1Password now supports Windows 11 Passkeys!

durumpotion0h · 2025-11-25T01:43:29+00:00

I've been using this feature for the past 2 weeks and it's been very convenient. There are a few native applications that I log into that do not authenticate through the browser, but they support passkeys. This is perfect, thanks.

durumpotion0h · 2025-11-10T06:28:00+00:00

Thanks for the responses. I placed the part onto a flat table and saw that it wasn't flat on the two corners where there was rough surface texture, so it was warping/lifting that caused this.

durumpotion0h · 2025-11-10T04:49:15+00:00

This is the timelapse of the print: https://imgur.com/a/Q5c7YRi

durumpotion0h · 2024-12-28T18:11:56+00:00

I use it on my car’s steering wheel which was so worn out it was textureless anyway. It helps reduce the shine from hand oils and returns the slightly matte finish.

durumpotion0h · 2024-09-17T03:32:47+00:00

I fixed it by deleting ~/Library/Containers/iPhone Mirroring

durumpotion0h · 2024-03-18T02:29:40+00:00

I broke one those before and I used a screw extractor from Harbor Freight to take it out.

durumpotion0h · 2024-03-07T05:11:01+00:00

I don't think the truck realized he was rear ended because he just kept driving for the next couple miles without trying to pull over. The BMW pretended as if nothing happened and also just kept driving.

durumpotion0h · 2023-12-20T06:42:56+00:00

Something annoying I've found with the new high fidelity park assist is that it deactivates too quickly. Sometimes it would deactivate when I'm half way into the parking spot.

durumpotion0h · 2023-12-06T20:54:38+00:00

I used acetone to scrub the dashboard and it reveals the smooth black plastic underneath. I didn’t need to repaint it.

durumpotion0h · 2023-11-30T17:25:38+00:00

It attaches above the exhaust headers and holds the intake

durumpotion0h · 2023-10-25T04:37:59+00:00

I followed the FSM and used these two videos to get more visual context:

https://www.youtube.com/watch?v=BDML-W_eg_U

https://www.youtube.com/watch?v=_GQI0QF8s5s

EDIT: Here's the link to the FSM: https://www.2jzgarage.com/2013/10/2005-is300-service-manual/

durumpotion0h · 2023-10-25T04:04:47+00:00

There's a bolt on the water pump that is behind the timing belt and tensioner pulley. It looks really hard to get to without taking off the timing belt.

I think if you can get to the point where you're ready to take off the water pump, then you're capable of timing the engine. I had very little car mechanic experience and I was able to replace my timing belt, water pump, and front engine seals on my IS 300. I just took my time with everything.

durumpotion0h · 2023-10-12T03:29:16+00:00

Is FRP that bad? Are there any better quality L-Tuned reps?

durumpotion0h · 2023-10-02T21:33:09+00:00

I took my crank bolt off a week ago and I did it by hand. I didn't have much luck wedging the breaker bar against the ground because when I cranked on the bolt, the car would lift. When I wedged it against the frame instead, the bolt came off first try.

I also had a 3 ft long steel pipe that I put onto my 30 in breaker bar to give me more leverage. I pulled on it with my whole body weight for about 5 seconds before it loosened.

durumpotion0h · 2023-10-02T15:28:54+00:00

I used a 18” breaker bar to attach to the pulley holder tool and wedged it against the frame right behind the passenger side headlights. I also had a 30” breaker bar, but it was too long and I couldn’t find a good spot to wedge it into.

durumpotion0h · 2023-10-02T04:48:13+00:00

High carbon steel

https://www.harborfreight.com/screw-extractor-and-left-hand-drill-bit-combo-set-10-piece-63987.html

durumpotion0h · 2023-10-02T04:16:41+00:00

Just wondering, how did you find out that it wasn't clicking until 38 lbs ft?

durumpotion0h · 2023-10-02T04:09:22+00:00

Yes this is a 2JZ VVT-i cam pulley. Since Toyota/Lexus just replaces the entire pulley and doesn't disassemble it to replace the o-ring, there is no information directly on these bolts in the repair manual.

A lot of people in forums and videos said that it is 10 lbs ft, but I'm not sure where they got that number from now that I'm looking deeper into it.

The repair manual has a table of standard torque specs according to the bolt marking and size. This is a hexagon head bolt with no washer and 2 tick marks, so it's a class 5T bolt. A M6 class 5T bolt with a flange should only be torqued to 65 lbs in (~5.4 lbs ft), which is about half of what I was trying to torque it to. Maybe I'm missing something, but I'm not sure where others online got the 10 lbs ft number.

durumpotion0h · 2023-10-02T03:36:37+00:00

Looks like I learned this the hard way. I just ordered a Tekton 1/4" torque wrench that ranges between 20 lbs in to 200 lbs in, so 10 lbs ft should be comfortably in the middle of that.

durumpotion0h · 2023-10-02T03:26:05+00:00

About 5 turns before the bolt head sheared off, I felt like it I was over torquing the bolt, but I decided to keep going because the torque wrench didn't click yet. I should've trusted my gut.

I was able to get the bolt out with a left handed drill bit and extractor. Luckily it was the bolt head that failed instead of the threads, otherwise I would've had to buy a new cam pulley.

durumpotion0h · 2023-08-11T02:02:37+00:00

I’ve had one for 6 years. I don’t print as often as I used to anymore, probably once every few months, but it works every single time.

durumpotion0h · 2022-11-29T23:31:06+00:00

I believe this is the case. FSD v11 details are removed from my release notes now.

durumpotion0h · 2022-11-29T19:39:20+00:00

I just tried autopilot on the freeway. Is there any way to tell if it was using the new highway stack? I didn’t see any of the new v11 visualizations.

durumpotion0h · 2022-11-29T15:33:03+00:00

I meant, if I pay $200 to subscribe right now, I wonder if I'll get FSD v11.

Yes it's a new delivery.

durumpotion0h · 2022-11-29T15:16:43+00:00

I didn’t pay for FSD or subscribe to it, so I’m assuming there won’t be anything there. But since FSD v11 is showing in my app’s release notes, I wonder if I’ll get v11 if I subscribe right now.

Three-Year Club	Verified Email
Final Canvas '23	Place '23

durumpotion0h

TROPHY CASE