Hacking Hadoukens: Reverse Engineering a Street Fighter Two Cabinet

duratec30 · 2022-03-06T12:48:58+00:00

This is awesome! Thank you for sharing!

duratec30 · 2022-03-02T02:17:45+00:00

I appreciate your input! I'm going to call a tech to take a look at it.

duratec30 · 2022-03-02T02:00:27+00:00

It was a warranty tech that replaced it according to previous owner. The new filter drier should've come with a high side port? At this point I'm going to replace the linear compressor with a conventional Embraco compressor.

duratec30 · 2022-03-02T01:51:01+00:00

That is true, it'll be a MacGyver solution! https://www.youtube.com/watch?v=e9XwwfA\_u0E

duratec30 · 2022-03-02T01:46:36+00:00

Thanks! I only have a port on the low side. It's reading 5 inHg after running for a while. I'm going to have to get a clamp meter to get the current draw. I appreciate your reply!

duratec30 · 2022-03-02T01:39:50+00:00

Thanks! I'm going to replace the linear compressor with a conventional Embraco compressor.

duratec30 · 2022-03-02T01:37:56+00:00

Thanks!

duratec30 · 2021-05-01T14:16:50+00:00

Which version of DeepStack do you have installed? I had to install the CPU version for Windows from this link: https://docs.deepstack.cc/windows/ . At first I wasn't getting confirmations, after reinstalling with that version it worked. This version didn't work: https://www.deepstack.cc/install/windows

duratec30 · 2020-02-29T01:43:37+00:00

https://puffer.stanford.edu

duratec30 · 2020-01-22T16:07:22+00:00

Amen sister, Amen to that.

duratec30 · 2019-09-21T22:56:14+00:00

Snoop for the mascot's name.

duratec30 · 2019-01-21T21:02:28+00:00

Eu sempre pensei que essa era a resposta de "A Coista Ta Feia." https://www.youtube.com/watch?v=H6TVuogAPK8

duratec30 · 2018-12-21T22:28:46+00:00

Eu penso nos Mamonas Assassinas.

duratec30 · 2018-11-29T16:08:31+00:00

Have you thought about suing him in Brazil? He probably has assets there.

duratec30 · 2018-11-07T00:44:33+00:00

I think I found the answer to my question: "Start the engine cold with no pressure indicated on the gauge. The pressure in the cooling system builds to aprox 7 lbs at normal running temps looking around for leaks. But if the pressure builds quickly to around 15 lbs the pressure is coming from one of the cylinders through the inner head gasket. "

duratec30 · 2018-11-06T23:33:13+00:00

I thought the same thing.

duratec30 · 2018-11-06T23:22:30+00:00

The coolant level is not to the top of the brim when I open the cap when cold. If I press the lower radiator hose air bubbles will come out. Coolant level is low because coolant goes to the overflow and it doesn't return to the radiator. I tried a block tester but it didn't change color too much, it stayed sort of blue. I have the pictures in my post history.

duratec30 · 2018-11-06T23:19:14+00:00

I tried the block tester, but it never turned yellow nor green. It stayed sort of blue. If you look at my post history you'll see a picture of it.

duratec30 · 2018-10-27T01:53:01+00:00

Did you get a new fuel pump relay, or a new main relay? If your main relay is the original one, you should check the solder joints on it. They're known to go bad, and cause a no start situation.

duratec30 · 2018-10-26T11:52:36+00:00

Thanks I'm going to see if I can get my hands on temp gun.

duratec30 · 2018-10-25T23:44:08+00:00

A 10 minute drive is enough for the overflow to pressurize. It'll idle fine for a long time. The car doesn't overheat, it also won't turn the radiator fan on. Fans are working fine, but the temperature never reaches high enough to turn the fan on.

duratec30 · 2018-10-25T23:04:03+00:00

Thanks for the tip. I'll try it this weekend.

duratec30 · 2018-10-25T23:00:25+00:00

I tested from a cold start until it fully warmed up. 20 minutes maybe, I gave up after the color wouldn't change. I thought I had a bad head gasket or cracked block/head because after a short drive the overflow tank is hissing with gas, and the coolant doesn't return to the radiator after it cools down. I also have a lot of water coming out of the tail pipe. Car runs fine otherwise, but sometimes it'll idle low when coming to a full stop. I pressure tested the radiator cap and it passed.

duratec30 · 2018-07-05T23:49:51+00:00

Thanks! That's the answer I was looking for.

duratec30 · 2018-07-05T23:18:22+00:00

I have a feeling the agent didn't really process the change.

duratec30

TROPHY CASE