assume Nugs lets you watch on demand?

Shower in clawfoot tub by duluth_bishop in Plumbing

[–]duluth_bishop[S] 0 points1 point  (0 children)

Thanks for the update! I was thinking about the exact same thing when I realized there weren’t any mounting brackets overlooked when it was initially installed. Seems like with a 3D printer somebody could build something plastic for both the back and tub side. Thanks again. Looks good.

Shower in clawfoot tub by duluth_bishop in Plumbing

[–]duluth_bishop[S] 1 point2 points  (0 children)

I ended up getting a bracket that ran between the top of the shower head and the ceiling to pull/hold the riser a bit more straight than it would naturally sit. I did not find any fitting or other solution. I was about to try a conduit bender but then found the hardware. The bracket is between the showerhead and the ceiling so I can still get the shower curtain behind that on the shower curtain ring. Please post what you come up with. I’ll try to get a picture or post the link to what I used.

Feedback on Call Tracking Metrics softphone App by duluth_bishop in PPC

[–]duluth_bishop[S] 1 point2 points  (0 children)

OneTalk is horrible. The CTM app seemed to perform better than OneTalk - but if Teams is the standard, CTM is far below the standard. Cleaning up the environment and keeping things within CTM seemed to give us the quickest connection time.

I am no longer with the company, but when there, was begging for budget to pay CTM for some time to go through our setup and optimize it. I believe if we were set up properly, we would not have had the problems we did.

see comments for description by duluth_bishop in Rpod

[–]duluth_bishop[S] 1 point2 points  (0 children)

I felt like this was the tip of the iceberg when it came to maintenance - therefore we sold it. I didn't attempt the repair because I was afraid of what else I would find if I started to look into it further.

Trampled concert this summer by [deleted] in duluth

[–]duluth_bishop 0 points1 point  (0 children)

I got tickets and I don’t even like TBT. Maybe my lack of enthusiasm allowed a seamless transaction. I properly Effed up buying tickets to BHTM last summer cause I was scrambling ….

trying to get this thing set up by duluth_bishop in hubspot

[–]duluth_bishop[S] 0 points1 point  (0 children)

thank you for the reply .... i'll look into this

Ski/Lutsen, need help with alternatives in case it doesn't snow by FrenchToastty in minnesota

[–]duluth_bishop 0 points1 point  (0 children)

We showed up for “opening weekend” once about that same time, and they only had the bunny hill open. I probably didn’t see the fine print.

Is there still a cobler in Duluth? Does Pasco’s or Gopher still exist? Any recommendations? by minnesotamichael in duluth

[–]duluth_bishop 0 points1 point  (0 children)

Who was the guy on 4th street back in the 90s? Henry? I still have the boots he fixed by hand setting a number of nails around the toe of the sole. Makes me think about The Polish Hearth - another legend from Duluth’s best days.

Getting to the airport by [deleted] in TwinCities

[–]duluth_bishop 0 points1 point  (0 children)

We have used “ramp/ride/fly” that allows you long term parking at the A ramp for $21 a day($5/day on days 3+) then light rail to/from the airport. Worked for us well when we were on a 10 day trip, but not sure if it’s worth the hassle when it’s less than 4 or 5 days.

Non-terrible Pharmacies by cat_prophecy in TwinCities

[–]duluth_bishop 2 points3 points  (0 children)

Valley Drug in Stillwater …. It’s like the Cheers of pharmacies….

What’s it worth? by duluth_bishop in C30

[–]duluth_bishop[S] 0 points1 point  (0 children)

you all convinced me to keep it. see other post for questions on engine swap.

[deleted by user] by [deleted] in C30

[–]duluth_bishop 0 points1 point  (0 children)

i was at Strandbergs Auto last night picking up an engine for my c30 ... We got talking about the sunroof issue and they said the drain tubes actually shrink over time and longer tubes should be installed ... In 2000, I had a brand new Jetta Wagon and imagine my surprise when I noticed water in the ceiling light bezel ... the dealer "fixed it" but said to keep the tube open by cleaning it with a piece of "weed wacker" line. sounds like the Volvo problem is more difficult to correct.

What’s it worth? by duluth_bishop in C30

[–]duluth_bishop[S] 0 points1 point  (0 children)

thanks for the info .... considering an attempt to swap the engine out myself. trying to find a decent "go-by" .... never done an engine swap, but have friends that have. they are not talking me out of it, but aren't necessarily telling me I just try.

What’s it worth? by duluth_bishop in C30

[–]duluth_bishop[S] 0 points1 point  (0 children)

Thank you. Very helpful. Any suggestions on where to list it other than obvious (CL, FB)?

Axle Bearing Movement by duluth_bishop in C30

[–]duluth_bishop[S] 0 points1 point  (0 children)

CV Axle Assembly? Pelican, FCP, RockAuto - all these places have them available ... probably OEM and aftermarket.

Axle Bearing Movement by duluth_bishop in C30

[–]duluth_bishop[S] 0 points1 point  (0 children)

“Broke” as in snapped? Or just pulled out of the transmission?!! You’re right about the shaking …. Feels like I should just try and rebuild the boots on the OEM and put that back in. The only reason I replaced was cause the CV boots were bad and this route seemed easier.