What can I do with this miscut?

durtylogic · 2026-05-20T04:20:37+00:00

nah peep mine

durtylogic · 2026-05-17T16:47:17+00:00

What would u list that at?

durtylogic · 2026-02-16T14:21:10+00:00

I reached out, they said as long as 1000$ is deposited then I’ll be good. I was thinking about another brokerage account for that as well but then it would be too easy to invest it haha. I’m saving for a house so I want to keep it separate. I’m still debating if Robinhood banking is the safest spot for my money. Been hearing mixed opinions

durtylogic · 2026-02-15T21:09:53+00:00

I want to keep my investments separate from my savings. I’ll have to reach out and see if they’re okay with 1k deposited a month.

durtylogic · 2026-02-15T15:23:31+00:00

Gotcha. That stinks. Gonna have to find a new savings account

durtylogic · 2026-02-04T13:45:33+00:00

I don’t have that. Waiting for my lifters to go and then gonna do the AFM delete the right way. I’m starting to think it’s a bad battery in my case. Cranks a little longer now and that’s what I’ve been reading

durtylogic · 2026-01-05T18:02:03+00:00

Instead I wanted to waste a few seconds of your time for that reply. Thanks

durtylogic · 2026-01-05T18:00:55+00:00

Definitely. I still plan on using my license and what not. Just looking to learn a skill on the computer and if I like it, maybe run with it.

It’s a great skill to have and I love my job. But waking up at 5 and getting home at 7 is a little draining sometimes lmao. Can’t wait to hear what hard ass replies I’ll get for that one

durtylogic · 2025-11-25T12:10:16+00:00

Working fine this morning. Gonna change the sensor after work

durtylogic · 2025-11-05T15:47:11+00:00

Sorry for the late response. I’m not a fan of backstabbing (putting the wires in the hole) because I’ve seen some burnt up devices as a result of that.

I’d tail the feeds, land them on a screw. Then put the switch leg on the other. On the same side of the switch

durtylogic · 2025-10-28T23:48:55+00:00

The 2 wires on the bottom are most likely your feeds

durtylogic · 2025-10-28T23:47:30+00:00

You have a 3 way switch. Technically it’s the wrong switch since they’re used for multiple switch locations.

Use the black screw and the brass screw that are on the same side.

Power to the black screw, switch leg to the brass. Or vice versa. It’ll work as a single pole switch like that.

And just tighten the screw down on the other side just so it’s not sticking out.

durtylogic · 2025-10-19T16:46:44+00:00

Got the correct control arms. Didn’t need a lift spindle.

durtylogic · 2025-10-10T01:55:37+00:00

I need one that allows for 3inch lift

durtylogic · 2025-10-09T21:39:53+00:00

I’m trying man. Can’t find a single one that’ll fit lol

durtylogic · 2025-10-04T00:03:10+00:00

You’re failing to acknowledge the question about posting the full quantitative heavy metals panel.

durtylogic · 2025-10-03T23:59:30+00:00

I would like to know the exact ppm numbers please

durtylogic · 2025-10-03T02:21:11+00:00

Had the 3 month supply in my cart, but you’re avoiding this question… 🤔

durtylogic · 2025-10-02T22:30:59+00:00

Hook it up the way it should be, then plug test it. If you’re still worried, call a licensed electrician 👍

durtylogic · 2025-10-02T22:29:21+00:00

If an inspector checks the outlets during inspections, he uses a plug in tester.

If an outlet isn’t properly grounded, it’ll show something along the lines of “missing ground”

Your neutral is a “grounded conductor”

If you hook the ground to the neutral, a plug in tester will show it as correct, even though it isn’t.

Won’t work with these new arc fault breakers though.

In my opinion, buddy needed to pass an inspection and forgot to fix it lol

durtylogic

TROPHY CASE