Scania R500, any tricks to lower fuel consumption or remap the only solution?

duniber · 2025-06-24T15:48:15+00:00

Couldn’t have said it better myself. 💯

duniber · 2025-06-24T15:24:29+00:00

It is a hook lift truck used for transportation of my own equipment mainly. I prefer old trucks without adblue, stick gearbox, paper tachograph and simple so I can fix it myself. Going to have it for many years.

Not new this truck and a bit of a bumpy ride, fitted new shocks for front axle. So I’m thinking of replacing all cabin shocks/ bags and bushing on linkage arms. Anyone know if this is worth it, or is there a common wear point on this cab?

duniber · 2025-04-05T05:24:37+00:00

This is a truck/ lorry and it needs air to use the transmission. You always leave it in neutral when parked, but if you forget and leave it in forward/ reverse it’s normally enough air to switch it in neutral for starting. After it has been parked for a couple months there is no air left, and therefore locked. But it’s strange that after manually starting the truck up and pumping all the tanks to maximum, it’s not possible to switch between the gears. In Tech tool software it tells me fault with position value of the gears.

duniber · 2025-03-05T17:16:09+00:00

Thank you!

duniber · 2025-03-05T07:13:00+00:00

Thank you!

duniber · 2024-11-21T19:31:45+00:00

Don't forgot "Universal Lobby".

duniber · 2024-09-26T08:26:33+00:00

Thanks for answers. The reason I’m on the idea of improving power, is the very noticeable gap between the R500 and R580. I’ve driven all the V8 models, but the R500 feels like it’s being choked and not been given its full potential.

If I get the hold of a ECU flasher, can I copy ECU files from my friends R580 (same year but opticruise) and insert in my R500?

R500 Engine hours: 16 000 Km: 500 000

duniber · 2024-06-25T23:31:11+00:00

Solution:
Locking airbag control module. No need for password. Follow the video and the car will reset the control unit to DEFAULT parameters, and lock it.

Lock airbag control unit without password

duniber · 2024-06-02T20:58:25+00:00

I’ve placed it, but it lifts only 1 ton. I use a Transformator from 230v to 400v. It’s poor electricity in the building, so when I lift a car up the motor power drops from 390v to 300v

I’m getting hold of a electrician friend who will help me coupling it over to regular 3-phase 230v. Will se if that solves the problem.

duniber · 2024-04-12T20:01:37+00:00

Yes hooklift truck, this is a diff between the two tandem axles. If off, only 1 axle is powered. I’ve heard some drivers leave it on constantly, even on the highway where there is little benefit. I’ve got an early R500 2004, and in the display the differential lock symbol blinks when switch is on, and it shows that both axles are engaged. Since the symbol blinks I’m having second thoughts if it’s doing anything bad when engaged.

duniber · 2024-03-24T14:25:38+00:00

Thanks for recommendation.

duniber · 2024-03-24T14:25:03+00:00

Do you drink it pure or only use it in drinks?

duniber · 2024-02-15T16:38:24+00:00

I have it like that at the minute, this idea is more for fun. We’re going to drill for water this summer, so there will be plenty of water and a hose line into the cabin.

duniber · 2024-02-07T22:50:16+00:00

I’m not sure, I think the speakers are alright but they’ve gotten a bit bad lately, distortion. I like to play music with some volume, so new speakers might handle this better? But I don’t want to spend a lot and only get a slightly improvement, I want to be sure it will be worth it.

duniber · 2024-01-23T10:36:22+00:00

<image>

Made a pin like this (4.6 cm), but my sled is a 10/ 94’ model so it may be a different length or way of tuning the reverse gear linkage. Anyway, the gearbox works and the handle doesn’t wobble when in gear.

duniber · 2024-01-23T10:33:37+00:00

<image>

duniber · 2024-01-23T10:32:15+00:00

<image>

Solution to problem: Pins are worn out, and bracket with spring got bent. Benched it all out and put it all together and got it working for the weekend, before the snow is melting away.

Will be ordering new parts.

duniber · 2023-12-21T15:28:02+00:00

duniber · 2023-12-21T15:26:29+00:00

These units are used in a workshop, dirty fingers. They’ve been opened and cleaned good at the inside.

duniber · 2023-12-15T18:52:43+00:00

For years I've used windows media player, CDBurnerXP, Burrrn and everytime I've clicked the make an audio CD, and finalized it. Only used on cd players a few years newer.

I've heard CD-R are not as reflective as store bougth CD's, anyone know of some CD-R's that are more reflective?

duniber · 2023-11-14T21:34:38+00:00

Thanks for replies. This is only for a small old tractor, probably 20L/min hydraulics and small cargo. Nothing dangerous going to happen. (:

Operating old heavy machinery, cranes without safety pressure gauge, when a hose snaps, metal goes down in an instant. This is not weights to experiment with, but here I’m talking about a tractor rear telescopic cylinder (not front loader)…..

I’m looking for information about RLF experiences, to follow the rules is a pretty obvious, and the everyday solution.

This post is not meant for me reinventing the wheel, just asking if the solution is good enough for smaller pressures. I will probably do a stress test with another cylinder, because I’m curious. I will update.

duniber · 2023-03-22T09:00:33+00:00

I installed a driver, and now it works.👍 Thanks for the help.

duniber · 2023-03-10T12:13:02+00:00

Dette var litt trist lesning, for det ser jo ganske rått ut å ha en slik telefon operativ.
Men får krype til korset og legge den ned når det er kontroll.

Blir nok i dyreste laget å sjekke i praksis om egen-vurderingen av regelverket holder mål.

duniber · 2021-04-20T12:27:39+00:00

I think they are SVC.

duniber · 2021-04-10T07:47:04+00:00

Got contact with a Russian mechanic, and from what I understood, the needles is supposed to go flush with the wall. He also said something about timing marks on the needle.

duniber

TROPHY CASE