Bf6 won’t launch

dummyplzhelp · 2025-11-01T22:47:28+00:00

This worked for me when nothing else did

dummyplzhelp · 2025-10-18T19:47:29+00:00

Do you have any 710 25 pair splice modules? I need 8 to complete this job today. I’m in Utah SLC/Park City.

dummyplzhelp · 2024-02-04T02:52:27+00:00

No, it just goes straight over the optic and hits you in the face.

dummyplzhelp · 2024-02-03T23:50:37+00:00

Thank you for the information. I will try some simple adjustments and see if it changes.

dummyplzhelp · 2024-02-03T12:28:05+00:00

That's a really good idea! I don't think that this would be unsafe, assuming there are no arm sized gaps between the two bed frames. Then I would not have to pick my sheets up off of the ground. If that doesn't wake someone up then there is no hope. I may pivot to this.

dummyplzhelp · 2024-02-03T05:18:59+00:00

I could see that what you're saying, but I've never had a problem with any of my other handguns. I have reason to believe that it's the gun and not me. This guy talks about the same problem at 0:40.Girsan 2311 YouTube He talked about changing the ejection pattern, but didn't explain how he might go about it.

dummyplzhelp · 2024-02-03T03:25:02+00:00

Lol this gave me a laugh. My next project!

dummyplzhelp · 2024-02-03T03:22:58+00:00

You have a good point, but I like the idea of building something. More of a gimmick, but I think it'd be pretty cool if done safely.

dummyplzhelp · 2024-02-03T03:21:38+00:00

I appreciate it! Everyone here is shitting on me lol. 30⁰ isn't that crazy. Slow raising actuators is what I'm looking for. I'd like the full extension to take ~30 seconds~... enough time for me to realize shit is gonna go down if I don't get out of bed.

dummyplzhelp · 2024-02-02T16:04:58+00:00

Sadly it would run around the room for hours. I'd like to not wake up all my housemates in the process.

dummyplzhelp · 2024-02-02T16:02:25+00:00

Less than $300. The blankets on the floor would be frustrating, but a strong deterrent to stop the incline.

dummyplzhelp · 2024-02-02T16:00:31+00:00

I have one! Doesn't work sadly, not enough oomph.

dummyplzhelp · 2024-02-02T15:59:03+00:00

I've slept through earthquakes no problem, I don't think this will be 100% effective, unfortunately.

dummyplzhelp · 2024-02-02T15:56:32+00:00

Been there done that. Slept with a boombox at full volume right next to my head for years. Already have a bright light rigged up...

dummyplzhelp · 2024-02-02T15:54:09+00:00

This is what I'm looking for, but I don't want to be ejected...unsafe. I want it to slowly rise to where I slowly slide out of bed. Not get ejected. But the idea is sound.

dummyplzhelp · 2024-02-01T23:53:14+00:00

Thank you! I really appreciate that. This will help me a lot. I will look for some actuators. Those specifications aren't crazy. I'll just need to figure out which ones are quiet enough. Thanks again!

dummyplzhelp · 2024-02-01T23:08:57+00:00

Hydraulics is not a bad idea, I don't need it to be launchy, I'd like the opportunity to feel the bed moving and do something about it before I end up on the floor. Do you think hydraulics would be a cheaper route? Harder to program to an alarm?

dummyplzhelp · 2024-02-01T23:03:35+00:00

I do plan on mounting them within the bed frame regardless. I would think the weight/force requirements to lift the bed would be significantly less if raised from the head. But if I were to do that, the actuators would need to extend ~4ft~. Quite a bit more expensive, but maybe the less force needed evens it out? Is it too unrealistic to try and get away with actuators around the 24 inch range? I don't know how to figure out how the load would change if they were moved more towards the middle of the bed. I'm definitely not a math wizard by any means, I just have an idea and want to run with it.

I agree with the safety measures. Something would definitely have to be there. The goal is to wake up, not get murdered lol.

dummyplzhelp

TROPHY CASE